From: Yang Chen <yangchen.openbmc@gmail.com>
To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, andrew@codeconstruct.com.au,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
patrick@stwcx.xyz, amithash@meta.com
Cc: Jerry.Lin@quantatw.com, yang.chen@quantatw.com
Subject: [PATCH v1 2/4] ARM: dts: aspeed: minerva: add i/o expanders on each FCB
Date: Thu, 12 Dec 2024 21:32:24 +0800 [thread overview]
Message-ID: <20241212133226.342937-3-yangchen.openbmc@gmail.com> (raw)
In-Reply-To: <20241212133226.342937-1-yangchen.openbmc@gmail.com>
Add four I/O expanders on each i2c of fan control board (FCB), assign the
GPIO line name to each GPIO in use, and specify the interrupt GPIO number
for each FCB's i/o expander.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
---
.../aspeed/aspeed-bmc-facebook-minerva.dts | 456 ++++++++++++++++++
1 file changed, 456 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
index 426e249c3326..9cd225ae96cb 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
@@ -342,6 +342,82 @@ temperature-sensor@4b {
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ gpio@11 {
+ compatible = "nxp,pca9555";
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "P48V_FAN1_PWRGD_R", "P48V_FAN2_PWRGD_R",
+ "P48V_FAN3_PWRGD_R", "P48V_FAN4_PWRGD_R",
+ "FCB_1_P48V_ZONE0_PWRGD_R", "FCB_1_P48V_ZONE1_PWRGD_R",
+ "FCB_1_PWRGD_P3V3_R", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@12 {
+ compatible = "nxp,pca9555";
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "INA238_FAN1_ALERT_N", "INA238_FAN2_ALERT_N",
+ "INA238_FAN3_ALERT_N", "INA238_FAN4_ALERT_N",
+ "FCB_1_TMP75_ALERT_N", "",
+ "", "",
+ "FAN1_PRSNT", "FAN2_PRSNT",
+ "FAN3_PRSNT", "FAN4_PRSNT",
+ "", "",
+ "", "";
+ };
+
+ gpio@13 {
+ compatible = "nxp,pca9555";
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FAN1_IL_TACH_ALERT", "FAN1_OL_TACH_ALERT",
+ "FAN2_IL_TACH_ALERT", "FAN2_OL_TACH_ALERT",
+ "FAN3_IL_TACH_ALERT", "FAN3_OL_TACH_ALERT",
+ "FAN4_IL_TACH_ALERT", "FAN4_IL_TACH_ALERT",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@17 {
+ compatible = "nxp,pca9555";
+ reg = <0x17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FCB_1_P1V0_POWER_FAIL", "FCB_1_P1V8_POWER_FAIL",
+ "FCB_1_P48V_ZONE0_POWER_FAIL", "FAN1_POWER_FAIL",
+ "FAN2_POWER_FAIL", "FAN3_POWER_FAIL",
+ "FAN4_POWER_FAIL", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
};
// FCB 2
imux17: i2c@0 {
@@ -389,6 +465,82 @@ temperature-sensor@4b {
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ gpio@11 {
+ compatible = "nxp,pca9555";
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "P48V_FAN5_PWRGD_R", "P48V_FAN6_PWRGD_R",
+ "P48V_FAN7_PWRGD_R", "P48V_FAN8_PWRGD_R",
+ "FCB_2_P48V_ZONE0_PWRGD_R", "FCB_2_P48V_ZONE1_PWRGD_R",
+ "FCB_2_PWRGD_P3V3_R", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@12 {
+ compatible = "nxp,pca9555";
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "INA238_FAN5_ALERT_N", "INA238_FAN6_ALERT_N",
+ "INA238_FAN7_ALERT_N", "INA238_FAN8_ALERT_N",
+ "FCB_2_TMP75_ALERT_N", "",
+ "", "",
+ "FAN5_PRSNT", "FAN6_PRSNT",
+ "FAN7_PRSNT", "FAN8_PRSNT",
+ "", "",
+ "", "";
+ };
+
+ gpio@13 {
+ compatible = "nxp,pca9555";
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FAN5_IL_TACH_ALERT", "FAN5_OL_TACH_ALERT",
+ "FAN6_IL_TACH_ALERT", "FAN6_OL_TACH_ALERT",
+ "FAN7_IL_TACH_ALERT", "FAN7_OL_TACH_ALERT",
+ "FAN8_IL_TACH_ALERT", "FAN8_IL_TACH_ALERT",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@17 {
+ compatible = "nxp,pca9555";
