From: Hironori KIKUCHI <kikuchan98@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Hironori KIKUCHI <kikuchan98@gmail.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <quic_jesszhan@quicinc.com>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org
Subject: [PATCH 0/2] drm: panel: Add Generic MIPI Panel Driver
Date: Fri, 31 Jan 2025 15:43:52 +0900 [thread overview]
Message-ID: <20250131064354.4163579-1-kikuchan98@gmail.com> (raw)
This is a Generic MIPI-DSI / DPI(+SPI) dual stack panel driver.
Although the MIPI specifications define how to communicate with a panel
to display an image, some panels still require a panel-specific
initialization sequence to be sent.
While there are many dedicated drivers for such panels, they are very
similar to each other, except for the configuration parameters, including
the initialization sequence for each panel.
Since there are numerous panels in the wild, adding parameters to
the driver for each panel every time is a pain.
Instead, this driver offers more generic and convenient method.
Its fundamental approach is similar to the `panel-mipi-dbi` driver,
which sends an initialization sequence stored in a firmware file.
Moreover, this driver allows display modes, timings, and panel
configuration parameters to be stored in the same file or in DT.
I've also come up with a firmware generator:
https://kikuchan.github.io/panel-firmware-generator/
It helps to create and configure the panel parameters on the web.
As a reference, similar generic drivers currently exist:
* drivers/gpu/drm/panel/panel-simple.c
- Supports wide variety of panels, but no init-sequence support
* drivers/gpu/drm/tiny/panel-mipi-dbi.c
- Supports init-sequence, but only supports DBI panels
* drivers/gpu/drm/panel/panel-dsi-cm.c
- Supports DSI Command Mode, but no init-sequence support
Regards,
kikuchan.
Hironori KIKUCHI (2):
dt-bindings: display: panel: Add generic MIPI-DSI/DPI panels
drm: panel: Add a driver for Generic MIPI-DSI/DPI(+SPI) panels
.../bindings/display/panel/panel-mipi.yaml | 244 +++
drivers/gpu/drm/panel/Kconfig | 10 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-mipi.c | 1355 +++++++++++++++++
4 files changed, 1610 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/panel-mipi.yaml
create mode 100644 drivers/gpu/drm/panel/panel-mipi.c
--
2.48.1
next reply other threads:[~2025-01-31 6:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-31 6:43 Hironori KIKUCHI [this message]
2025-01-31 6:43 ` [PATCH 1/2] dt-bindings: display: panel: Add generic MIPI-DSI/DPI panels Hironori KIKUCHI
2025-01-31 7:47 ` Krzysztof Kozlowski
2025-02-01 5:27 ` Hironori KIKUCHI
2025-01-31 6:43 ` [PATCH 2/2] drm: panel: Add a driver for Generic MIPI-DSI/DPI(+SPI) panels Hironori KIKUCHI
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250131064354.4163579-1-kikuchan98@gmail.com \
--to=kikuchan98@gmail.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_jesszhan@quicinc.com \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®