mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: broonie@kernel.org
To: "Shenghao Ding" <shenghao-ding@ti.com>,
	"Kevin Lu" <kevin-lu@ti.com>, "Baojun Xu" <baojun.xu@ti.com>,
	"Liam Girdwood" <lgirdwood@gmail.com>,
	"Jaroslav Kysela" <perex@perex.cz>,
	"Takashi Iwai" <tiwai@suse.com>, "Dan Murphy" <dmurphy@ti.com>,
	"Hector Martin" <marcan@marcan.st>,
	"Martin Povišer" <povik+lin@cutebit.org>
Cc: linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
	 devicetree@vger.kernel.org, Mark Brown <broonie@kernel.org>
Subject: [PATCH 1/4] ASoC: tas2764: Power up/down amp on mute ops
Date: Sat, 08 Feb 2025 01:03:24 +0000	[thread overview]
Message-ID: <20250208-asoc-tas2764-v1-1-dbab892a69b5@kernel.org> (raw)
In-Reply-To: <20250208-asoc-tas2764-v1-0-dbab892a69b5@kernel.org>

From: Hector Martin <marcan@marcan.st>

The ASoC convention is that clocks are removed after codec mute, and
power up/down is more about top level power management. For these chips,
the "mute" state still expects a TDM clock, and yanking the clock in
this state will trigger clock errors. So, do the full
shutdown<->mute<->active transition on the mute operation, so the amp is
in software shutdown by the time the clocks are removed.

This fixes TDM clock errors when streams are stopped.

Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/codecs/tas2764.c | 51 +++++++++++++++++++---------------------------
 1 file changed, 21 insertions(+), 30 deletions(-)

diff --git a/sound/soc/codecs/tas2764.c b/sound/soc/codecs/tas2764.c
index d482cd194c08..60d660a88fab 100644
--- a/sound/soc/codecs/tas2764.c
+++ b/sound/soc/codecs/tas2764.c
@@ -180,33 +180,6 @@ static SOC_ENUM_SINGLE_DECL(
 static const struct snd_kcontrol_new tas2764_asi1_mux =
 	SOC_DAPM_ENUM("ASI1 Source", tas2764_ASI1_src_enum);
 
-static int tas2764_dac_event(struct snd_soc_dapm_widget *w,
-			     struct snd_kcontrol *kcontrol, int event)
-{
-	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
-	struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component);
-	int ret;
-
-	switch (event) {
-	case SND_SOC_DAPM_POST_PMU:
-		tas2764->dac_powered = true;
-		ret = tas2764_update_pwr_ctrl(tas2764);
-		break;
-	case SND_SOC_DAPM_PRE_PMD:
-		tas2764->dac_powered = false;
-		ret = tas2764_update_pwr_ctrl(tas2764);
-		break;
-	default:
-		dev_err(tas2764->dev, "Unsupported event\n");
-		return -EINVAL;
-	}
-
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
 static const struct snd_kcontrol_new isense_switch =
 	SOC_DAPM_SINGLE("Switch", TAS2764_PWR_CTRL, TAS2764_ISENSE_POWER_EN, 1, 1);
 static const struct snd_kcontrol_new vsense_switch =
@@ -219,8 +192,7 @@ static const struct snd_soc_dapm_widget tas2764_dapm_widgets[] = {
 			    1, &isense_switch),
 	SND_SOC_DAPM_SWITCH("VSENSE", TAS2764_PWR_CTRL, TAS2764_VSENSE_POWER_EN,
 			    1, &vsense_switch),
-	SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, tas2764_dac_event,
-			   SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+	SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_OUTPUT("OUT"),
 	SND_SOC_DAPM_SIGGEN("VMON"),
 	SND_SOC_DAPM_SIGGEN("IMON")
@@ -241,9 +213,28 @@ static int tas2764_mute(struct snd_soc_dai *dai, int mute, int direction)
 {
 	struct tas2764_priv *tas2764 =
 			snd_soc_component_get_drvdata(dai->component);
+	int ret;
+
+	if (!mute) {
+		tas2764->dac_powered = true;
+		ret = tas2764_update_pwr_ctrl(tas2764);
+		if (ret)
+			return ret;
+	}
 
 	tas2764->unmuted = !mute;
-	return tas2764_update_pwr_ctrl(tas2764);
+	ret = tas2764_update_pwr_ctrl(tas2764);
+	if (ret)
+		return ret;
+
+	if (mute) {
+		tas2764->dac_powered = false;
+		ret = tas2764_update_pwr_ctrl(tas2764);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 static int tas2764_set_bitwidth(struct tas2764_priv *tas2764, int bitwidth)

-- 
2.39.5


  reply	other threads:[~2025-02-08  1:03 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-08  1:03 [PATCH 0/4] ASoC: tas2764: Random patches from the Asahi Linux tree broonie
2025-02-08  1:03 ` broonie [this message]
2025-02-08  1:03 ` [PATCH 2/4] ASoC: tas2764: Wait for ramp-down after shutdown broonie
2025-02-08  1:03 ` [PATCH 3/4] ASoC: tas2764: Mark SW_RESET as volatile broonie
2025-02-08  1:03 ` [PATCH 4/4] ASoC: tas2764: Add reg defaults for TAS2764_INT_CLK_CFG broonie
2025-02-17 14:32 ` [PATCH 0/4] ASoC: tas2764: Random patches from the Asahi Linux tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250208-asoc-tas2764-v1-1-dbab892a69b5@kernel.org \
    --to=broonie@kernel.org \
    --cc=baojun.xu@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=kevin-lu@ti.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=marcan@marcan.st \
    --cc=perex@perex.cz \
    --cc=povik+lin@cutebit.org \
    --cc=shenghao-ding@ti.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®