[PATCH v6 1/6] phy: phy-rockchip-samsung-hdptx: Swap the definitions of LCPLL_REF and ROPLL_REF

[Damon Ding <damon.ding@rock-chips.com>]

According to the datasheet, setting the dig_clk_sel bit of CMN_REG(0097)
to 1'b1 selects LCPLL as the reference clock, while setting it to 1'b0
selects the ROPLL.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index 0965b9d4f9cf..efbea5b67c89 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -94,8 +94,8 @@
 #define LCPLL_ALONE_MODE		BIT(1)
 /* CMN_REG(0097) */
 #define DIG_CLK_SEL			BIT(1)
-#define ROPLL_REF			BIT(1)
-#define LCPLL_REF			0
+#define LCPLL_REF			BIT(1)
+#define ROPLL_REF			0
 /* CMN_REG(0099) */
 #define CMN_ROPLL_ALONE_MODE		BIT(2)
 #define ROPLL_ALONE_MODE		BIT(2)
-- 
2.34.1