From: Santhosh Kumar K <s-k6@ti.com>
To: <miquel.raynal@bootlin.com>, <richard@nod.at>, <vigneshr@ti.com>,
<quic_sridsn@quicinc.com>, <quic_mdalam@quicinc.com>
Cc: <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
<p-mantena@ti.com>, <s-k6@ti.com>
Subject: [PATCH 2/3] mtd: spinand: winbond: Add support for W35N01JW
Date: Thu, 2 Jan 2025 17:21:09 +0530 [thread overview]
Message-ID: <20250102115110.1402440-3-s-k6@ti.com> (raw)
In-Reply-To: <20250102115110.1402440-1-s-k6@ti.com>
Add support for Winbond's W35N01JW OSPI NAND flash of size 1G-bit. [1]
[1] https://www.winbond.com/export/sites/winbond/datasheet/W35N01JW_Datasheet_Brief.pdf
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
---
drivers/mtd/nand/spi/winbond.c | 41 ++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index 7180e615ac97..fbe41e76ad64 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -18,6 +18,7 @@
#define W25N04KV_STATUS_ECC_5_8_BITFLIPS (3 << 4)
static SPINAND_OP_VARIANTS(read_cache_variants,
+ SPINAND_PAGE_READ_FROM_CACHE_OCTALIO_OP(0, 16, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
@@ -26,10 +27,12 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
static SPINAND_OP_VARIANTS(write_cache_variants,
+ SPINAND_PROG_LOAD_OCTALIO(true, 0, NULL, 0),
SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
SPINAND_PROG_LOAD(true, 0, NULL, 0));
static SPINAND_OP_VARIANTS(update_cache_variants,
+ SPINAND_PROG_LOAD_OCTALIO(false, 0, NULL, 0),
SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
SPINAND_PROG_LOAD(false, 0, NULL, 0));
@@ -112,6 +115,30 @@ static int w25n02kv_ooblayout_free(struct mtd_info *mtd, int section,
return 0;
}
+static int w35n01jw_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ region->offset = (16 * section) + 12;
+ region->length = 4;
+
+ return 0;
+}
+
+static int w35n01jw_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ region->offset = (16 * section) + 2;
+ region->length = 10;
+
+ return 0;
+}
+
static const struct mtd_ooblayout_ops w25n01kv_ooblayout = {
.ecc = w25n01kv_ooblayout_ecc,
.free = w25n02kv_ooblayout_free,
@@ -122,6 +149,11 @@ static const struct mtd_ooblayout_ops w25n02kv_ooblayout = {
.free = w25n02kv_ooblayout_free,
};
+static const struct mtd_ooblayout_ops w35n01jw_ooblayout = {
+ .ecc = w35n01jw_ooblayout_ecc,
+ .free = w35n01jw_ooblayout_free,
+};
+
static int w25n02kv_ecc_get_status(struct spinand_device *spinand,
u8 status)
{
@@ -208,6 +240,15 @@ static const struct spinand_info winbond_spinand_table[] = {
&update_cache_variants),
0,
SPINAND_ECCINFO(&w25n01kv_ooblayout, w25n02kv_ecc_get_status)),
+ SPINAND_INFO("W35N01JW", /* high-speed 1.8V */
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xdc, 0x21),
+ NAND_MEMORG(1, 4096, 128, 64, 512, 20, 1, 1, 1),
+ NAND_ECCREQ(1, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&w35n01jw_ooblayout, NULL)),
/* 2G-bit densities */
SPINAND_INFO("W25M02GV", /* 2x1G-bit 3.3V */
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab, 0x21),
--
2.34.1
next prev parent reply other threads:[~2025-01-02 11:51 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-02 11:51 [PATCH 0/3] Add OSPI NAND support Santhosh Kumar K
2025-01-02 11:51 ` [PATCH 1/3] mtd: spinand: Define OctalIO ops Santhosh Kumar K
2025-01-15 19:19 ` Miquel Raynal
2025-01-27 6:48 ` Santhosh Kumar K
2025-01-02 11:51 ` Santhosh Kumar K [this message]
2025-01-02 11:51 ` [PATCH 3/3] mtd: spinand: winbond: Fix oob_layout for W25N01JW Santhosh Kumar K
2025-01-15 19:16 ` Miquel Raynal
2025-01-27 6:48 ` Santhosh Kumar K
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250102115110.1402440-3-s-k6@ti.com \
--to=s-k6@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=p-mantena@ti.com \
--cc=quic_mdalam@quicinc.com \
--cc=quic_sridsn@quicinc.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®