From: "André Apitzsch via B4 Relay" <devnull+git.apitzsch.eu@kernel.org>
To: Ricardo Ribalda <ribalda@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, linux-media@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Dave Stevenson" <dave.stevenson@raspberrypi.com>,
"Vincent Knecht" <vincent.knecht@mailoo.org>,
"André Apitzsch" <git@apitzsch.eu>,
"Ricardo Ribalda" <ribalda@chromium.org>
Subject: [PATCH v4 08/13] media: i2c: imx214: Implement vflip/hflip controls
Date: Mon, 16 Dec 2024 22:00:54 +0100 [thread overview]
Message-ID: <20241216-imx214-v4-8-8cbda160fbce@apitzsch.eu> (raw)
In-Reply-To: <20241216-imx214-v4-0-8cbda160fbce@apitzsch.eu>
From: André Apitzsch <git@apitzsch.eu>
The imx214 sensor supports horizontal and vertical flipping. Add
appropriate controls to the driver.
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
---
drivers/media/i2c/imx214.c | 69 ++++++++++++++++++++++++++++++++++++++++------
1 file changed, 61 insertions(+), 8 deletions(-)
diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
index 804814f3e5886369090c6ac36c57fa07cde6d5ac..880b4bc506d898181965737f3f8262fadf70a5fe 100644
--- a/drivers/media/i2c/imx214.c
+++ b/drivers/media/i2c/imx214.c
@@ -30,7 +30,6 @@
#define IMX214_DEFAULT_LINK_FREQ 480000000
#define IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10)
#define IMX214_FPS 30
-#define IMX214_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10
/* V-TIMING internal */
#define IMX214_REG_FRM_LENGTH_LINES CCI_REG16(0x0340)
@@ -182,6 +181,22 @@ static const char * const imx214_supply_name[] = {
#define IMX214_NUM_SUPPLIES ARRAY_SIZE(imx214_supply_name)
+/*
+ * The supported formats.
+ * This table MUST contain 4 entries per format, to cover the various flip
+ * combinations in the order
+ * - no flip
+ * - h flip
+ * - v flip
+ * - h&v flips
+ */
+static const u32 imx214_mbus_formats[] = {
+ MEDIA_BUS_FMT_SRGGB10_1X10,
+ MEDIA_BUS_FMT_SGRBG10_1X10,
+ MEDIA_BUS_FMT_SGBRG10_1X10,
+ MEDIA_BUS_FMT_SBGGR10_1X10,
+};
+
struct imx214 {
struct device *dev;
struct clk *xclk;
@@ -197,6 +212,10 @@ struct imx214 {
struct v4l2_ctrl *hblank;
struct v4l2_ctrl *exposure;
struct v4l2_ctrl *unit_size;
+ struct {
+ struct v4l2_ctrl *hflip;
+ struct v4l2_ctrl *vflip;
+ };
const struct imx214_mode *cur_mode;
@@ -360,7 +379,6 @@ static const struct cci_reg_sequence mode_table_common[] = {
/* global setting */
/* basic config */
- { IMX214_REG_ORIENTATION, 0 },
{ IMX214_REG_MASK_CORR_FRAMES, IMX214_CORR_FRAMES_MASK },
{ IMX214_REG_FAST_STANDBY_CTRL, 1 },
{ IMX214_REG_LINE_LENGTH_PCK, IMX214_PPL_DEFAULT },
@@ -539,11 +557,21 @@ static int __maybe_unused imx214_power_off(struct device *dev)
return 0;
}
+/* Get bayer order based on flip setting. */
+static u32 imx214_get_format_code(struct imx214 *imx214)
+{
+ unsigned int i;
+
+ i = (imx214->vflip->val ? 2 : 0) | (imx214->hflip->val ? 1 : 0);
+
+ return imx214_mbus_formats[i];
+}
+
static void imx214_update_pad_format(struct imx214 *imx214,
const struct imx214_mode *mode,
struct v4l2_mbus_framefmt *fmt, u32 code)
{
- fmt->code = IMX214_MBUS_CODE;
+ fmt->code = imx214_get_format_code(imx214);
fmt->width = mode->width;
fmt->height = mode->height;
fmt->field = V4L2_FIELD_NONE;
@@ -559,10 +587,12 @@ static int imx214_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
- if (code->index > 0)
+ struct imx214 *imx214 = to_imx214(sd);
+
+ if (code->index >= (ARRAY_SIZE(imx214_mbus_formats) / 4))
return -EINVAL;
- code->code = IMX214_MBUS_CODE;
+ code->code = imx214_get_format_code(imx214);
return 0;
}
@@ -571,7 +601,11 @@ static int imx214_enum_frame_size(struct v4l2_subdev *subdev,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_size_enum *fse)
{
- if (fse->code != IMX214_MBUS_CODE)
+ struct imx214 *imx214 = to_imx214(subdev);
+ u32 code;
+
+ code = imx214_get_format_code(imx214);
+ if (fse->code != code)
return -EINVAL;
if (fse->index >= ARRAY_SIZE(imx214_modes))
@@ -705,6 +739,7 @@ static int imx214_entity_init_state(struct v4l2_subdev *subdev,
struct v4l2_subdev_format fmt = { };
fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+ fmt.format.code = MEDIA_BUS_FMT_SRGGB10_1X10;
fmt.format.width = imx214_modes[0].width;
fmt.format.height = imx214_modes[0].height;
