From: Frank Li <Frank.Li@nxp.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joy Zou <joy.zou@nxp.com>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, Frank Li <Frank.Li@nxp.com>
Subject: [PATCH 1/2] regulator: dt-bindings: pf9453: add new PMIC PF9453 support
Date: Fri, 06 Dec 2024 15:32:40 -0500 [thread overview]
Message-ID: <20241206-pf9453-v1-1-1e4685114271@nxp.com> (raw)
In-Reply-To: <20241206-pf9453-v1-0-1e4685114271@nxp.com>
From: Joy Zou <joy.zou@nxp.com>
Support new bindings PMIC PF9453, which is totally difference with existed
PCA9450, so create new file for it.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
.../bindings/regulator/nxp,pf9453-regulator.yaml | 158 +++++++++++++++++++++
1 file changed, 158 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf9453-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf9453-regulator.yaml
new file mode 100644
index 0000000000000..07e9c3d3efdff
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/nxp,pf9453-regulator.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/nxp,pf9453-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PF9453 Power Management Integrated Circuit regulators
+
+maintainers:
+ - Joy Zou <joy.zou@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - nxp,pf9453
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ regulators:
+ type: object
+ description: list of regulators provided by this controller
+
+ patternProperties:
+ "^LDO(1|2|_SNVS)$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single LDO regulator.
+ unevaluatedProperties: false
+
+ "^BUCK[1-4]$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+ unevaluatedProperties: false
+
+ properties:
+ nxp,dvs-run-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 600000
+ maximum: 2187500
+ description:
+ PMIC default "RUN" state voltage in uV. Only Buck2 have such
+ dvs(dynamic voltage scaling) property.
+
+ nxp,dvs-standby-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 600000
+ maximum: 2187500
+ description:
+ PMIC default "STANDBY" state voltage in uV. Only Buck2 have such
+ dvs(dynamic voltage scaling) property.
+
+ additionalProperties: false
+
+ sd-vsel-gpios:
+ description:
+ GPIO that is used to switch LDO5 between being configured by LDO5CTRL_L
+ or LDO5CTRL_H register. Use this if the SD_VSEL signal is connected to
+ a host GPIO.
+
+ nxp,i2c-lt-enable:
+ type: boolean
+ description:
+ Indicates that the I2C Level Translator is used.
+
+ nxp,wdog_b-warm-reset:
+ type: boolean
+ description:
+ When WDOG_B signal is asserted a warm reset will be done instead of cold
+ reset.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic@32 {
+ compatible = "nxp,pf9453";
+ reg = <0x32>;
+ interrupt-parent = <&pcal6524>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3775000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <12500>;
+ };
+
+ BUCK3 {
+ regulator-name = "BUCK3";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3775000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ BUCK4{
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3775000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO2 {
+ regulator-name = "LDO2";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO_SNVS {
+ regulator-name = "LDO_SNVS";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+ };
--
2.34.1
next prev parent reply other threads:[~2024-12-06 20:33 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-06 20:32 [PATCH 0/2] regulator: " Frank Li
2024-12-06 20:32 ` Frank Li [this message]
2024-12-11 16:35 ` [PATCH 1/2] regulator: dt-bindings: pf9453: " Rob Herring
2024-12-06 20:32 ` [PATCH 2/2] regulator: pf9453: add " Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241206-pf9453-v1-1-1e4685114271@nxp.com \
--to=frank.li@nxp.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=joy.zou@nxp.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®