From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: "Leo Yan" <leo.yan@linux.dev>,
"Georgi Djakov" <djakov@kernel.org>,
"Shawn Guo" <shawn.guo@linaro.org>,
"Stephan Gerhold" <stephan@gerhold.net>,
"Zac Crosby" <zac@squareup.com>, "Bastian Köcher" <git@kchr.de>,
"Jeremy McNicoll" <jeremymc@redhat.com>,
"Rohit Agarwal" <quic_rohiagar@quicinc.com>,
"Melody Olvera" <quic_molvera@quicinc.com>,
cros-qcom-dts-watchers@chromium.org,
"Stephen Boyd" <swboyd@chromium.org>,
"Rajendra Nayak" <quic_rjendra@quicinc.com>,
"Martin Botka" <martin.botka@somainline.org>,
"Jonathan Marek" <jonathan@marek.ca>,
"Vinod Koul" <vkoul@kernel.org>,
"Tengfei Fan" <quic_tengfan@quicinc.com>,
"Fenglin Wu" <quic_fenglinw@quicinc.com>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Abel Vesa" <abel.vesa@linaro.org>,
"Alexandru Marc Serdeliuc" <serdeliuk@yahoo.com>,
"Vladimir Zapolskiy" <vladimir.zapolskiy@linaro.org>,
"Sibi Sankar" <quic_sibis@quicinc.com>,
"Bryan O'Donoghue" <bryan.odonoghue@linaro.org>,
"Jun Nie" <jun.nie@linaro.org>, "Max Chen" <mchen@squareup.com>,
"Vincent Knecht" <vincent.knecht@mailoo.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 00/21] arm64: dts: qcom: correct sleep clocks
Date: Tue, 24 Dec 2024 12:16:59 +0200 [thread overview]
Message-ID: <20241224-fix-board-clocks-v3-0-e9b08fbeadd3@linaro.org> (raw)
Correct sleep clock frequencies. For several platforms I wasn't able to
find corresponding document and as such I didn't change defined clocks.
These platforms are: IPQ5018, IPQ5332, IPQ5424, IPQ6018, IPQ8074,
IPQ9574, MSM8953.
Also several MSM8996 / MSM8994 devices define divisor clocks at
32.768 kHz. Most likely these clocks are also generated by dividing the
19.2 MHz clock and should have the frequency 32.764 kHz, but being not
100% sure I decided to leave those as is for now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Changes in v3:
- Dropped the patches NAK-ed by Krzysztof
- Link to v2: https://lore.kernel.org/r/20241130-fix-board-clocks-v2-0-b9a35858657e@linaro.org
Changes in v2:
- Move clocks to SoC DTSI (offline discussion with Bjorn)
- Link to v1: https://lore.kernel.org/r/20241115-fix-board-clocks-v1-0-8cb00a4f57c2@linaro.org
---
Dmitry Baryshkov (21):
arm64: dts: qcom: msm8916: correct sleep clock frequency
arm64: dts: qcom: msm8939: correct sleep clock frequency
arm64: dts: qcom: msm8994: correct sleep clock frequency
arm64: dts: qcom: qcs404: correct sleep clock frequency
arm64: dts: qcom: q[dr]u1000: correct sleep clock frequency
arm64: dts: qcom: qrb4210-rb2: correct sleep clock frequency
arm64: dts: qcom: sar2130p: correct sleep clock frequency
arm64: dts: qcom: sc7280: correct sleep clock frequency
arm64: dts: qcom: sdx75: correct sleep clock frequency
arm64: dts: qcom: sm4450: correct sleep clock frequency
arm64: dts: qcom: sm6125: correct sleep clock frequency
arm64: dts: qcom: sm6375: correct sleep clock frequency
arm64: dts: qcom: sm8250: correct sleep clock frequency
arm64: dts: qcom: sm8350: correct sleep clock frequency
arm64: dts: qcom: sm8450: correct sleep clock frequency
arm64: dts: qcom: sm8550: correct sleep clock frequency
arm64: dts: qcom: sm8650: correct sleep clock frequency
arm64: dts: qcom: x1e80100: correct sleep clock frequency
arm64: dts: qcom: sc8180x: drop extra XO clock frequencies
arm64: dts: qcom: sdm670: move board clocks to sdm670.dtsi file
arm64: dts: qcom: q[dr]u1000: move board clocks to qdu1000.dtsi file
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8939.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8994.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs404.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 14 --------------
arch/arm64/boot/dts/qcom/qdu1000.dtsi | 14 ++++++++++++++
arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 2 +-
arch/arm64/boot/dts/qcom/qru1000-idp.dts | 14 --------------
arch/arm64/boot/dts/qcom/sar2130p.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 4 ----
arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 4 ----
arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts | 14 --------------
arch/arm64/boot/dts/qcom/sdm670.dtsi | 14 ++++++++++++++
