From: Yeoreum Yun <yeoreum.yun@arm.com>
To: suzuki.poulose@arm.com, james.clark@linaro.org,
alexander.shishkin@linux.intel.com, bigeasy@linutronix.de,
clrkwllms@kernel.org, rostedt@goodmis.org, mike.leach@linaro.org
Cc: coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-rt-devel@lists.linux.dev,
Yeoreum Yun <yeoreum.yun@arm.com>
Subject: [PATCH v4 1/9] coresight: change coresight_device lock type to raw_spinlock_t
Date: Fri, 20 Dec 2024 10:45:12 +0000 [thread overview]
Message-ID: <20241220104521.809071-2-yeoreum.yun@arm.com> (raw)
In-Reply-To: <20241220104521.809071-1-yeoreum.yun@arm.com>
coresight_device->cscfg_csdev_lock can be held during __schedule()
by perf_event_task_sched_out()/in().
Since coresight->cscfg_csdev_lock type is spinlock_t and
perf_event_task_sched_out()/in() is called after acquiring rq_lock,
which is raw_spinlock_t (an unsleepable lock),
this poses an issue in PREEMPT_RT kernel where spinlock_t is sleepable.
To address this, change type of coresight_device->cscfg_csdev_lock
from spinlock_t to raw_spinlock_t.
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
---
.../hwtracing/coresight/coresight-syscfg.c | 26 +++++++++----------
include/linux/coresight.h | 2 +-
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c
index 11138a9762b0..a70c1454b410 100644
--- a/drivers/hwtracing/coresight/coresight-syscfg.c
+++ b/drivers/hwtracing/coresight/coresight-syscfg.c
@@ -89,9 +89,9 @@ static int cscfg_add_csdev_cfg(struct coresight_device *csdev,
}
/* if matched features, add config to device.*/
if (config_csdev) {
- spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags);
+ raw_spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags);
list_add(&config_csdev->node, &csdev->config_csdev_list);
- spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags);
+ raw_spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags);
}
return 0;
@@ -194,9 +194,9 @@ static int cscfg_load_feat_csdev(struct coresight_device *csdev,
/* add to internal csdev feature list & initialise using reset call */
cscfg_reset_feat(feat_csdev);
- spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags);
+ raw_spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags);
list_add(&feat_csdev->node, &csdev->feature_csdev_list);
- spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags);
+ raw_spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags);
return 0;
}
@@ -765,7 +765,7 @@ static int cscfg_list_add_csdev(struct coresight_device *csdev,
INIT_LIST_HEAD(&csdev->feature_csdev_list);
INIT_LIST_HEAD(&csdev->config_csdev_list);
- spin_lock_init(&csdev->cscfg_csdev_lock);
+ raw_spin_lock_init(&csdev->cscfg_csdev_lock);
return 0;
}
@@ -855,7 +855,7 @@ void cscfg_csdev_reset_feats(struct coresight_device *csdev)
struct cscfg_feature_csdev *feat_csdev;
unsigned long flags;
- spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags);
+ raw_spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags);
if (list_empty(&csdev->feature_csdev_list))
goto unlock_exit;
@@ -863,7 +863,7 @@ void cscfg_csdev_reset_feats(struct coresight_device *csdev)
cscfg_reset_feat(feat_csdev);
unlock_exit:
- spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags);
+ raw_spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags);
}
EXPORT_SYMBOL_GPL(cscfg_csdev_reset_feats);
@@ -1059,7 +1059,7 @@ int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
* Look for matching configuration - set the active configuration
* context if found.
*/
- spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags);
+ raw_spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags);
list_for_each_entry(config_csdev_item, &csdev->config_csdev_list, node) {
config_desc = config_csdev_item->config_desc;
if ((atomic_read(&config_desc->active_cnt)) &&
@@ -1069,7 +1069,7 @@ int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
break;
}
}
- spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags);
+ raw_spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags);
/*
* If found, attempt to enable
@@ -1090,12 +1090,12 @@ int cscfg_csdev_enable_active_config(struct coresight_device *csdev,
*
* Set enabled if OK, err if not.
