From: Kurt Borja <kuurtb@gmail.com>
To: kuurtb@gmail.com
Cc: Dell.Client.Kernel@dell.com, hdegoede@redhat.com,
ilpo.jarvinen@linux.intel.com, linux-kernel@vger.kernel.org,
mario.limonciello@amd.com, platform-driver-x86@vger.kernel.org,
w_armin@gmx.de
Subject: [RFC PATCH 04/21] alienware-wmi: Improve sysfs groups creation
Date: Wed, 4 Dec 2024 21:39:40 -0300 [thread overview]
Message-ID: <20241205003939.2184799-2-kuurtb@gmail.com> (raw)
In-Reply-To: <20241205002733.2183537-3-kuurtb@gmail.com>
Devices with hdmi_mux, amplifier or deepslp quirks create a sysfs group
for each available feature. To accomplish this, helper create/remove
functions were called on module init, but they had the following
problems:
- Create helpers called remove helpers on failure, which in turn tried
to remove the sysfs group that failed to be created
- If group creation failed mid way, previous successfully created groups
were not cleaned up
- Module exit only removed hdmi_mux group
To improve this, drop all helpers and let the platform driver manage these
sysfs groups, while controlling visibility with their respective quirks.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
drivers/platform/x86/dell/alienware-wmi.c | 114 ++++++++--------------
1 file changed, 38 insertions(+), 76 deletions(-)
diff --git a/drivers/platform/x86/dell/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index 115b3aa5637b..78bbb4ef4526 100644
--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -417,12 +417,6 @@ static struct platform_zone *zone_data;
static struct platform_profile_handler pp_handler;
static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
-static struct platform_driver platform_driver = {
- .driver = {
- .name = "alienware-wmi",
- }
-};
-
static struct attribute_group zone_attribute_group = {
.name = "rgb_zones",
};
@@ -803,6 +797,12 @@ static DEVICE_ATTR(cable, S_IRUGO, show_hdmi_cable, NULL);
static DEVICE_ATTR(source, S_IRUGO | S_IWUSR, show_hdmi_source,
toggle_hdmi_source);
+static bool hdmi_group_visible(struct kobject *kobj)
+{
+ return quirks->hdmi_mux;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(hdmi);
+
static struct attribute *hdmi_attrs[] = {
&dev_attr_cable.attr,
&dev_attr_source.attr,
@@ -811,25 +811,10 @@ static struct attribute *hdmi_attrs[] = {
static const struct attribute_group hdmi_attribute_group = {
.name = "hdmi",
+ .is_visible = SYSFS_GROUP_VISIBLE(hdmi),
.attrs = hdmi_attrs,
};
-static void remove_hdmi(struct platform_device *dev)
-{
- if (quirks->hdmi_mux > 0)
- sysfs_remove_group(&dev->dev.kobj, &hdmi_attribute_group);
-}
-
-static int create_hdmi(struct platform_device *dev)
-{
- int ret;
-
- ret = sysfs_create_group(&dev->dev.kobj, &hdmi_attribute_group);
- if (ret)
- remove_hdmi(dev);
- return ret;
-}
-
/*
* Alienware GFX amplifier support
* - Currently supports reading cable status
@@ -858,6 +843,12 @@ static ssize_t show_amplifier_status(struct device *dev,
static DEVICE_ATTR(status, S_IRUGO, show_amplifier_status, NULL);
+static bool amplifier_group_visible(struct kobject *kobj)
+{
+ return quirks->amplifier;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(amplifier);
+
static struct attribute *amplifier_attrs[] = {
