From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net, Andrew Lunn <andrew@lunn.ch>,
Jakub Kicinski <kuba@kernel.org>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>,
Russell King <linux@armlinux.org.uk>,
Heiner Kallweit <hkallweit1@gmail.com>
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
thomas.petazzoni@bootlin.com,
linux-arm-kernel@lists.infradead.org,
"Christophe Leroy" <christophe.leroy@csgroup.eu>,
"Herve Codina" <herve.codina@bootlin.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Vladimir Oltean" <vladimir.oltean@nxp.com>,
"Köry Maincent" <kory.maincent@bootlin.com>,
"Oleksij Rempel" <o.rempel@pengutronix.de>,
"Simon Horman" <horms@kernel.org>,
"Romain Gantois" <romain.gantois@bootlin.com>
Subject: [PATCH net-next 03/13] net: phy: phylink: Extract getting the max speed for a given interface
Date: Sat, 22 Feb 2025 15:27:15 +0100 [thread overview]
Message-ID: <20250222142727.894124-4-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20250222142727.894124-1-maxime.chevallier@bootlin.com>
Make the phylink helper 'phylink_interface_max_speed' part of the
phy_caps helper set, making phy_interface_t parameter handling
accessible for other uses.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
drivers/net/phy/phy-caps.h | 1 +
drivers/net/phy/phy_caps.c | 72 +++++++++++++++++++++++++++++++++++
drivers/net/phy/phylink.c | 77 ++------------------------------------
3 files changed, 76 insertions(+), 74 deletions(-)
diff --git a/drivers/net/phy/phy-caps.h b/drivers/net/phy/phy-caps.h
index ecb63b28c5fb..9580754fff1f 100644
--- a/drivers/net/phy/phy-caps.h
+++ b/drivers/net/phy/phy-caps.h
@@ -10,5 +10,6 @@
void linkmode_from_caps(unsigned long *linkmode, unsigned long caps);
unsigned long phy_interface_caps(phy_interface_t interface);
+int phy_interface_max_speed(phy_interface_t interface);
#endif /* __PHY_CAPS_H */
diff --git a/drivers/net/phy/phy_caps.c b/drivers/net/phy/phy_caps.c
index 59e4505b7336..cf68a2829bde 100644
--- a/drivers/net/phy/phy_caps.c
+++ b/drivers/net/phy/phy_caps.c
@@ -251,3 +251,75 @@ unsigned long phy_interface_caps(phy_interface_t interface)
return caps;
}
EXPORT_SYMBOL_GPL(phy_interface_caps);
+
+/**
+ * phy_interface_max_speed() - get the maximum speed of a phy interface
+ * @interface: phy interface mode defined by &typedef phy_interface_t
+ *
+ * Determine the maximum speed of a phy interface. This is intended to help
+ * determine the correct speed to pass to the MAC when the phy is performing
+ * rate matching.
+ *
+ * Return: The maximum speed of @interface
+ */
+int phy_interface_max_speed(phy_interface_t interface)
+{
+ switch (interface) {
+ case PHY_INTERFACE_MODE_100BASEX:
+ case PHY_INTERFACE_MODE_REVRMII:
+ case PHY_INTERFACE_MODE_RMII:
+ case PHY_INTERFACE_MODE_SMII:
+ case PHY_INTERFACE_MODE_REVMII:
+ case PHY_INTERFACE_MODE_MII:
+ return SPEED_100;
+
+ case PHY_INTERFACE_MODE_TBI:
+ case PHY_INTERFACE_MODE_MOCA:
+ case PHY_INTERFACE_MODE_RTBI:
+ case PHY_INTERFACE_MODE_1000BASEX:
+ case PHY_INTERFACE_MODE_1000BASEKX:
+ case PHY_INTERFACE_MODE_TRGMII:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_PSGMII:
+ case PHY_INTERFACE_MODE_QSGMII:
+ case PHY_INTERFACE_MODE_QUSGMII:
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_GMII:
+ return SPEED_1000;
+
+ case PHY_INTERFACE_MODE_2500BASEX:
+ case PHY_INTERFACE_MODE_10G_QXGMII:
+ return SPEED_2500;
+
+ case PHY_INTERFACE_MODE_5GBASER:
+ return SPEED_5000;
+
+ case PHY_INTERFACE_MODE_XGMII:
