From: Neil Armstrong <neil.armstrong@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
cros-qcom-dts-watchers@chromium.org,
Felipe Balbi <felipe.balbi@microsoft.com>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v3 2/6] arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: remove disabled ov7251 camera
Date: Wed, 11 Dec 2024 09:03:10 +0100 [thread overview]
Message-ID: <20241211-topic-misc-dt-fixes-v3-2-010ac10529b1@linaro.org> (raw)
In-Reply-To: <20241211-topic-misc-dt-fixes-v3-0-010ac10529b1@linaro.org>
The ov7251node has bindings check errors in the endpoint, and the
camera node was disabled since the beginning. Even when switching the
node to okay, the endpoint description to the csiphy is missing along
with the csiphy parameters.
Drop the ov7251 camera entirely until it's properly described.
This obviously fixes:
sdm845-db845c-navigation-mezzanine.dtso: camera@60: port:endpoint:data-lanes: [0, 1] is too long
from schema $id: http://devicetree.org/schemas/media/i2c/ovti,ov7251.yaml#
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
.../qcom/sdm845-db845c-navigation-mezzanine.dtso | 42 ----------------------
1 file changed, 42 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
index 0a87df806cafc8e726aacc07a772ca478d0ee3df..59970082da45203311146cc5249298f6188bf67a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
@@ -79,45 +79,3 @@ ov8856_ep: endpoint {
};
};
};
-
-&cci_i2c1 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- camera@60 {
- compatible = "ovti,ov7251";
-
- /* I2C address as per ov7251.txt linux documentation */
- reg = <0x60>;
-
- /* CAM3_RST_N */
- enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cam3_default>;
-
- clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
- clock-names = "xclk";
- clock-frequency = <24000000>;
-
- /*
- * The &vreg_s4a_1p8 trace always powered on.
- *
- * The 2.8V vdda-supply regulator is enabled when the
- * vreg_s4a_1p8 trace is pulled high.
- * It too is represented by a fixed regulator.
- *
- * No 1.2V vddd-supply regulator is used.
- */
- vdddo-supply = <&vreg_lvs1a_1p8>;
- vdda-supply = <&cam3_avdd_2v8>;
-
- status = "disabled";
-
- port {
- ov7251_ep: endpoint {
- data-lanes = <0 1>;
-/* remote-endpoint = <&csiphy3_ep>; */
- };
- };
- };
-};
--
2.34.1
next prev parent reply other threads:[~2024-12-11 8:03 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-11 8:03 [PATCH v3 0/6] arm64: dts: qcom: misc DT bindings check fixes Neil Armstrong
2024-12-11 8:03 ` [PATCH v3 1/6] arm64: dts: qcom: qcm6490-shift-otter: remove invalid orientation-switch Neil Armstrong
2024-12-11 8:03 ` Neil Armstrong [this message]
2024-12-12 16:47 ` [PATCH v3 2/6] arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: remove disabled ov7251 camera Konrad Dybcio
2024-12-11 8:03 ` [PATCH v3 3/6] arm64: dts: qcom: sc7180-trogdor-quackingstick: add missing avee-supply Neil Armstrong
2024-12-11 8:03 ` [PATCH v3 4/6] arm64: dts: qcom: sc7180-trogdor-pompom: rename 5v-choke thermal zone Neil Armstrong
2024-12-11 8:03 ` [PATCH v3 5/6] arm64: dts: qcom: sc7180: fix psci power domain node names Neil Armstrong
2024-12-11 8:03 ` [PATCH v3 6/6] arm64: dts: qcom: sm8150-microsoft-surface-duo: fix typos in da7280 properties Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241211-topic-misc-dt-fixes-v3-2-010ac10529b1@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=felipe.balbi@microsoft.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®