From: John Madieu <john.madieu.xa@bp.renesas.com>
To: john.madieu.xa@bp.renesas.com
Cc: biju.das.jz@bp.renesas.com, claudiu.beznea.uj@bp.renesas.com,
conor+dt@kernel.org, devicetree@vger.kernel.org,
geert+renesas@glider.be, john.madieu@gmail.com,
krzk+dt@kernel.org, linux-kernel@vger.kernel.org,
linux-renesas-soc@vger.kernel.org, magnus.damm@gmail.com,
robh@kernel.org
Subject: [PATCH v2 3/4] soc: renesas: rz-sysc: Add support for RZ/G3E family
Date: Wed, 1 Jan 2025 17:33:43 +0100 [thread overview]
Message-ID: <20250101163344.128139-4-john.madieu.xa@bp.renesas.com> (raw)
In-Reply-To: <20250101163344.128139-1-john.madieu.xa@bp.renesas.com>
Add SoC detection support for RZ/G3E SoC. Also add support for detecting the
number of cores and ETHOS-U55 NPU and also detect PLL mismatch for SW settings
other than 1.7GHz.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
---
Changes in v2:
- Group bitfields ordered by registers
- Rename SoC-specific callback field to 'print_id'
- Explicitely select 'MFD_SYSCON' config option
- Do not rely on 'syscon'-compatible probing anymore.
drivers/soc/renesas/Kconfig | 6 +++
drivers/soc/renesas/Makefile | 1 +
drivers/soc/renesas/r9a09g047-sysc.c | 73 ++++++++++++++++++++++++++++
drivers/soc/renesas/rz-sysc.c | 22 ++++++++-
drivers/soc/renesas/rz-sysc.h | 6 +++
5 files changed, 106 insertions(+), 2 deletions(-)
create mode 100644 drivers/soc/renesas/r9a09g047-sysc.c
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index a792a3e915fe..33759f69c37c 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -348,6 +348,7 @@ config ARCH_R9A09G011
config ARCH_R9A09G047
bool "ARM64 Platform support for RZ/G3E"
+ select SYSC_R9A09G047
help
This enables support for the Renesas RZ/G3E SoC variants.
@@ -386,9 +387,14 @@ config RST_RCAR
config SYSC_RZ
bool "System controller for RZ SoCs" if COMPILE_TEST
+ select MFD_SYSCON
config SYSC_R9A08G045
bool "Renesas RZ/G3S System controller support" if COMPILE_TEST
select SYSC_RZ
+config SYSC_R9A09G047
+ bool "Renesas RZ/G3E System controller support" if COMPILE_TEST
+ select SYSC_RZ
+
endif # SOC_RENESAS
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index 8cd139b3dd0a..3256706112d9 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -7,6 +7,7 @@ ifdef CONFIG_SMP
obj-$(CONFIG_ARCH_R9A06G032) += r9a06g032-smp.o
endif
obj-$(CONFIG_SYSC_R9A08G045) += r9a08g045-sysc.o
+obj-$(CONFIG_SYSC_R9A09G047) += r9a09g047-sysc.o
# Family
obj-$(CONFIG_PWC_RZV2M) += pwc-rzv2m.o
diff --git a/drivers/soc/renesas/r9a09g047-sysc.c b/drivers/soc/renesas/r9a09g047-sysc.c
new file mode 100644
index 000000000000..3ad6057f9196
--- /dev/null
+++ b/drivers/soc/renesas/r9a09g047-sysc.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RZ/G3E System controller driver
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include "rz-sysc.h"
+
+/* Register Offsets */
+#define SYS_LSI_DEVID 0x304
+#define SYS_LSI_DEVID_REV GENMASK(31, 28)
+#define SYS_LSI_DEVID_SPECIFIC GENMASK(27, 0)
+#define SYS_LSI_MODE 0x300
+/*
+ * BOOTPLLCA[1:0]
+ * [0,0] => 1.1GHZ
+ * [0,1] => 1.5GHZ
+ * [1,0] => 1.6GHZ
+ * [1,1] => 1.7GHZ
+ */
+#define SYS_LSI_MODE_STAT_BOOTPLLCA55 GENMASK(12, 11)
+#define SYS_LSI_MODE_CA55_1_7GHZ 0x3
+#define SYS_LSI_PRR 0x308
