From: "Bence Csókás" <csokas.bence@prolan.hu>
To: <linux-sound@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-sunxi@lists.linux.dev>, <linux-kernel@vger.kernel.org>
Cc: "Bence Csókás" <csokas.bence@prolan.hu>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Jaroslav Kysela" <perex@perex.cz>,
"Takashi Iwai" <tiwai@suse.com>, "Chen-Yu Tsai" <wens@csie.org>,
"Jernej Skrabec" <jernej.skrabec@gmail.com>,
"Samuel Holland" <samuel@sholland.org>,
"Philipp Zabel" <p.zabel@pengutronix.de>
Subject: [PATCH v2] ASoC: sun4i-codec: Use new devm clk and reset APIs
Date: Tue, 14 Jan 2025 10:59:07 +0100 [thread overview]
Message-ID: <20250114095909.798559-1-csokas.bence@prolan.hu> (raw)
Clean up error handling by using the new devm_
clock and reset functions. This should make it
easier to add new code, as we can eliminate the
"goto ladder" in probe().
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
---
Notes:
Changes in v2:
* remove unused `scodec` var
* rebase onto current for-next
sound/soc/sunxi/sun4i-codec.c | 42 ++++++-----------------------------
1 file changed, 7 insertions(+), 35 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index 3d6156fefe75..886b3fa537d2 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -2273,7 +2273,7 @@ static int sun4i_codec_probe(struct platform_device *pdev)
}
/* Get the clocks from the DT */
- scodec->clk_apb = devm_clk_get(&pdev->dev, "apb");
+ scodec->clk_apb = devm_clk_get_enabled(&pdev->dev, "apb");
if (IS_ERR(scodec->clk_apb)) {
dev_err(&pdev->dev, "Failed to get the APB clock\n");
return PTR_ERR(scodec->clk_apb);
@@ -2286,8 +2286,7 @@ static int sun4i_codec_probe(struct platform_device *pdev)
}
if (quirks->has_reset) {
- scodec->rst = devm_reset_control_get_exclusive(&pdev->dev,
- NULL);
+ scodec->rst = devm_reset_control_get_exclusive_deasserted(&pdev->dev, NULL);
if (IS_ERR(scodec->rst)) {
dev_err(&pdev->dev, "Failed to get reset control\n");
return PTR_ERR(scodec->rst);
@@ -2323,22 +2322,6 @@ static int sun4i_codec_probe(struct platform_device *pdev)
return ret;
}
- /* Enable the bus clock */
- if (clk_prepare_enable(scodec->clk_apb)) {
- dev_err(&pdev->dev, "Failed to enable the APB clock\n");
- return -EINVAL;
- }
-
- /* Deassert the reset control */
- if (scodec->rst) {
- ret = reset_control_deassert(scodec->rst);
- if (ret) {
- dev_err(&pdev->dev,
- "Failed to deassert the reset control\n");
- goto err_clk_disable;
- }
- }
-
/* DMA configuration for TX FIFO */
scodec->playback_dma_data.addr = res->start + quirks->reg_dac_txdata;
scodec->playback_dma_data.maxburst = quirks->dma_max_burst;
@@ -2356,7 +2339,7 @@ static int sun4i_codec_probe(struct platform_device *pdev)
&sun4i_codec_dai, 1);
if (ret) {
dev_err(&pdev->dev, "Failed to register our codec\n");
- goto err_assert_reset;
+ return ret;
}
ret = devm_snd_soc_register_component(&pdev->dev,
@@ -2364,20 +2347,20 @@ static int sun4i_codec_probe(struct platform_device *pdev)
&dummy_cpu_dai, 1);
if (ret) {
dev_err(&pdev->dev, "Failed to register our DAI\n");
- goto err_assert_reset;
+ return ret;
}
ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
if (ret) {
dev_err(&pdev->dev, "Failed to register against DMAEngine\n");
- goto err_assert_reset;
+ return ret;
}
card = quirks->create_card(&pdev->dev);
if (IS_ERR(card)) {
ret = PTR_ERR(card);
dev_err(&pdev->dev, "Failed to create our card\n");
- goto err_assert_reset;
+ return ret;
}
snd_soc_card_set_drvdata(card, scodec);
@@ -2385,28 +2368,17 @@ static int sun4i_codec_probe(struct platform_device *pdev)
ret = snd_soc_register_card(card);
if (ret) {
dev_err_probe(&pdev->dev, ret, "Failed to register our card\n");
- goto err_assert_reset;
+ return ret;
}
return 0;
-
-err_assert_reset:
- if (scodec->rst)
- reset_control_assert(scodec->rst);
-err_clk_disable:
- clk_disable_unprepare(scodec->clk_apb);
- return ret;
}
static void sun4i_codec_remove(struct platform_device *pdev)
{
struct snd_soc_card *card = platform_get_drvdata(pdev);
- struct sun4i_codec *scodec = snd_soc_card_get_drvdata(card);
snd_soc_unregister_card(card);
- if (scodec->rst)
- reset_control_assert(scodec->rst);
- clk_disable_unprepare(scodec->clk_apb);
}
static struct platform_driver sun4i_codec_driver = {
--
2.48.0
next reply other threads:[~2025-01-14 9:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-14 9:59 Bence Csókás [this message]
2025-01-14 16:35 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250114095909.798559-1-csokas.bence@prolan.hu \
--to=csokas.bence@prolan.hu \
--cc=broonie@kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=p.zabel@pengutronix.de \
--cc=perex@perex.cz \
--cc=samuel@sholland.org \
--cc=tiwai@suse.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®