&dev_attr_status.attr,
NULL,
@@ -865,25 +856,10 @@ static struct attribute *amplifier_attrs[] = {
static const struct attribute_group amplifier_attribute_group = {
.name = "amplifier",
+ .is_visible = SYSFS_GROUP_VISIBLE(amplifier),
.attrs = amplifier_attrs,
};
-static void remove_amplifier(struct platform_device *dev)
-{
- if (quirks->amplifier > 0)
- sysfs_remove_group(&dev->dev.kobj, &lifier_attribute_group);
-}
-
-static int create_amplifier(struct platform_device *dev)
-{
- int ret;
-
- ret = sysfs_create_group(&dev->dev.kobj, &lifier_attribute_group);
- if (ret)
- remove_amplifier(dev);
- return ret;
-}
-
/*
* Deep Sleep Control support
* - Modifies BIOS setting for deep sleep control allowing extra wakeup events
@@ -936,6 +912,12 @@ static ssize_t toggle_deepsleep(struct device *dev,
static DEVICE_ATTR(deepsleep, S_IRUGO | S_IWUSR, show_deepsleep_status, toggle_deepsleep);
+static bool deepsleep_group_visible(struct kobject *kobj)
+{
+ return quirks->deepslp;
+}
+DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(deepsleep);
+
static struct attribute *deepsleep_attrs[] = {
&dev_attr_deepsleep.attr,
NULL,
@@ -943,25 +925,10 @@ static struct attribute *deepsleep_attrs[] = {
static const struct attribute_group deepsleep_attribute_group = {
.name = "deepsleep",
+ .is_visible = SYSFS_GROUP_VISIBLE(deepsleep),
.attrs = deepsleep_attrs,
};
-static void remove_deepsleep(struct platform_device *dev)
-{
- if (quirks->deepslp > 0)
- sysfs_remove_group(&dev->dev.kobj, &deepsleep_attribute_group);
-}
-
-static int create_deepsleep(struct platform_device *dev)
-{
- int ret;
-
- ret = sysfs_create_group(&dev->dev.kobj, &deepsleep_attribute_group);
- if (ret)
- remove_deepsleep(dev);
- return ret;
-}
-
/*
* Thermal Profile control
* - Provides thermal profile control through the Platform Profile API
@@ -1169,6 +1136,23 @@ static void remove_thermal_profile(void)
platform_profile_remove();
}
+/*
+ * Platform Driver
+ */
+static const struct attribute_group *alienfx_groups[] = {
+ &hdmi_attribute_group,
+ &lifier_attribute_group,
+ &deepsleep_attribute_group,
+ NULL
+};
+
+static struct platform_driver platform_driver = {
+ .driver = {
+ .name = "alienware-wmi",
+ .dev_groups = alienfx_groups,
+ },
+};
+
static int __init alienware_wmi_init(void)
{
int ret;
@@ -1208,24 +1192,6 @@ static int __init alienware_wmi_init(void)
if (ret)
goto fail_platform_device2;
- if (quirks->hdmi_mux > 0) {
- ret = create_hdmi(platform_device);
- if (ret)
- goto fail_prep_hdmi;
- }
-
- if (quirks->amplifier > 0) {
- ret = create_amplifier(platform_device);
- if (ret)
- goto fail_prep_amplifier;
- }
-
- if (quirks->deepslp > 0) {
- ret = create_deepsleep(platform_device);
- if (ret)
- goto fail_prep_deepsleep;
- }
-
if (quirks->thermal) {
ret = create_thermal_profile();
if (ret)
@@ -1242,9 +1208,6 @@ static int __init alienware_wmi_init(void)
alienware_zone_exit(platform_device);
remove_thermal_profile();
fail_prep_thermal_profile:
-fail_prep_deepsleep:
-fail_prep_amplifier:
-fail_prep_hdmi:
platform_device_del(platform_device);
fail_platform_device2:
platform_device_put(platform_device);
@@ -1259,7 +1222,6 @@ module_init(alienware_wmi_init);
