From: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Alim Akhtar <alim.akhtar@samsung.com>,
Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh@kernel.org>, Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 3/3] pinctrl: samsung: add exynos2200 SoC pinctrl configuration
Date: Sat, 15 Feb 2025 13:32:48 +0200 [thread overview]
Message-ID: <20250215113248.159386-4-ivo.ivanov.ivanov1@gmail.com> (raw)
In-Reply-To: <20250215113248.159386-1-ivo.ivanov.ivanov1@gmail.com>
Add support for the pin-controller found on the Exynos2200 SoC
used in Samsung Galaxy S22, S22 Plus and S22 Ultra phones.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
---
.../pinctrl/samsung/pinctrl-exynos-arm64.c | 168 ++++++++++++++++++
drivers/pinctrl/samsung/pinctrl-samsung.c | 2 +
drivers/pinctrl/samsung/pinctrl-samsung.h | 1 +
3 files changed, 171 insertions(+)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
index 3ea7106ce..0e310c095 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
@@ -70,6 +70,174 @@ static const struct samsung_pin_bank_type exynos8895_bank_type_off = {
/* Pad retention control code for accessing PMU regmap */
static atomic_t exynos_shared_retention_refcnt;
+/* pin banks of exynos2200 pin-controller - ALIVE */
+static const struct samsung_pin_bank_data exynos2200_pin_banks0[] __initconst = {
+ EXYNOS850_PIN_BANK_EINTW(8, 0x0, "gpa0", 0x00),
+ EXYNOS850_PIN_BANK_EINTW(8, 0x20, "gpa1", 0x04),
+ EXYNOS850_PIN_BANK_EINTW(8, 0x40, "gpa2", 0x08),
+ EXYNOS850_PIN_BANK_EINTW(8, 0x60, "gpa3", 0x0c),
+ EXYNOS850_PIN_BANK_EINTW(2, 0x80, "gpa4", 0x10),
+ EXYNOS_PIN_BANK_EINTN(4, 0xa0, "gpq0"),
+ EXYNOS_PIN_BANK_EINTN(2, 0xc0, "gpq1"),
+ EXYNOS_PIN_BANK_EINTN(2, 0xe0, "gpq2"),
+};
+
+/* pin banks of exynos2200 pin-controller - CMGP */
+static const struct samsung_pin_bank_data exynos2200_pin_banks1[] __initconst = {
+ EXYNOS850_PIN_BANK_EINTW(2, 0x0, "gpm0", 0x00),
+ EXYNOS850_PIN_BANK_EINTW(2, 0x20, "gpm1", 0x04),
+ EXYNOS850_PIN_BANK_EINTW(2, 0x40, "gpm2", 0x08),
+ EXYNOS850_PIN_BANK_EINTW(2, 0x60, "gpm3", 0x0c),
+ EXYNOS850_PIN_BANK_EINTW(2, 0x80, "gpm4", 0x10),
+ EXYNOS850_PIN_BANK_EINTW(2, 0xa0, "gpm5", 0x14),
+ EXYNOS850_PIN_BANK_EINTW(2, 0xc0, "gpm6", 0x18),
+ EXYNOS850_PIN_BANK_EINTW(2, 0xe0, "gpm7", 0x1c),
+ EXYNOS850_PIN_BANK_EINTW(2, 0x100, "gpm8", 0x20),
+ EXYNOS850_PIN_BANK_EINTW(2, 0x120, "gpm9", 0x24),
+ EXYNOS850_PIN_BANK_EINTW(2, 0x140, "gpm10", 0x28),
+ EXYNOS850_PIN_BANK_EINTW(2, 0x160, "gpm11", 0x2c),
+ EXYNOS850_PIN_BANK_EINTW(2, 0x180, "gpm12", 0x30),
+ EXYNOS850_PIN_BANK_EINTW(2, 0x1a0, "gpm13", 0x34),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x1c0, "gpm14", 0x38),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x1e0, "gpm15", 0x3c),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x200, "gpm16", 0x40),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x220, "gpm17", 0x44),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x240, "gpm20", 0x48),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x260, "gpm21", 0x4c),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x280, "gpm22", 0x50),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x2a0, "gpm23", 0x54),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x2c0, "gpm24", 0x58),
+};
+
+/* pin banks of exynos2200 pin-controller - HSI1 */
+static const struct samsung_pin_bank_data exynos2200_pin_banks2[] __initconst = {