+ case PHY_INTERFACE_MODE_RXAUI:
+ case PHY_INTERFACE_MODE_XAUI:
+ case PHY_INTERFACE_MODE_10GBASER:
+ case PHY_INTERFACE_MODE_10GKR:
+ case PHY_INTERFACE_MODE_USXGMII:
+ return SPEED_10000;
+
+ case PHY_INTERFACE_MODE_25GBASER:
+ return SPEED_25000;
+
+ case PHY_INTERFACE_MODE_XLGMII:
+ return SPEED_40000;
+
+ case PHY_INTERFACE_MODE_INTERNAL:
+ case PHY_INTERFACE_MODE_NA:
+ case PHY_INTERFACE_MODE_MAX:
+ /* No idea! Garbage in, unknown out */
+ return SPEED_UNKNOWN;
+ }
+
+ /* If we get here, someone forgot to add an interface mode above */
+ WARN_ON_ONCE(1);
+ return SPEED_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(phy_interface_max_speed);
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index c05c0921c5d0..af04be1d23c5 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -221,77 +221,6 @@ static unsigned int phylink_interface_signal_rate(phy_interface_t interface)
}
}
-/**
- * phylink_interface_max_speed() - get the maximum speed of a phy interface
- * @interface: phy interface mode defined by &typedef phy_interface_t
- *
- * Determine the maximum speed of a phy interface. This is intended to help
- * determine the correct speed to pass to the MAC when the phy is performing
- * rate matching.
- *
- * Return: The maximum speed of @interface
- */
-static int phylink_interface_max_speed(phy_interface_t interface)
-{
- switch (interface) {
- case PHY_INTERFACE_MODE_100BASEX:
- case PHY_INTERFACE_MODE_REVRMII:
- case PHY_INTERFACE_MODE_RMII:
- case PHY_INTERFACE_MODE_SMII:
- case PHY_INTERFACE_MODE_REVMII:
- case PHY_INTERFACE_MODE_MII:
- return SPEED_100;
-
- case PHY_INTERFACE_MODE_TBI:
- case PHY_INTERFACE_MODE_MOCA:
- case PHY_INTERFACE_MODE_RTBI:
- case PHY_INTERFACE_MODE_1000BASEX:
- case PHY_INTERFACE_MODE_1000BASEKX:
- case PHY_INTERFACE_MODE_TRGMII:
- case PHY_INTERFACE_MODE_RGMII_TXID:
- case PHY_INTERFACE_MODE_RGMII_RXID:
- case PHY_INTERFACE_MODE_RGMII_ID:
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_PSGMII:
- case PHY_INTERFACE_MODE_QSGMII:
- case PHY_INTERFACE_MODE_QUSGMII:
- case PHY_INTERFACE_MODE_SGMII:
- case PHY_INTERFACE_MODE_GMII:
- return SPEED_1000;
-
- case PHY_INTERFACE_MODE_2500BASEX:
- case PHY_INTERFACE_MODE_10G_QXGMII:
- return SPEED_2500;
-
- case PHY_INTERFACE_MODE_5GBASER:
- return SPEED_5000;
-
- case PHY_INTERFACE_MODE_XGMII:
- case PHY_INTERFACE_MODE_RXAUI:
- case PHY_INTERFACE_MODE_XAUI:
- case PHY_INTERFACE_MODE_10GBASER:
- case PHY_INTERFACE_MODE_10GKR:
- case PHY_INTERFACE_MODE_USXGMII:
- return SPEED_10000;
-
- case PHY_INTERFACE_MODE_25GBASER:
- return SPEED_25000;
-
- case PHY_INTERFACE_MODE_XLGMII:
- return SPEED_40000;
-
- case PHY_INTERFACE_MODE_INTERNAL:
- case PHY_INTERFACE_MODE_NA:
- case PHY_INTERFACE_MODE_MAX:
- /* No idea! Garbage in, unknown out */
- return SPEED_UNKNOWN;
- }
-
- /* If we get here, someone forgot to add an interface mode above */
- WARN_ON_ONCE(1);
- return SPEED_UNKNOWN;
-}
-
static struct {
unsigned long mask;
int speed;
@@ -371,7 +300,7 @@ static unsigned long phylink_get_capabilities(phy_interface_t interface,
unsigned long mac_capabilities,
int rate_matching)
{
- int max_speed = phylink_interface_max_speed(interface);
+ int max_speed = phy_interface_max_speed(interface);
unsigned long caps = phy_interface_caps(interface);
unsigned long matched_caps = 0;
@@ -1418,7 +1347,7 @@ static void phylink_link_up(struct phylink *pl,
* the link_state) to the interface speed, and will send
* pause frames to the MAC to limit its transmission speed.