arch/arm64/boot/dts/qcom/sdx75.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm4450.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm6125.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm6375.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8450.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8550-hdk.dts | 2 +-
arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 2 +-
arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 2 +-
arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts | 2 +-
.../arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts | 2 +-
arch/arm64/boot/dts/qcom/sm8650-hdk.dts | 2 +-
arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 2 +-
arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 2 +-
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 2 +-
31 files changed, 52 insertions(+), 74 deletions(-)
---
base-commit: 8155b4ef3466f0e289e8fcc9e6e62f3f4dceeac2
change-id: 20241115-fix-board-clocks-e3afe520627c
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
next reply other threads:[~2024-12-24 10:17 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-24 10:16 Dmitry Baryshkov [this message]
2024-12-24 10:17 ` [PATCH v3 01/21] arm64: dts: qcom: msm8916: correct sleep clock frequency Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 02/21] arm64: dts: qcom: msm8939: " Dmitry Baryshkov
2024-12-30 9:49 ` Bryan O'Donoghue
2024-12-30 14:10 ` Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 03/21] arm64: dts: qcom: msm8994: " Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 04/21] arm64: dts: qcom: qcs404: " Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 05/21] arm64: dts: qcom: q[dr]u1000: " Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 06/21] arm64: dts: qcom: qrb4210-rb2: " Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 07/21] arm64: dts: qcom: sar2130p: " Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 08/21] arm64: dts: qcom: sc7280: " Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 09/21] arm64: dts: qcom: sdx75: " Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 10/21] arm64: dts: qcom: sm4450: " Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 11/21] arm64: dts: qcom: sm6125: " Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 12/21] arm64: dts: qcom: sm6375: " Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 13/21] arm64: dts: qcom: sm8250: " Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 14/21] arm64: dts: qcom: sm8350: " Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 15/21] arm64: dts: qcom: sm8450: " Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 16/21] arm64: dts: qcom: sm8550: " Dmitry Baryshkov
2024-12-30 9:42 ` Neil Armstrong
2024-12-24 10:17 ` [PATCH v3 17/21] arm64: dts: qcom: sm8650: " Dmitry Baryshkov
2024-12-30 9:42 ` Neil Armstrong
2024-12-24 10:17 ` [PATCH v3 18/21] arm64: dts: qcom: x1e80100: " Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 19/21] arm64: dts: qcom: sc8180x: drop extra XO clock frequencies Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 20/21] arm64: dts: qcom: sdm670: move board clocks to sdm670.dtsi file Dmitry Baryshkov
2024-12-24 10:17 ` [PATCH v3 21/21] arm64: dts: qcom: q[dr]u1000: move board clocks to qdu1000.dtsi file Dmitry Baryshkov
2024-12-27 4:15 ` [PATCH v3 00/21] arm64: dts: qcom: correct sleep clocks Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241224-fix-board-clocks-v3-0-e9b08fbeadd3@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=abel.vesa@linaro.org \
--cc=andersson@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=djakov@kernel.org \
--cc=git@kchr.de \
--cc=jeremymc@redhat.com \
--cc=jonathan@marek.ca \
--cc=jun.nie@linaro.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=leo.yan@linux.dev \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.botka@somainline.org \
--cc=mchen@squareup.com \
--cc=neil.armstrong@linaro.org \
--cc=quic_fenglinw@quicinc.com \
--cc=quic_molvera@quicinc.com \
--cc=quic_rjendra@quicinc.com \
--cc=quic_rohiagar@quicinc.com \
--cc=quic_sibis@quicinc.com \
--cc=quic_tengfan@quicinc.com \
--cc=robh@kernel.org \
--cc=serdeliuk@yahoo.com \
--cc=shawn.guo@linaro.org \
--cc=stephan@gerhold.net \
--cc=swboyd@chromium.org \
--cc=vincent.knecht@mailoo.org \
--cc=vkoul@kernel.org \
--cc=vladimir.zapolskiy@linaro.org \
--cc=zac@squareup.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®