From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Maud Spierings <maud_spierings@hotmail.com>
Subject: [PATCH 0/2] arm64: dts: qcom: x1e80100-vivobook-s15: Add usb a and sd-card reader
Date: Sun, 19 Jan 2025 15:50:50 +0100 [thread overview]
Message-ID: <20250119-usb_a_micro_sd-v1-0-01eb7502ae05@hotmail.com> (raw)
The Asus Vivobook s15 has 2 5gbps usb A ports on the right side which
are controlled by the usb_mp controller enable them and the retimers
required.
There is also a micro sd-card reader on the left side below the two
usb-c ports, this one is attached to the usb_2 controller. Enable it and
the retimer to enable the micro sd-card reader.
The micro sd-card reader seems to have so interesting behaviour, on my
machine and someone elses it kind of half works, but not really, the
same under windows, unusable. Either we both got unlucky with a hardware
defect or there is something else going on, however two other people did
succesfully test it, one of which on (free?)bsd instead of linux even.
One hypothesis is that this area is where the charging circuitry is,
which gets *very* hot while charging and might damage this bit of
hardware. However this is very much speculation and not based on
anything concrete.
Symptoms of dysfunctional sd-card reader:
The sd card will get detected, a usb device will appear as "Genesys Logic
STORAGE DEVICE" 05e3:0747
log:
[ 2456.648075] usb 1-1: new high-speed USB device number 3 using xhci-hcd
[ 2456.792703] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 2456.795530] scsi host0: usb-storage 1-1:1.0
[ 2457.840518] scsi 0:0:0:0: Direct-Access Generic MassStorageClass
2402 PQ: 0 ANSI: 6
[ 2458.072281] sd 0:0:0:0: [sda] Media removed, stopped polling
[ 2458.073001] sd 0:0:0:0: [sda] Attached SCSI removable disk
/dev/sda will appear, but it will not do anything, fdisk rejects it etc
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
---
Maud Spierings (2):
arm64: dts: qcom: x1e80100-vivobook-s15: Enable USB-A ports
arm64: dts: qcom: x1e80100-vivobook-s15: Enable micro-sd card reader
.../boot/dts/qcom/x1e80100-asus-vivobook-s15.dts | 142 ++++++++++++++++++++-
1 file changed, 141 insertions(+), 1 deletion(-)
---
base-commit: 0907e7fb35756464aa34c35d6abb02998418164b
change-id: 20250119-usb_a_micro_sd-4c476ea769b1
Best regards,
--
Maud Spierings <maud_spierings@hotmail.com>
next reply other threads:[~2025-01-19 14:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-19 14:50 Maud Spierings via B4 Relay [this message]
2025-01-19 14:50 ` [PATCH 1/2] arm64: dts: qcom: x1e80100-vivobook-s15: Enable USB-A ports Maud Spierings via B4 Relay
2025-01-19 21:50 ` Mark Kettenis
2025-01-19 14:50 ` [PATCH 2/2] arm64: dts: qcom: x1e80100-vivobook-s15: Enable micro-sd card reader Maud Spierings via B4 Relay
2025-01-19 21:55 ` Mark Kettenis
2025-01-19 21:53 ` [PATCH 0/2] arm64: dts: qcom: x1e80100-vivobook-s15: Add usb a and sd-card reader Mark Kettenis
2025-02-28 7:35 ` Maud Spierings
2025-03-17 2:55 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250119-usb_a_micro_sd-v1-0-01eb7502ae05@hotmail.com \
--to=devnull+maud_spierings.hotmail.com@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maud_spierings@hotmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®