From: ChunHao Lin <hau@realtek.com>
To: <hkallweit1@gmail.com>, <nic_swsd@realtek.com>,
<andrew+netdev@lunn.ch>, <davem@davemloft.net>,
<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
ChunHao Lin <hau@realtek.com>
Subject: [PATCH net-next 2/3] r8169: enable RTL8168H/RTL8168EP/RTL8168FP/RTL8125/RTL8126 LTR support
Date: Fri, 21 Feb 2025 15:18:27 +0800 [thread overview]
Message-ID: <20250221071828.12323-441-nic_swsd@realtek.com> (raw)
In-Reply-To: <20250221071828.12323-439-nic_swsd@realtek.com>
This patch will enable RTL8168H/RTL8168EP/RTL8168FP/RTL8125/RTL8126 LTR
support on the platforms that have tested with LTR enabled.
Signed-off-by: ChunHao Lin <hau@realtek.com>
---
drivers/net/ethernet/realtek/r8169_main.c | 108 ++++++++++++++++++++++
1 file changed, 108 insertions(+)
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 731302361989..9953eaa01c9d 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -2955,6 +2955,111 @@ static void rtl_disable_exit_l1(struct rtl8169_private *tp)
}
}
+static void rtl_set_ltr_latency(struct rtl8169_private *tp)
+{
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_70:
+ case RTL_GIGA_MAC_VER_71:
+ r8168_mac_ocp_write(tp, 0xcdd0, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcdd2, 0x8c09);
+ r8168_mac_ocp_write(tp, 0xcdd8, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcdd4, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcdda, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcdd6, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcddc, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcde8, 0x887a);
+ r8168_mac_ocp_write(tp, 0xcdea, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcdec, 0x8c09);
+ r8168_mac_ocp_write(tp, 0xcdee, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcdf0, 0x8a62);
+ r8168_mac_ocp_write(tp, 0xcdf2, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcdf4, 0x883e);
+ r8168_mac_ocp_write(tp, 0xcdf6, 0x9003);
+ break;
+ case RTL_GIGA_MAC_VER_61 ... RTL_GIGA_MAC_VER_66:
+ r8168_mac_ocp_write(tp, 0xcdd0, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcdd2, 0x889c);
+ r8168_mac_ocp_write(tp, 0xcdd8, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcdd4, 0x8c30);
+ r8168_mac_ocp_write(tp, 0xcdda, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcdd6, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcddc, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcde8, 0x883e);
+ r8168_mac_ocp_write(tp, 0xcdea, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcdec, 0x889c);
+ r8168_mac_ocp_write(tp, 0xcdee, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcdf0, 0x8C09);
+ r8168_mac_ocp_write(tp, 0xcdf2, 0x9003);
+ break;
+ case RTL_GIGA_MAC_VER_46 ... RTL_GIGA_MAC_VER_53:
+ r8168_mac_ocp_write(tp, 0xcdd8, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcdda, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcddc, 0x9003);
+ r8168_mac_ocp_write(tp, 0xcdd2, 0x883c);
+ r8168_mac_ocp_write(tp, 0xcdd4, 0x8c12);
+ r8168_mac_ocp_write(tp, 0xcdd6, 0x9003);
+ break;
+ default:
+ break;
+ }
+}
+
+static void rtl_reset_pci_ltr(struct rtl8169_private *tp)