+#define SYS_LSI_PRR_CA55_DIS BIT(8)
+#define SYS_LSI_PRR_NPU_DIS BIT(1)
+#define SYS_MAX_REG 0x170c
+
+
+static void rzg3e_sysc_print_id(struct device *dev,
+ void __iomem *sysc_base,
+ struct soc_device_attribute *soc_dev_attr)
+{
+ bool is_quad_core, npu_enabled;
+ u32 prr_val, mode_val;
+
+ prr_val = readl(sysc_base + SYS_LSI_PRR);
+ mode_val = readl(sysc_base + SYS_LSI_MODE);
+
+ /* Check CPU and NPU configuration */
+ is_quad_core = !(prr_val & SYS_LSI_PRR_CA55_DIS);
+ npu_enabled = !(prr_val & SYS_LSI_PRR_NPU_DIS);
+
+ dev_info(dev, "Detected Renesas %s Core %s %s Rev %s%s\n",
+ is_quad_core ? "Quad" : "Dual",
+ soc_dev_attr->family,
+ soc_dev_attr->soc_id,
+ soc_dev_attr->revision,
+ npu_enabled ? " with Ethos-U55" : "");
+
+ /* Check CA55 PLL configuration */
+ if (FIELD_GET(SYS_LSI_MODE_STAT_BOOTPLLCA55, mode_val) != SYS_LSI_MODE_CA55_1_7GHZ)
+ dev_warn(dev, "CA55 PLL is not set to 1.7GHz\n");
+}
+
+static const struct rz_sysc_soc_id_init_data rzg3e_sysc_soc_id_init_data __initconst = {
+ .family = "RZ/G3E",
+ .id = 0x8679447,
+ .offset = SYS_LSI_DEVID,
+ .revision_mask = SYS_LSI_DEVID_REV,
+ .specific_id_mask = SYS_LSI_DEVID_SPECIFIC,
+ .print_id = rzg3e_sysc_print_id,
+};
+
+const struct rz_sysc_init_data rzg3e_sysc_init_data = {
+ .soc_id_init_data = &rzg3e_sysc_soc_id_init_data,
+ .max_register_offset = SYS_MAX_REG,
+};
diff --git a/drivers/soc/renesas/rz-sysc.c b/drivers/soc/renesas/rz-sysc.c
index e472fda3995b..6a33807e925a 100644
--- a/drivers/soc/renesas/rz-sysc.c
+++ b/drivers/soc/renesas/rz-sysc.c
@@ -130,6 +130,10 @@ static bool rz_sysc_writeable_reg(struct device *dev, unsigned int off)
struct rz_sysc *sysc = dev_get_drvdata(dev);
struct rz_sysc_signal *signal;
+ /* Fast path if not signal-aware */
+ if (!sysc->num_signals)
+ return true;
+
/* Any register containing a signal is writeable. */
signal = rz_sysc_off_to_signal(sysc, off, 0);
if (signal)
@@ -143,6 +147,10 @@ static bool rz_sysc_readable_reg(struct device *dev, unsigned int off)
struct rz_sysc *sysc = dev_get_drvdata(dev);
struct rz_sysc_signal *signal;
+ /* Fast path if not signal-aware */
+ if (!sysc->num_signals)
+ return true;
+
/* Any register containing a signal is readable. */
signal = rz_sysc_off_to_signal(sysc, off, 0);
if (signal)
@@ -257,8 +265,15 @@ static int rz_sysc_soc_init(struct rz_sysc *sysc, const struct of_device_id *mat
return -ENODEV;
}
- dev_info(sysc->dev, "Detected Renesas %s %s Rev %s\n", soc_dev_attr->family,
- soc_dev_attr->soc_id, soc_dev_attr->revision);
+ /* Try to call SoC-specific device identification */
+ if (soc_data->print_id) {
+ soc_data->print_id(sysc->dev, sysc->base, soc_dev_attr);
+ } else {
+ dev_info(sysc->dev, "Detected Renesas %s %s Rev %s\n",
+ soc_dev_attr->family,
+ soc_dev_attr->soc_id,
+ soc_dev_attr->revision);
+ }
soc_dev = soc_device_register(soc_dev_attr);
if (IS_ERR(soc_dev))
@@ -283,6 +298,9 @@ static struct regmap_config rz_sysc_regmap = {
static const struct of_device_id rz_sysc_match[] = {
#ifdef CONFIG_SYSC_R9A08G045
{ .compatible = "renesas,r9a08g045-sysc", .data = &rzg3s_sysc_init_data },
+#endif
+#ifdef CONFIG_SYSC_R9A09G047
+ { .compatible = "renesas,r9a09g047-sys", .data = &rzg3e_sysc_init_data },
#endif
{ }
};
