From: linux@treblig.org
To: florian.fainelli@broadcom.com,
bcm-kernel-feedback-list@broadcom.com, tglx@linutronix.de
Cc: linux-mips@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
"Dr. David Alan Gilbert" <linux@treblig.org>
Subject: [PATCH] irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack by generic
Date: Tue, 24 Dec 2024 00:17:27 +0000 [thread overview]
Message-ID: <20241224001727.149337-1-linux@treblig.org> (raw)
From: "Dr. David Alan Gilbert" <linux@treblig.org>
Replace brcmstb_l2_mask_and_ack() by the generic
irq_gc_mask_disable_and_ack_set().
brcmstb_l2_mask_and_ack() was added by
commit 49aa6ef0b439 ("irqchip/brcmstb-l2: Remove some processing from the
handler") in September 2017 with a comment saying it was actually
generic and someone should add it to the generic code.
commit 20608924cc2e ("genirq: generic chip: Add
irq_gc_mask_disable_and_ack_set()") did that a few weeks later,
however no one went back and took the original out.
Build tested only.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
---
drivers/irqchip/irq-brcmstb-l2.c | 28 +---------------------------
1 file changed, 1 insertion(+), 27 deletions(-)
diff --git a/drivers/irqchip/irq-brcmstb-l2.c b/drivers/irqchip/irq-brcmstb-l2.c
index c988886917f7..db4c9721fcf2 100644
--- a/drivers/irqchip/irq-brcmstb-l2.c
+++ b/drivers/irqchip/irq-brcmstb-l2.c
@@ -61,32 +61,6 @@ struct brcmstb_l2_intc_data {
u32 saved_mask; /* for suspend/resume */
};
-/**
- * brcmstb_l2_mask_and_ack - Mask and ack pending interrupt
- * @d: irq_data
- *
- * Chip has separate enable/disable registers instead of a single mask
- * register and pending interrupt is acknowledged by setting a bit.
- *
- * Note: This function is generic and could easily be added to the
- * generic irqchip implementation if there ever becomes a will to do so.
- * Perhaps with a name like irq_gc_mask_disable_and_ack_set().
- *
- * e.g.: https://patchwork.kernel.org/patch/9831047/
- */
-static void brcmstb_l2_mask_and_ack(struct irq_data *d)
-{
- struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- struct irq_chip_type *ct = irq_data_get_chip_type(d);
- u32 mask = d->mask;
-
- irq_gc_lock(gc);
- irq_reg_writel(gc, mask, ct->regs.disable);
- *ct->mask_cache &= ~mask;
- irq_reg_writel(gc, mask, ct->regs.ack);
- irq_gc_unlock(gc);
-}
-
static void brcmstb_l2_intc_irq_handle(struct irq_desc *desc)
{
struct brcmstb_l2_intc_data *b = irq_desc_get_handler_data(desc);
@@ -248,7 +222,7 @@ static int __init brcmstb_l2_intc_of_init(struct device_node *np,
if (init_params->cpu_clear >= 0) {
ct->regs.ack = init_params->cpu_clear;
ct->chip.irq_ack = irq_gc_ack_set_bit;
- ct->chip.irq_mask_ack = brcmstb_l2_mask_and_ack;
+ ct->chip.irq_mask_ack = irq_gc_mask_disable_and_ack_set;
} else {
/* No Ack - but still slightly more efficient to define this */
ct->chip.irq_mask_ack = irq_gc_mask_disable_reg;
--
2.47.1
next reply other threads:[~2024-12-24 0:17 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-24 0:17 linux [this message]
2025-01-03 4:44 ` Florian Fainelli
2025-01-15 9:16 ` [tip: irq/core] irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function tip-bot2 for Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241224001727.149337-1-linux@treblig.org \
--to=linux@treblig.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=florian.fainelli@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®