From: "Jackson.lee" <jackson.lee@chipsnmedia.com>
To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
sebastian.fricke@collabora.com, nicolas.dufresne@collabora.com,
bob.beckett@collabora.com, dafna.hirschfeld@collabora.com
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
jackson.lee@chipsnmedia.com, lafley.kim@chipsnmedia.com,
b-brnich@ti.com, hverkuil@xs4all.nl, nas.chung@chipsnmedia.com
Subject: [PATCH v2 0/4] Fix critical bugs
Date: Tue, 17 Dec 2024 13:51:21 +0900 [thread overview]
Message-ID: <20241217045125.58-1-jackson.lee@chipsnmedia.com> (raw)
iThe wave5 codec driver is a stateful encoder/decoder.
The following patches is for improving decoder performance and fix critical bugs
v4l2-compliance results:
========================
v4l2-compliance 1.26.1-5142, 64 bits, 64-bit time_t
Buffer ioctls:
warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not supported
warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not supported
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test CREATE_BUFS maximum buffers: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Total for wave5-dec device /dev/video0: 46, Succeeded: 46, Failed: 0, Warnings: 2
Total for wave5-enc device /dev/video1: 46, Succeeded: 46, Failed: 0, Warnings: 0
Fluster test results:
=====================
Running test suite JCT-VC-HEVC_V1 with decoder GStreamer-H.265-V4L2-Gst1.0 Using 1 parallel job(s)
Ran 132/147 tests successfully in 68.608 secs
(1 test fails because of not supporting to parse multi frames, 1 test fails because of a missing frame and slight corruption,
2 tests fail because of sizes which are incompatible with the IP, 11 tests fail because of unsupported 10 bit format)
Running test suite JVT-AVC_V1 with decoder GStreamer-H.264-V4L2-Gst1.0 Using 1 parallel job(s)
Ran 78/135 tests successfully in 33.238 secs
(57 fail because the hardware is unable to decode MBAFF / FMO / Field / Extended profile streams.)
Change since v1:
=================
* For [PATCH v2 1/4] media: chips-media: wave5: Fix to display gray color
- Add Reviewed-by tag
* For [PATCH v2 2/4] media: chips-media: wave5: Avoid race condition for
interrupt handling
- Add Reviewed-by tag
* For [PATCH v2 3/4] media: chips-media: wave5: Fix hang after seeking
- Add Reviewed-by tag
* For [PATCH v2 4/4] media: chips-media: wave5: Fix timeout while testing
- Add Reviewed-by tag
* Drop "media: chips-media: wave5: Improve performance of decoder"
- We will try to send this patch separately next time
Change since v0:
=================
* For [PATCH v1 3/5] media: chips-media: wave5: Improve performance of
decoder
- Fix Null reference while testing fluster for more than 2
decoders
- Fix timeout while testing fluster for multi instances
Jackson.lee (4):
media: chips-media: wave5: Fix to display gray color on screen
media: chips-media: wave5: Avoid race condition for interrupt handling
media: chips-media: wave5: Fix hang after seeking
media: chips-media: wave5: Fix timeout while testing 10bit hevc
fluster
.../platform/chips-media/wave5/wave5-hw.c | 2 +-
.../chips-media/wave5/wave5-vpu-dec.c | 31 ++++++++++++++++++-
.../platform/chips-media/wave5/wave5-vpu.c | 4 +--
.../platform/chips-media/wave5/wave5-vpuapi.c | 10 ++++++
4 files changed, 43 insertions(+), 4 deletions(-)
--
2.43.0
next reply other threads:[~2024-12-17 4:51 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-17 4:51 Jackson.lee [this message]
2024-12-17 4:51 ` [PATCH v2 1/4] media: chips-media: wave5: Fix to display gray color on screen Jackson.lee
2024-12-17 14:03 ` Nicolas Dufresne
2024-12-18 2:58 ` jackson.lee
2024-12-17 4:51 ` [PATCH v2 2/4] media: chips-media: wave5: Avoid race condition for interrupt handling Jackson.lee
2024-12-17 14:04 ` Nicolas Dufresne
2024-12-18 3:02 ` jackson.lee
2024-12-17 4:51 ` [PATCH v2 3/4] media: chips-media: wave5: Fix hang after seeking Jackson.lee
2024-12-17 14:05 ` Nicolas Dufresne
2024-12-18 3:06 ` jackson.lee
2024-12-17 4:51 ` [PATCH v2 4/4] media: chips-media: wave5: Fix timeout while testing 10bit hevc fluster Jackson.lee
2025-01-07 1:39 ` [PATCH v2 0/4] Fix critical bugs jackson.lee
2025-02-03 0:54 ` jackson.lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241217045125.58-1-jackson.lee@chipsnmedia.com \
--to=jackson.lee@chipsnmedia.com \
--cc=b-brnich@ti.com \
--cc=bob.beckett@collabora.com \
--cc=dafna.hirschfeld@collabora.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=hverkuil@xs4all.nl \
--cc=lafley.kim@chipsnmedia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nas.chung@chipsnmedia.com \
--cc=nicolas.dufresne@collabora.com \
--cc=sebastian.fricke@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®