@@ -748,6 +783,11 @@ static int imx214_set_ctrl(struct v4l2_ctrl *ctrl)
case V4L2_CID_EXPOSURE:
cci_write(imx214->regmap, IMX214_REG_EXPOSURE, ctrl->val, &ret);
break;
+ case V4L2_CID_HFLIP:
+ case V4L2_CID_VFLIP:
+ cci_write(imx214->regmap, IMX214_REG_ORIENTATION,
+ imx214->hflip->val | imx214->vflip->val << 1, &ret);
+ break;
case V4L2_CID_VBLANK:
cci_write(imx214->regmap, IMX214_REG_FRM_LENGTH_LINES,
format->height + ctrl->val, &ret);
@@ -786,7 +826,7 @@ static int imx214_ctrls_init(struct imx214 *imx214)
return ret;
ctrl_hdlr = &imx214->ctrls;
- ret = v4l2_ctrl_handler_init(&imx214->ctrls, 8);
+ ret = v4l2_ctrl_handler_init(&imx214->ctrls, 10);
if (ret)
return ret;
@@ -835,6 +875,18 @@ static int imx214_ctrls_init(struct imx214 *imx214)
IMX214_EXPOSURE_STEP,
exposure_def);
+ imx214->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx214_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ if (imx214->hflip)
+ imx214->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
+
+ imx214->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx214_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ if (imx214->vflip)
+ imx214->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
+
+ v4l2_ctrl_cluster(2, &imx214->hflip);
+
imx214->unit_size = v4l2_ctrl_new_std_compound(ctrl_hdlr,
NULL,
V4L2_CID_UNIT_CELL_SIZE,
@@ -966,6 +1018,7 @@ static int imx214_enum_frame_interval(struct v4l2_subdev *subdev,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_interval_enum *fie)
{
+ struct imx214 *imx214 = to_imx214(subdev);
const struct imx214_mode *mode;
dev_warn_once(imx214->dev, "frame_interval functions return an unreliable value for compatibility reasons. Use the VBLANK and HBLANK controls to determine the correct frame rate.\n");
@@ -977,7 +1030,7 @@ static int imx214_enum_frame_interval(struct v4l2_subdev *subdev,
ARRAY_SIZE(imx214_modes), width, height,
fie->width, fie->height);
- fie->code = IMX214_MBUS_CODE;
+ fie->code = imx214_get_format_code(imx214);
fie->width = mode->width;
fie->height = mode->height;
fie->interval.numerator = 1;
--
2.47.1
next prev parent reply other threads:[~2024-12-16 21:01 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-16 21:00 [PATCH v4 00/13] media: i2c: imx214: Miscellaneous cleanups and improvements André Apitzsch via B4 Relay
2024-12-16 21:00 ` [PATCH v4 01/13] media: i2c: imx214: Use subdev active state André Apitzsch via B4 Relay
2024-12-16 21:20 ` Ricardo Ribalda Delgado
2024-12-17 9:55 ` Sakari Ailus
2024-12-16 21:00 ` [PATCH v4 02/13] media: i2c: imx214: Simplify with dev_err_probe() André Apitzsch via B4 Relay
2024-12-16 21:00 ` [PATCH v4 03/13] media: i2c: imx214: Convert to CCI register access helpers André Apitzsch via B4 Relay
2024-12-16 21:00 ` [PATCH v4 04/13] media: i2c: imx214: Replace register addresses with macros André Apitzsch via B4 Relay
2024-12-16 21:00 ` [PATCH v4 05/13] media: i2c: imx214: Drop IMX214_REG_EXPOSURE from mode reg arrays André Apitzsch via B4 Relay
2024-12-16 21:00 ` [PATCH v4 06/13] media: i2c: imx214: Check number of lanes from device tree André Apitzsch via B4 Relay
2024-12-16 21:00 ` [PATCH v4 07/13] media: i2c: imx214: Add vblank and hblank controls André Apitzsch via B4 Relay
2024-12-16 21:00 ` André Apitzsch via B4 Relay [this message]
2024-12-16 21:00 ` [PATCH v4 09/13] media: i2c: imx214: Add analogue/digital gain control André Apitzsch via B4 Relay
2024-12-16 21:00 ` [PATCH v4 10/13] media: i2c: imx214: Verify chip ID André Apitzsch via B4 Relay
2024-12-16 21:00 ` [PATCH v4 11/13] media: i2c: imx214: Add test pattern control André Apitzsch via B4 Relay
2024-12-16 21:00 ` [PATCH v4 12/13] media: i2c: imx214: Fix clock handling on probe error or remove André Apitzsch via B4 Relay
2024-12-16 21:00 ` [PATCH v4 13/13] media: i2c: imx214: Fix link frequency validation André Apitzsch via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241216-imx214-v4-8-8cbda160fbce@apitzsch.eu \
--to=devnull+git.apitzsch.eu@kernel.org \
--cc=dave.stevenson@raspberrypi.com \
--cc=git@apitzsch.eu \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=ribalda@chromium.org \
--cc=ribalda@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=vincent.knecht@mailoo.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®