+ reg = <0x17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FCB_2_P1V0_POWER_FAIL", "FCB_2_P1V8_POWER_FAIL",
+ "FCB_2_P48V_ZONE0_POWER_FAIL", "FAN5_POWER_FAIL",
+ "FAN6_POWER_FAIL", "FAN7_POWER_FAIL",
+ "FAN8_POWER_FAIL", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
};
// FCB 3
imux18: i2c@3 {
@@ -436,6 +588,82 @@ temperature-sensor@4b {
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ gpio@11 {
+ compatible = "nxp,pca9555";
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "P48V_FAN9_PWRGD_R", "P48V_FAN10_PWRGD_R",
+ "P48V_FAN11_PWRGD_R", "P48V_FAN12_PWRGD_R",
+ "FCB_3_P48V_ZONE0_PWRGD_R", "FCB_3_P48V_ZONE1_PWRGD_R",
+ "FCB_3_PWRGD_P3V3_R", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@12 {
+ compatible = "nxp,pca9555";
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "INA238_FAN9_ALERT_N", "INA238_FAN10_ALERT_N",
+ "INA238_FAN11_ALERT_N", "INA238_FAN12_ALERT_N",
+ "FCB_3_TMP75_ALERT_N", "",
+ "", "",
+ "FAN9_PRSNT", "FAN10_PRSNT",
+ "FAN11_PRSNT", "FAN12_PRSNT",
+ "", "",
+ "", "";
+ };
+
+ gpio@13 {
+ compatible = "nxp,pca9555";
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FAN9_IL_TACH_ALERT", "FAN9_OL_TACH_ALERT",
+ "FAN10_IL_TACH_ALERT", "FAN10_OL_TACH_ALERT",
+ "FAN11_IL_TACH_ALERT", "FAN11_OL_TACH_ALERT",
+ "FAN12_IL_TACH_ALERT", "FAN12_IL_TACH_ALERT",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@17 {
+ compatible = "nxp,pca9555";
+ reg = <0x17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FCB_3_P1V0_POWER_FAIL", "FCB_3_P1V8_POWER_FAIL",
+ "FCB_3_P48V_ZONE0_POWER_FAIL", "FAN9_POWER_FAIL",
+ "FAN10_POWER_FAIL", "FAN11_POWER_FAIL",
+ "FAN12_POWER_FAIL", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
};
// FCB 4
imux19: i2c@2 {
@@ -483,6 +711,82 @@ temperature-sensor@4b {
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ gpio@11 {
+ compatible = "nxp,pca9555";
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "P48V_FAN13_PWRGD_R", "P48V_FAN14_PWRGD_R",
+ "P48V_FAN15_PWRGD_R", "P48V_FAN16_PWRGD_R",
+ "FCB_4_P48V_ZONE0_PWRGD_R", "FCB_4_P48V_ZONE1_PWRGD_R",
+ "FCB_4_PWRGD_P3V3_R", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@12 {
+ compatible = "nxp,pca9555";
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "INA238_FAN13_ALERT_N", "INA238_FAN14_ALERT_N",
+ "INA238_FAN15_ALERT_N", "INA238_FAN16_ALERT_N",
+ "FCB_4_TMP75_ALERT_N", "",
+ "", "",
+ "FAN13_PRSNT", "FAN14_PRSNT",
+ "FAN15_PRSNT", "FAN16_PRSNT",
+ "", "",
+ "", "";
+ };
+
+ gpio@13 {
+ compatible = "nxp,pca9555";
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FAN13_IL_TACH_ALERT", "FAN13_OL_TACH_ALERT",
+ "FAN14_IL_TACH_ALERT", "FAN14_OL_TACH_ALERT",
+ "FAN15_IL_TACH_ALERT", "FAN15_OL_TACH_ALERT",
+ "FAN16_IL_TACH_ALERT", "FAN16_IL_TACH_ALERT",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@17 {
+ compatible = "nxp,pca9555";
+ reg = <0x17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FCB_4_P1V0_POWER_FAIL", "FCB_4_P1V8_POWER_FAIL",
+ "FCB_4_P48V_ZONE0_POWER_FAIL", "FAN13_POWER_FAIL",
+ "FAN14_POWER_FAIL", "FAN15_POWER_FAIL",
+ "FAN16_POWER_FAIL", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
};
// FCB 5
imux20: i2c@4 {
@@ -529,6 +833,82 @@ temperature-sensor@4b {
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ gpio@11 {
+ compatible = "nxp,pca9555";
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "P48V_FAN20_PWRGD_R", "P48V_FAN19_PWRGD_R",
+ "P48V_FAN18_PWRGD_R", "P48V_FAN17_PWRGD_R",
+ "FCB_5_P48V_ZONE0_PWRGD_R", "FCB_5_P48V_ZONE1_PWRGD_R",