diff --git a/drivers/soc/renesas/rz-sysc.h b/drivers/soc/renesas/rz-sysc.h
index babca9c743c7..2c92b252b40c 100644
--- a/drivers/soc/renesas/rz-sysc.h
+++ b/drivers/soc/renesas/rz-sysc.h
@@ -8,7 +8,9 @@
#ifndef __SOC_RENESAS_RZ_SYSC_H__
#define __SOC_RENESAS_RZ_SYSC_H__
+#include <linux/device.h>
#include <linux/refcount.h>
+#include <linux/sys_soc.h>
#include <linux/types.h>
/**
@@ -42,6 +44,7 @@ struct rz_sysc_signal {
* @offset: SYSC SoC ID register offset
* @revision_mask: SYSC SoC ID revision mask
* @specific_id_mask: SYSC SoC ID specific ID mask
+ * @print_id: SoC-specific extended device identification
*/
struct rz_sysc_soc_id_init_data {
const char * const family;
@@ -49,6 +52,8 @@ struct rz_sysc_soc_id_init_data {
u32 offset;
u32 revision_mask;
u32 specific_id_mask;
+ void (*print_id)(struct device *dev, void __iomem *sysc_base,
+ struct soc_device_attribute *soc_dev_attr);
};
/**
@@ -65,6 +70,7 @@ struct rz_sysc_init_data {
u32 max_register_offset;
};
+extern const struct rz_sysc_init_data rzg3e_sysc_init_data;
extern const struct rz_sysc_init_data rzg3s_sysc_init_data;
#endif /* __SOC_RENESAS_RZ_SYSC_H__ */
--
2.25.1
next prev parent reply other threads:[~2025-01-01 16:39 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-06 21:25 [PATCH 0/5] soc: renesas: Add system controller support for RZ/G3E SoC John Madieu
2024-12-06 21:25 ` [PATCH 1/5] dt-bindings: arm: renesas: Add syscon compatibility to RZ/V2H(P) SYS Controller John Madieu
2024-12-06 21:25 ` [PATCH 2/5] dt-bindings: soc: renesas: Document Renesas RZ/G3E SoC variants John Madieu
2024-12-10 21:55 ` Rob Herring
2024-12-12 18:54 ` John Madieu
2024-12-13 16:06 ` Geert Uytterhoeven
2024-12-14 4:05 ` John Madieu
2024-12-06 21:25 ` [PATCH 3/5] soc: renesas: rz-sysc: Add support for RZ/G3E family John Madieu
2024-12-07 10:21 ` Claudiu Beznea
2024-12-09 11:30 ` John Madieu
2024-12-07 10:29 ` Biju Das
2024-12-09 10:44 ` John Madieu
2024-12-07 10:36 ` Biju Das
2024-12-09 10:43 ` John Madieu
2024-12-13 16:24 ` Geert Uytterhoeven
2024-12-14 4:36 ` John Madieu
2024-12-16 9:03 ` Geert Uytterhoeven
2024-12-06 21:25 ` [PATCH 4/5] arm64: dts: renesas: r9a09g047: add sys node John Madieu
2024-12-13 16:30 ` Geert Uytterhoeven
2024-12-06 21:25 ` [PATCH 5/5] arm64: dts: renesas: r9a09g057: Add syscon compatibility to " John Madieu
2024-12-11 21:08 ` [PATCH 0/5] soc: renesas: Add system controller support for RZ/G3E SoC Rob Herring
2024-12-13 15:50 ` Geert Uytterhoeven
2024-12-13 16:25 ` Geert Uytterhoeven
2024-12-14 4:49 ` John Madieu
2025-01-01 16:33 ` [PATCH v2 0/4] " John Madieu
2025-01-01 16:33 ` [PATCH v2 1/4] dt-bindings: soc: renesas: Add RZ/G3E variant SYS bindings John Madieu
2025-01-03 19:06 ` Rob Herring (Arm)
2025-01-01 16:33 ` [PATCH v2 2/4] soc: renesas: rz-sysc: Fix SoC ID string extraction John Madieu
2025-01-02 20:14 ` Geert Uytterhoeven
2025-01-01 16:33 ` John Madieu [this message]
2025-01-01 16:33 ` [PATCH v2 4/4] arm64: dts: renesas: r9a09g047: add sys node John Madieu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250101163344.128139-4-john.madieu.xa@bp.renesas.com \
--to=john.madieu.xa@bp.renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=john.madieu@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®