+{
+ struct pci_dev *pdev = tp->pci_dev;
+ u16 cap;
+
+ pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &cap);
+ if (cap & PCI_EXP_DEVCTL2_LTR_EN) {
+ pcie_capability_clear_word(pdev, PCI_EXP_DEVCTL2,
+ PCI_EXP_DEVCTL2_LTR_EN);
+ pcie_capability_set_word(pdev, PCI_EXP_DEVCTL2,
+ PCI_EXP_DEVCTL2_LTR_EN);
+ }
+}
+
+static void rtl_enable_ltr(struct rtl8169_private *tp)
+{
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_61 ... RTL_GIGA_MAC_VER_71:
+ r8168_mac_ocp_modify(tp, 0xe034, 0x0000, 0xc000);
+ r8168_mac_ocp_modify(tp, 0xe0a2, 0x0000, BIT(0));
+ r8168_mac_ocp_modify(tp, 0xe032, 0x0000, BIT(14));
+ break;
+ case RTL_GIGA_MAC_VER_46 ... RTL_GIGA_MAC_VER_48:
+ case RTL_GIGA_MAC_VER_52 ... RTL_GIGA_MAC_VER_53:
+ r8168_mac_ocp_modify(tp, 0xe0a2, 0x0000, BIT(0));
+ RTL_W8(tp, 0xb6, RTL_R8(tp, 0xb6) | BIT(0));
+ fallthrough;
+ case RTL_GIGA_MAC_VER_51:
+ r8168_mac_ocp_modify(tp, 0xe034, 0x0000, 0xc000);
+ r8168_mac_ocp_write(tp, 0xe02c, 0x1880);
+ r8168_mac_ocp_write(tp, 0xe02e, 0x4880);
+ break;
+ default:
+ return;
+ }
+
+ rtl_set_ltr_latency(tp);
+
+ /* chip can trigger LTR */
+ r8168_mac_ocp_modify(tp, 0xe032, 0x0003, BIT(0));
+
+ /* reset LTR to notify host */
+ rtl_reset_pci_ltr(tp);
+}
+
+static void rtl_disable_ltr(struct rtl8169_private *tp)
+{
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_46 ... RTL_GIGA_MAC_VER_71:
+ r8168_mac_ocp_modify(tp, 0xe032, 0x0003, 0);
+ break;
+ default:
+ break;
+ }
+}
+
static void rtl_hw_aspm_clkreq_enable(struct rtl8169_private *tp, bool enable)
{
u8 val8;
@@ -2971,6 +3076,8 @@ static void rtl_hw_aspm_clkreq_enable(struct rtl8169_private *tp, bool enable)
tp->mac_version == RTL_GIGA_MAC_VER_43)
return;
+ rtl_enable_ltr(tp);
+
rtl_mod_config5(tp, 0, ASPM_en);
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_70:
@@ -4821,6 +4928,7 @@ static void rtl8169_down(struct rtl8169_private *tp)
rtl8169_cleanup(tp);
rtl_disable_exit_l1(tp);
+ rtl_disable_ltr(tp);
rtl_prepare_power_down(tp);
if (tp->dash_type != RTL_DASH_NONE)
--
2.43.0
next prev parent reply other threads:[~2025-02-21 7:19 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-21 7:18 [PATCH net-next 0/3] r8169: enable more devices ASPM and " ChunHao Lin
2025-02-21 7:18 ` [PATCH net-next 1/3] r8169: enable RTL8168H/RTL8168EP/RTL8168FP ASPM support ChunHao Lin
2025-02-21 19:29 ` Heiner Kallweit
2025-02-21 7:18 ` ChunHao Lin [this message]
2025-02-21 19:39 ` [PATCH net-next 2/3] r8169: enable RTL8168H/RTL8168EP/RTL8168FP/RTL8125/RTL8126 LTR support Heiner Kallweit
2025-02-24 16:33 ` Hau
2025-02-24 19:00 ` Bjorn Helgaas
2025-02-28 22:58 ` Heiner Kallweit
2025-03-06 16:51 ` Hau
2025-03-01 15:02 ` Heiner Kallweit
2025-02-21 7:18 ` [PATCH net-next 3/3] r8169: disable RTL8126 ZRX-DC timeout ChunHao Lin
2025-02-21 20:01 ` Heiner Kallweit
2025-02-24 16:09 ` Hau
2025-02-21 20:01 ` Bjorn Helgaas
2025-02-21 20:12 ` Heiner Kallweit
2025-02-21 20:35 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250221071828.12323-441-nic_swsd@realtek.com \
--to=hau@realtek.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®