+ "FCB_5_PWRGD_P3V3_R", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@12 {
+ compatible = "nxp,pca9555";
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "INA238_FAN20_ALERT_N", "INA238_FAN19_ALERT_N",
+ "INA238_FAN18_ALERT_N", "INA238_FAN17_ALERT_N",
+ "FCB_5_TMP75_ALERT_N", "",
+ "", "",
+ "FAN20_PRSNT", "FAN19_PRSNT",
+ "FAN18_PRSNT", "FAN17_PRSNT",
+ "", "",
+ "", "";
+ };
+
+ gpio@13 {
+ compatible = "nxp,pca9555";
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FAN20_IL_TACH_ALERT", "FAN20_OL_TACH_ALERT",
+ "FAN19_IL_TACH_ALERT", "FAN19_OL_TACH_ALERT",
+ "FAN18_IL_TACH_ALERT", "FAN18_OL_TACH_ALERT",
+ "FAN17_IL_TACH_ALERT", "FAN17_OL_TACH_ALERT",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@17 {
+ compatible = "nxp,pca9555";
+ reg = <0x17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FCB_5_P1V0_POWER_FAIL", "FCB_5_P1V8_POWER_FAIL",
+ "FCB_5_P48V_ZONE0_POWER_FAIL", "FAN20_POWER_FAIL",
+ "FAN19_POWER_FAIL", "FAN18_POWER_FAIL",
+ "FAN17_POWER_FAIL", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
};
// FCB 6
imux21: i2c@5 {
@@ -575,6 +955,82 @@ temperature-sensor@4b {
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ gpio@11 {
+ compatible = "nxp,pca9555";
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "P48V_FAN24_PWRGD_R", "P48V_FAN23_PWRGD_R",
+ "P48V_FAN22_PWRGD_R", "P48V_FAN21_PWRGD_R",
+ "FCB_6_P48V_ZONE0_PWRGD_R", "FCB_6_P48V_ZONE1_PWRGD_R",
+ "FCB_6_PWRGD_P3V3_R", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@12 {
+ compatible = "nxp,pca9555";
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "INA238_FAN24_ALERT_N", "INA238_FAN23_ALERT_N",
+ "INA238_FAN22_ALERT_N", "INA238_FAN21_ALERT_N",
+ "FCB_6_TMP75_ALERT_N", "",
+ "", "",
+ "FAN24_PRSNT", "FAN23_PRSNT",
+ "FAN22_PRSNT", "FAN21_PRSNT",
+ "", "",
+ "", "";
+ };
+
+ gpio@13 {
+ compatible = "nxp,pca9555";
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FAN24_IL_TACH_ALERT", "FAN24_OL_TACH_ALERT",
+ "FAN23_IL_TACH_ALERT", "FAN23_OL_TACH_ALERT",
+ "FAN22_IL_TACH_ALERT", "FAN22_OL_TACH_ALERT",
+ "FAN21_IL_TACH_ALERT", "FAN21_OL_TACH_ALERT",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@17 {
+ compatible = "nxp,pca9555";
+ reg = <0x17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FCB_6_P1V0_POWER_FAIL", "FCB_6_P1V8_POWER_FAIL",
+ "FCB_6_P48V_ZONE0_POWER_FAIL", "FAN24_POWER_FAIL",
+ "FAN23_POWER_FAIL", "FAN22_POWER_FAIL",
+ "FAN21_POWER_FAIL", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
};
imux22: i2c@6 {
--
2.34.1
next prev parent reply other threads:[~2024-12-12 13:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-12 13:32 [PATCH v1 0/4] Revise Meta (Facebook) Minerva BMC Yang Chen
2024-12-12 13:32 ` [PATCH v1 1/4] ARM: dts: aspeed: minerva: add i/o expanders on bus 0 Yang Chen
2024-12-12 13:32 ` Yang Chen [this message]
2024-12-12 13:32 ` [PATCH v1 3/4] ARM: dts: aspeed: minerva: add bmc ready led setting Yang Chen
2024-12-12 13:32 ` [PATCH v1 4/4] ARM: dts: aspeed: minerva: add second source RTC Yang Chen
2024-12-13 5:28 ` [PATCH v1 0/4] Revise Meta (Facebook) Minerva BMC Andrew Jeffery
2024-12-13 11:13 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241212133226.342937-3-yangchen.openbmc@gmail.com \
--to=yangchen.openbmc@gmail.com \
--cc=Jerry.Lin@quantatw.com \
--cc=amithash@meta.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patrick@stwcx.xyz \
--cc=robh+dt@kernel.org \
--cc=yang.chen@quantatw.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®