*/
- spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags);
+ raw_spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags);
if (csdev->active_cscfg_ctxt)
config_csdev_active->enabled = true;
else
err = -EBUSY;
- spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags);
+ raw_spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags);
}
}
return err;
@@ -1124,7 +1124,7 @@ void cscfg_csdev_disable_active_config(struct coresight_device *csdev)
* If it was not enabled, we have no work to do, otherwise mark as disabled.
* Clear the active config pointer.
*/
- spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags);
+ raw_spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags);
config_csdev = (struct cscfg_config_csdev *)csdev->active_cscfg_ctxt;
if (config_csdev) {
if (!config_csdev->enabled)
@@ -1133,7 +1133,7 @@ void cscfg_csdev_disable_active_config(struct coresight_device *csdev)
config_csdev->enabled = false;
}
csdev->active_cscfg_ctxt = NULL;
- spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags);
+ raw_spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags);
/* true if there was an enabled active config */
if (config_csdev)
diff --git a/include/linux/coresight.h b/include/linux/coresight.h
index c13342594278..924b58c343b3 100644
--- a/include/linux/coresight.h
+++ b/include/linux/coresight.h
@@ -296,7 +296,7 @@ struct coresight_device {
/* system configuration and feature lists */
struct list_head feature_csdev_list;
struct list_head config_csdev_list;
- spinlock_t cscfg_csdev_lock;
+ raw_spinlock_t cscfg_csdev_lock;
void *active_cscfg_ctxt;
};
--
LEVI:{C3F47F37-75D8-414A-A8BA-3980EC8A46D7}
next prev parent reply other threads:[~2024-12-20 10:45 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-20 10:45 [PATCH v4 0/9] coresight: change some driver' spinlock " Yeoreum Yun
2024-12-20 10:45 ` Yeoreum Yun [this message]
2024-12-20 10:45 ` [PATCH v4 1/1] coresight/ultrasoc: change smb_drv_data spinlock's " Yeoreum Yun
2024-12-20 10:46 ` Yeo Reum Yun
2024-12-20 10:45 ` [PATCH v4 2/9] coresight-etm4x: change etmv4_drvdata spinlock " Yeoreum Yun
2024-12-20 10:45 ` [PATCH v4 3/9] coresight: change coresight_trace_id_map's lock " Yeoreum Yun
2024-12-20 10:45 ` [PATCH v4 4/9] coresight-cti: change cti_drvdata spinlock's " Yeoreum Yun
2024-12-20 10:45 ` [PATCH v4 5/9] coresight-etb10: change etb_drvdata " Yeoreum Yun
2024-12-20 10:45 ` [PATCH v4 6/9] coresight-funnel: change funnel_drvdata " Yeoreum Yun
2024-12-20 10:45 ` [PATCH v4 7/9] coresight-replicator: change replicator_drvdata " Yeoreum Yun
2024-12-20 10:45 ` [PATCH v4 8/9] coresight-tmc: change tmc_drvdata " Yeoreum Yun
2024-12-20 10:45 ` [PATCH v4 9/9] coresight/ultrasoc: change smb_drv_data " Yeoreum Yun
2024-12-31 14:44 ` [PATCH v4 0/9] coresight: change some driver' spinlock " Yeo Reum Yun
2025-02-25 10:23 ` Suzuki K Poulose
2025-02-25 13:53 ` Yeo Reum Yun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241220104521.809071-2-yeoreum.yun@arm.com \
--to=yeoreum.yun@arm.com \
--cc=alexander.shishkin@linux.intel.com \
--cc=bigeasy@linutronix.de \
--cc=clrkwllms@kernel.org \
--cc=coresight@lists.linaro.org \
--cc=james.clark@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rt-devel@lists.linux.dev \
--cc=mike.leach@linaro.org \
--cc=rostedt@goodmis.org \
--cc=suzuki.poulose@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®