[PATCH 2/3] dt-bindings: firmware: stratix10: Convert to json-schema

[Mahesh Rao <mahesh.rao@intel.com>]

Convert intel,stratix10-svc service layer devicetree
binding file from freeform format to json-schema.

Signed-off-by: Mahesh Rao <mahesh.rao@intel.com>
---
 .../bindings/firmware/intel,stratix10-svc.txt      | 57 ---------------
 .../bindings/firmware/intel,stratix10-svc.yaml     | 84 ++++++++++++++++++++++
 2 files changed, 84 insertions(+), 57 deletions(-)

diff --git a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
deleted file mode 100644
index 6eff1afd8daf91714d6a18859667d2607e707da7..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Intel Service Layer Driver for Stratix10 SoC
-============================================
-Intel Stratix10 SoC is composed of a 64 bit quad-core ARM Cortex A53 hard
-processor system (HPS) and Secure Device Manager (SDM). When the FPGA is
-configured from HPS, there needs to be a way for HPS to notify SDM the
-location and size of the configuration data. Then SDM will get the
-configuration data from that location and perform the FPGA configuration.
-
-To meet the whole system security needs and support virtual machine requesting
-communication with SDM, only the secure world of software (EL3, Exception
-Layer 3) can interface with SDM. All software entities running on other
-exception layers must channel through the EL3 software whenever it needs
-service from SDM.
-
-Intel Stratix10 service layer driver, running at privileged exception level
-(EL1, Exception Layer 1), interfaces with the service providers and provides
-the services for FPGA configuration, QSPI, Crypto and warm reset. Service layer
-driver also manages secure monitor call (SMC) to communicate with secure monitor
-code running in EL3.
-
-Required properties:
--------------------
-The svc node has the following mandatory properties, must be located under
-the firmware node.
-
-- compatible: "intel,stratix10-svc" or "intel,agilex-svc"
-- method: smc or hvc
-        smc - Secure Monitor Call
-        hvc - Hypervisor Call
-- memory-region:
-	phandle to the reserved memory node. See
-	Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
-	for details
-
-Example:
--------
-
-	reserved-memory {
-                #address-cells = <2>;
-                #size-cells = <2>;
-                ranges;
-
-                service_reserved: svcbuffer@0 {
-                        compatible = "shared-dma-pool";
-                        reg = <0x0 0x0 0x0 0x1000000>;
-                        alignment = <0x1000>;
-                        no-map;
-                };
-        };
-
-	firmware {
-		svc {
-			compatible = "intel,stratix10-svc";
-			method = "smc";
-			memory-region = <&service_reserved>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..b8aae996da87c16007efa7e5e12cced1432b62e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/intel,stratix10-svc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Service Layer Driver for Stratix10 SoC
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+description: |
+  Intel Stratix10 SoC is composed of a 64 bit quad-core ARM Cortex A53 hard
+  processor system (HPS) and Secure Device Manager (SDM). When the FPGA is
+  configured from HPS, there needs to be a way for HPS to notify SDM the
+  location and size of the configuration data. Then SDM will get the
+  configuration data from that location and perform the FPGA configuration.
+
+  To meet the whole system security needs and support virtual machine requesting
+  communication with SDM, only the secure world of software (EL3, Exception
+  Layer 3) can interface with SDM. All software entities running on other
+  exception layers must channel through the EL3 software whenever it needs
+  service from SDM.
+
+  Intel Stratix10 service layer driver, running at privileged exception level
+  (EL1, Exception Layer 1), interfaces with the service providers and provides
+  the services for FPGA configuration, QSPI, Crypto and warm reset. Service layer
+  driver also manages secure monitor call (SMC) to communicate with secure monitor
+  code running in EL3.
+
+properties:
+  compatible:
+    enum:
+      - intel,stratix10-svc
+      - intel,agilex-svc
+
+  method:
+    enum: [smc, hvc]
+    description: supervisory call method to be used for the service layer.
+
+  memory-region:
+    maxItems: 1
+    description:
+      phandle to a reserved memory region for the service layer driver to
+      communicate with the secure device manager. For more details see
+      Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt.
+
+  fpga-mgr:
+    $ref: /schemas/fpga/intel,stratix10-soc-fpga-mgr.yaml
+    description: Optional child node for fpga manager to perform fabric configuration.
+
+required:
+  - compatible
+  - method
+  - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+    reserved-memory {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      service_reserved: svcbuffer@0 {
+              compatible = "shared-dma-pool";
+              reg = <0x0 0x0 0x0 0x1000000>;
+              alignment = <0x1000>;
+              no-map;
+      };
+    };
+
+    firmware {
+      svc {
+        compatible = "intel,stratix10-svc";
+        method = "smc";
+        memory-region = <&service_reserved>;
+
+        fpga-mgr {
+          compatible = "intel,stratix10-soc-fpga-mgr";
+        };
+      };
+    };
+

-- 
2.35.3