mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jiande Lu <jiande.lu@mediatek.com>
To: Marcel Holtmann <marcel@holtmann.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Luiz Von Dentz <luiz.dentz@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>,
	Chris Lu <chris.lu@mediatek.com>,
	Deren Wu <deren.Wu@mediatek.com>,
	Aaron Hou <aaron.hou@mediatek.com>,
	Steve Lee <steve.lee@mediatek.com>,
	linux-bluetooth <linux-bluetooth@vger.kernel.org>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	linux-mediatek <linux-mediatek@lists.infradead.org>,
	Jiande Lu <jiande.lu@mediatek.com>
Subject: [PATCH] Bluetooth: btusb: Add 2 HWIDs for MT7922
Date: Thu, 20 Feb 2025 10:01:28 +0800	[thread overview]
Message-ID: <20250220020129.2400730-1-jiande.lu@mediatek.com> (raw)

Add below HWIDs for MediaTek MT7922 USB Bluetooth chip.
VID 0x0489, PID 0xe152
VID 0x0489, PID 0xe153

Patch has been tested successfully and controller is recognized
device pair successfully.

MT7922 module bring up message as below.
Bluetooth: Core ver 2.22
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
Bluetooth: hci0: Device setup in 2284925 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11

Signed-off-by: Jiande Lu <jiande.lu@mediatek.com>
---
 drivers/bluetooth/btusb.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 1caf7a071a73..6db25b8d6d42 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -667,6 +667,10 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe102), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe152), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe153), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x04ca, 0x3804), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x04ca, 0x38e4), .driver_info = BTUSB_MEDIATEK |
-- 
2.45.2


             reply	other threads:[~2025-02-20  2:01 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-20  2:01 Jiande Lu [this message]
2025-02-20 18:10 ` patchwork-bot+bluetooth
  -- strict thread matches above, loose matches on Subject: below --
2025-02-06  6:11 Jiande Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250220020129.2400730-1-jiande.lu@mediatek.com \
    --to=jiande.lu@mediatek.com \
    --cc=aaron.hou@mediatek.com \
    --cc=chris.lu@mediatek.com \
    --cc=deren.Wu@mediatek.com \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcel@holtmann.org \
    --cc=sean.wang@mediatek.com \
    --cc=steve.lee@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®