From: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Jaehoon Chung <jh80.chung@samsung.com>
Cc: linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 2/5] arm64: dts: exynos8895: add syscon nodes for peric0/1 and fsys0/1
Date: Thu, 2 Jan 2025 22:58:43 +0200 [thread overview]
Message-ID: <20250102205846.223955-3-ivo.ivanov.ivanov1@gmail.com> (raw)
In-Reply-To: <20250102205846.223955-1-ivo.ivanov.ivanov1@gmail.com>
Add syscon nodes for peric0/1, typically used for USI, and fsys0/1,
typically used for PCI.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
---
arch/arm64/boot/dts/exynos/exynos8895.dtsi | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
index 4fb9be850..5302a8c1b 100644
--- a/arch/arm64/boot/dts/exynos/exynos8895.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
@@ -228,6 +228,12 @@ cmu_peric0: clock-controller@10400000 {
"usi1", "usi2", "usi3";
};
+ syscon_peric0: syscon@10420000 {
+ compatible = "samsung,exynos8895-peric0-sysreg", "syscon";
+ reg = <0x10420000 0x2000>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_SYSREG_PERIC0_PCLK>;
+ };
+
serial_0: serial@10430000 {
compatible = "samsung,exynos8895-uart";
reg = <0x10430000 0x100>;
@@ -273,6 +279,12 @@ cmu_peric1: clock-controller@10800000 {
"usi10", "usi11", "usi12", "usi13";
};
+ syscon_peric1: syscon@10820000 {
+ compatible = "samsung,exynos8895-peric1-sysreg", "syscon";
+ reg = <0x10820000 0x2000>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SYSREG_PERIC1_PCLK>;
+ };
+
serial_1: serial@10830000 {
compatible = "samsung,exynos8895-uart";
reg = <0x10830000 0x100>;
@@ -380,6 +392,12 @@ cmu_fsys0: clock-controller@11000000 {
"ufs", "usbdrd30";
};
+ syscon_fsys0: syscon@11020000 {
+ compatible = "samsung,exynos8895-fsys0-sysreg", "syscon";
+ reg = <0x11020000 0x2000>;
+ clocks = <&cmu_fsys0 CLK_GOUT_FSYS0_SYSREG_FSYS0_PCLK>;
+ };
+
pinctrl_fsys0: pinctrl@11050000 {
compatible = "samsung,exynos8895-pinctrl";
reg = <0x11050000 0x1000>;
@@ -398,6 +416,12 @@ cmu_fsys1: clock-controller@11400000 {
clock-names = "oscclk", "bus", "pcie", "ufs", "mmc";
};
+ syscon_fsys1: syscon@11420000 {
+ compatible = "samsung,exynos8895-fsys1-sysreg", "syscon";
+ reg = <0x11420000 0x2000>;
+ clocks = <&cmu_fsys1 CLK_GOUT_FSYS1_SYSREG_FSYS1_PCLK>;
+ };
+
pinctrl_fsys1: pinctrl@11430000 {
compatible = "samsung,exynos8895-pinctrl";
reg = <0x11430000 0x1000>;
--
2.43.0
next prev parent reply other threads:[~2025-01-02 20:59 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-02 20:58 [PATCH v1 0/5] arm64: dts: exynos8895: define usi and mmc nodes Ivaylo Ivanov
2025-01-02 20:58 ` [PATCH v1 1/5] dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8895 Ivaylo Ivanov
2025-01-03 8:37 ` Krzysztof Kozlowski
2025-01-02 20:58 ` Ivaylo Ivanov [this message]
2025-01-03 8:42 ` [PATCH v1 2/5] arm64: dts: exynos8895: add syscon nodes for peric0/1 and fsys0/1 Krzysztof Kozlowski
2025-01-02 20:58 ` [PATCH v1 3/5] arm64: dts: exynos8895: define all usi nodes Ivaylo Ivanov
2025-01-02 20:58 ` [PATCH v1 4/5] arm64: dts: exynos8895: add a node for mmc Ivaylo Ivanov
2025-01-02 20:58 ` [PATCH v1 5/5] arm64: dts: exynos: exynos8895-dreamlte: enable support for microSD storage Ivaylo Ivanov
2025-01-02 21:30 ` Markuss Broks
2025-01-03 15:20 ` [PATCH v1 0/5] arm64: dts: exynos8895: define usi and mmc nodes Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250102205846.223955-3-ivo.ivanov.ivanov1@gmail.com \
--to=ivo.ivanov.ivanov1@gmail.com \
--cc=alim.akhtar@samsung.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jh80.chung@samsung.com \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=robh@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®