[PATCH V2 net 2/2] qca_spi: Make driver probing reliable

[Stefan Wahren <wahrenst@gmx.net>]

The module parameter qcaspi_pluggable controls if QCA7000 signature
should be checked at driver probe (current default) or not. Unfortunately
this could fail in case the chip is temporary in reset, which isn't under
total control by the Linux host. So disable this check per default
in order to avoid unexpected probe failures.

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 drivers/net/ethernet/qualcomm/qca_spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index d328e770bcbe..38a779f4b866 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -54,7 +54,7 @@ MODULE_PARM_DESC(qcaspi_burst_len, "Number of data bytes per burst. Use 1-5000."

 #define QCASPI_PLUGGABLE_MIN 0
 #define QCASPI_PLUGGABLE_MAX 1
-static int qcaspi_pluggable = QCASPI_PLUGGABLE_MIN;
+static int qcaspi_pluggable = QCASPI_PLUGGABLE_MAX;
 module_param(qcaspi_pluggable, int, 0);
 MODULE_PARM_DESC(qcaspi_pluggable, "Pluggable SPI connection (yes/no).");

--
2.34.1