+ EXYNOS850_PIN_BANK_EINTG(4, 0x0, "gpf0", 0x00),
+};
+
+/* pin banks of exynos2200 pin-controller - UFS */
+static const struct samsung_pin_bank_data exynos2200_pin_banks3[] __initconst = {
+ EXYNOS850_PIN_BANK_EINTG(7, 0x0, "gpf1", 0x00),
+};
+
+/* pin banks of exynos2200 pin-controller - HSI1UFS */
+static const struct samsung_pin_bank_data exynos2200_pin_banks4[] __initconst = {
+ EXYNOS850_PIN_BANK_EINTG(2, 0x0, "gpf2", 0x00),
+};
+
+/* pin banks of exynos2200 pin-controller - PERIC0 */
+static const struct samsung_pin_bank_data exynos2200_pin_banks5[] __initconst = {
+ EXYNOS850_PIN_BANK_EINTG(4, 0x0, "gpb0", 0x00),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x20, "gpb1", 0x04),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x40, "gpb2", 0x08),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x60, "gpb3", 0x0c),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x80, "gpp4", 0x10),
+ EXYNOS850_PIN_BANK_EINTG(2, 0xa0, "gpc0", 0x14),
+ EXYNOS850_PIN_BANK_EINTG(2, 0xc0, "gpc1", 0x18),
+ EXYNOS850_PIN_BANK_EINTG(2, 0xe0, "gpc2", 0x1c),
+ EXYNOS850_PIN_BANK_EINTG(7, 0x100, "gpg1", 0x20),
+ EXYNOS850_PIN_BANK_EINTG(2, 0x120, "gpg2", 0x24),
+};
+
+/* pin banks of exynos2200 pin-controller - PERIC1 */
+static const struct samsung_pin_bank_data exynos2200_pin_banks6[] __initconst = {
+ EXYNOS850_PIN_BANK_EINTG(4, 0x0, "gpp7", 0x00),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x20, "gpp8", 0x04),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x40, "gpp9", 0x08),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x60, "gpp10", 0x0c),
+};
+
+/* pin banks of exynos2200 pin-controller - PERIC2 */
+static const struct samsung_pin_bank_data exynos2200_pin_banks7[] __initconst = {
+ EXYNOS850_PIN_BANK_EINTG(4, 0x0, "gpp0", 0x00),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x20, "gpp1", 0x04),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x40, "gpp2", 0x08),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x60, "gpp3", 0x0c),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x80, "gpp5", 0x10),
+ EXYNOS850_PIN_BANK_EINTG(4, 0xa0, "gpp6", 0x14),
+ EXYNOS850_PIN_BANK_EINTG(4, 0xc0, "gpp11", 0x18),
+ EXYNOS850_PIN_BANK_EINTG(2, 0xe0, "gpc3", 0x1c),
+ EXYNOS850_PIN_BANK_EINTG(2, 0x100, "gpc4", 0x20),
+ EXYNOS850_PIN_BANK_EINTG(2, 0x120, "gpc5", 0x24),
+ EXYNOS850_PIN_BANK_EINTG(2, 0x140, "gpc6", 0x28),
+ EXYNOS850_PIN_BANK_EINTG(2, 0x160, "gpc7", 0x2c),
+ EXYNOS850_PIN_BANK_EINTG(2, 0x180, "gpc8", 0x30),
+ EXYNOS850_PIN_BANK_EINTG(2, 0x1a0, "gpc9", 0x34),
+ EXYNOS850_PIN_BANK_EINTG(5, 0x1c0, "gpg0", 0x38),
+};
+
+/* pin banks of exynos2200 pin-controller - VTS */
+static const struct samsung_pin_bank_data exynos2200_pin_banks8[] __initconst = {
+ EXYNOS850_PIN_BANK_EINTG(7, 0x0, "gpv0", 0x00),
+};
+
+static const struct samsung_pin_ctrl exynos2200_pin_ctrl[] = {
+ {
+ /* pin-controller instance 0 ALIVE data */
+ .pin_banks = exynos2200_pin_banks0,
+ .nr_banks = ARRAY_SIZE(exynos2200_pin_banks0),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .eint_wkup_init = exynos_eint_wkup_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ }, {
+ /* pin-controller instance 1 CMGP data */
+ .pin_banks = exynos2200_pin_banks1,
+ .nr_banks = ARRAY_SIZE(exynos2200_pin_banks1),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .eint_wkup_init = exynos_eint_wkup_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ }, {
