[PATCH RESEND v6 2/3] arm64: dts: rockchip: Add HDMI0 audio output for rk3588 SoC

[Detlev Casanova <detlev.casanova@collabora.com>]

Use the simple-audio-card driver with the hdmi0 QP node as CODEC and
the i2s5 device as CPU.

The simple-audio-card,mclk-fs value is set to 128 as it is done in
the downstream driver.

The #sound-dai-cells value is set to 0 in the hdmi0 node so that it can be
used as an audio codec node.

Tested-by: Quentin Schulz <quentin.schulz@cherry.de> # RK3588 Tiger Haikou
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
---
 arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index 8cfa30837ce72..f9f888dedd8f0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -382,6 +382,22 @@ scmi_reset: protocol@16 {
 		};
 	};
 
+	hdmi0_sound: hdmi0-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,name = "hdmi0";
+		status = "disabled";
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi0>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s5_8ch>;
+		};
+	};
+
 	pmu-a55 {
 		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition0>;
@@ -1394,6 +1410,7 @@ hdmi0: hdmi@fde80000 {
 		reset-names = "ref", "hdp";
 		rockchip,grf = <&sys_grf>;
 		rockchip,vo-grf = <&vo1_grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
-- 
2.48.1