static void __exit alienware_wmi_exit(void)
{
alienware_zone_exit(platform_device);
- remove_hdmi(platform_device);
remove_thermal_profile();
platform_device_unregister(platform_device);
platform_driver_unregister(&platform_driver);
--
2.47.1
next prev parent reply other threads:[~2024-12-05 0:40 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-05 0:27 [RFC PATCH 00/21] alienware-wmi driver rework Kurt Borja
2024-12-05 0:38 ` [RFC PATCH 01/21] alienware-wmi: Modify parse_rgb() signature Kurt Borja
2024-12-05 0:38 ` [RFC PATCH 02/21] alienware-wmi: Move Lighting Control State Kurt Borja
2024-12-05 0:39 ` [RFC PATCH 03/21] alienware-wmi: Remove unnecessary check at module exit Kurt Borja
2024-12-05 0:39 ` Kurt Borja [this message]
2024-12-05 0:40 ` [RFC PATCH 05/21] alienware-wmi: Refactor rgb-zones sysfs group creation Kurt Borja
2024-12-05 10:17 ` Ilpo Järvinen
2024-12-05 12:48 ` Kurt Borja
2024-12-05 13:18 ` Ilpo Järvinen
2024-12-05 13:34 ` Kurt Borja
2024-12-05 0:40 ` [RFC PATCH 06/21] alienware-wmi: Add state container and alienfx_probe() Kurt Borja
2024-12-05 0:40 ` [RFC PATCH 07/21] alienware-wmi: Migrate to state container pattern Kurt Borja
2024-12-05 0:41 ` [RFC PATCH 08/21] alienware-wmi: Add WMI Drivers Kurt Borja
2024-12-05 0:41 ` [RFC PATCH 09/21] alienware-wmi: Initialize WMI drivers Kurt Borja
2024-12-05 0:42 ` [RFC PATCH 10/21] alienware-wmi: Add alienfx OPs to platdata Kurt Borja
2024-12-05 11:05 ` Ilpo Järvinen
2024-12-05 12:50 ` Kurt Borja
2024-12-05 0:43 ` [RFC PATCH 11/21] alienware-wmi: Refactor LED control methods Kurt Borja
2024-12-05 0:43 ` [RFC PATCH 12/21] alienware-wmi: Refactor hdmi, amplifier, deepslp Kurt Borja
2024-12-05 0:44 ` [RFC PATCH 13/21] alienware-wmi: Add a state container for AWCC Kurt Borja
2024-12-05 0:44 ` [RFC PATCH 14/21] alienware-wmi: Migrate thermal methods to wmidev Kurt Borja
2024-12-05 0:44 ` [RFC PATCH 15/21] alienware-wmi: Refactor sysfs visibility methods Kurt Borja
2024-12-05 0:45 ` [RFC PATCH 16/21] alienware-wmi: Make running control state part of platdata Kurt Borja
2024-12-05 11:32 ` Ilpo Järvinen
2024-12-05 13:10 ` Kurt Borja
2024-12-05 14:06 ` Ilpo Järvinen
2024-12-07 2:10 ` Kurt Borja
2024-12-05 0:46 ` [RFC PATCH 17/21] alienware-wmi: Drop thermal methods dependency on quirks Kurt Borja
2024-12-05 11:14 ` Ilpo Järvinen
2024-12-05 12:56 ` Kurt Borja
2024-12-05 0:46 ` [RFC PATCH 18/21] platform-x86: Add header file for alienware-wmi Kurt Borja
2024-12-05 0:47 ` [RFC PATCH 19/21] platform-x86: Rename alienare-wmi Kurt Borja
2024-12-05 11:16 ` Ilpo Järvinen
2024-12-05 12:57 ` Kurt Borja
2024-12-05 0:47 ` [RFC PATCH 20/21] platform-x86: Split the alienware-wmi module Kurt Borja
2024-12-05 0:48 ` [RFC PATCH 21/21] platform-x86: Add config entries to alienware-wmi Kurt Borja
2024-12-06 23:26 ` [RFC PATCH 00/21] alienware-wmi driver rework Armin Wolf
2024-12-07 1:59 ` Kurt Borja
2024-12-07 3:20 ` Armin Wolf
2024-12-07 3:47 ` Kurt Borja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241205003939.2184799-2-kuurtb@gmail.com \
--to=kuurtb@gmail.com \
--cc=Dell.Client.Kernel@dell.com \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=w_armin@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®