+ /* pin-controller instance 2 HSI1 data */
+ .pin_banks = exynos2200_pin_banks2,
+ .nr_banks = ARRAY_SIZE(exynos2200_pin_banks2),
+ }, {
+ /* pin-controller instance 3 UFS data */
+ .pin_banks = exynos2200_pin_banks3,
+ .nr_banks = ARRAY_SIZE(exynos2200_pin_banks3),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ }, {
+ /* pin-controller instance 4 HSI1UFS data */
+ .pin_banks = exynos2200_pin_banks4,
+ .nr_banks = ARRAY_SIZE(exynos2200_pin_banks4),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ }, {
+ /* pin-controller instance 5 PERIC0 data */
+ .pin_banks = exynos2200_pin_banks5,
+ .nr_banks = ARRAY_SIZE(exynos2200_pin_banks5),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ }, {
+ /* pin-controller instance 6 PERIC1 data */
+ .pin_banks = exynos2200_pin_banks6,
+ .nr_banks = ARRAY_SIZE(exynos2200_pin_banks6),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ }, {
+ /* pin-controller instance 7 PERIC2 data */
+ .pin_banks = exynos2200_pin_banks7,
+ .nr_banks = ARRAY_SIZE(exynos2200_pin_banks7),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ }, {
+ /* pin-controller instance 8 VTS data */
+ .pin_banks = exynos2200_pin_banks8,
+ .nr_banks = ARRAY_SIZE(exynos2200_pin_banks8),
+ },
+};
+
+const struct samsung_pinctrl_of_match_data exynos2200_of_data __initconst = {
+ .ctrl = exynos2200_pin_ctrl,
+ .num_ctrl = ARRAY_SIZE(exynos2200_pin_ctrl),
+};
+
/* pin banks of exynos5433 pin-controller - ALIVE */
static const struct samsung_pin_bank_data exynos5433_pin_banks0[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index cfced7afd..04a8a23f4 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1469,6 +1469,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
#ifdef CONFIG_PINCTRL_EXYNOS_ARM64
{ .compatible = "google,gs101-pinctrl",
.data = &gs101_of_data },
+ { .compatible = "samsung,exynos2200-pinctrl",
+ .data = &exynos2200_of_data },
{ .compatible = "samsung,exynos5433-pinctrl",
.data = &exynos5433_of_data },
{ .compatible = "samsung,exynos7-pinctrl",
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index bb0689d52..a43803027 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -373,6 +373,7 @@ struct samsung_pmx_func {
};
/* list of all exported SoC specific data */
+extern const struct samsung_pinctrl_of_match_data exynos2200_of_data;
extern const struct samsung_pinctrl_of_match_data exynos3250_of_data;
extern const struct samsung_pinctrl_of_match_data exynos4210_of_data;
extern const struct samsung_pinctrl_of_match_data exynos4x12_of_data;
--
2.43.0
next prev parent reply other threads:[~2025-02-15 11:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-15 11:32 [PATCH v1 0/3] " Ivaylo Ivanov
2025-02-15 11:32 ` [PATCH v1 1/3] dt-bindings: pinctrl: samsung: add exynos2200-wakeup-eint compatible Ivaylo Ivanov
2025-02-19 8:30 ` Krzysztof Kozlowski
2025-02-15 11:32 ` [PATCH v1 2/3] dt-bindings: pinctrl: samsung: add exynos2200 compatible Ivaylo Ivanov
2025-02-19 8:30 ` Krzysztof Kozlowski
2025-02-15 11:32 ` Ivaylo Ivanov [this message]
2025-02-19 11:08 ` [PATCH v1 0/3] pinctrl: samsung: add exynos2200 SoC pinctrl configuration Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250215113248.159386-4-ivo.ivanov.ivanov1@gmail.com \
--to=ivo.ivanov.ivanov1@gmail.com \
--cc=alim.akhtar@samsung.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.nawrocki@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®