*/
- speed = phylink_interface_max_speed(link_state.interface);
+ speed = phy_interface_max_speed(link_state.interface);
duplex = DUPLEX_FULL;
rx_pause = true;
break;
@@ -1428,7 +1357,7 @@ static void phylink_link_up(struct phylink *pl,
* the link_state) to the interface speed, and will cause
* collisions to the MAC to limit its transmission speed.
*/
- speed = phylink_interface_max_speed(link_state.interface);
+ speed = phy_interface_max_speed(link_state.interface);
duplex = DUPLEX_HALF;
break;
}
--
2.48.1
next prev parent reply other threads:[~2025-02-22 14:27 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-22 14:27 [PATCH net-next 00/13] net: phy: Rework linkmodes handling in a dedicated file Maxime Chevallier
2025-02-22 14:27 ` [PATCH net-next 01/13] net: phy: Extract the speed/duplex to linkmode conversion from phylink Maxime Chevallier
2025-02-24 14:01 ` Russell King (Oracle)
2025-02-24 14:13 ` Maxime Chevallier
2025-02-22 14:27 ` [PATCH net-next 02/13] net: phy: phylink: Extract the logic to get caps from interface Maxime Chevallier
2025-02-22 14:27 ` Maxime Chevallier [this message]
2025-02-22 14:27 ` [PATCH net-next 04/13] net: ethtool: Export the link_mode_params definitions Maxime Chevallier
2025-02-22 14:27 ` [PATCH net-next 05/13] net: phy: Use an internal, searchable storage for the linkmodes Maxime Chevallier
2025-02-24 13:33 ` Kory Maincent
2025-02-22 14:27 ` [PATCH net-next 06/13] net: phy: phy_caps: Move phy_speeds to phy_caps Maxime Chevallier
2025-02-22 14:27 ` [PATCH net-next 07/13] net: phy: phy_caps: Move __set_linkmode_max_speed " Maxime Chevallier
2025-02-22 14:27 ` [PATCH net-next 08/13] net: phy: phy_caps: Introduce link_caps_valid Maxime Chevallier
2025-02-23 6:38 ` kernel test robot
2025-02-23 13:40 ` Maxime Chevallier
2025-02-22 14:27 ` [PATCH net-next 09/13] net: phy: phy_caps: Implement link_capabilities lookup by linkmode Maxime Chevallier
2025-02-22 14:27 ` [PATCH net-next 10/13] net: phy: phy_caps: Allow looking-up link caps based on speed and duplex Maxime Chevallier
2025-02-22 14:27 ` [PATCH net-next 11/13] net: phy: phy_device: Use link_capabilities lookup for PHY aneg config Maxime Chevallier
2025-02-22 14:27 ` [PATCH net-next 12/13] net: phy: phylink: Use phy_caps_lookup for fixed-link configuration Maxime Chevallier
2025-02-24 13:44 ` Kory Maincent
2025-02-24 13:53 ` Russell King (Oracle)
2025-02-24 14:04 ` Kory Maincent
2025-02-25 14:17 ` Maxime Chevallier
2025-02-22 14:27 ` [PATCH net-next 13/13] net: phy: drop phy_settings and the associated lookup helpers Maxime Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250222142727.894124-4-maxime.chevallier@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=andrew@lunn.ch \
--cc=christophe.leroy@csgroup.eu \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=herve.codina@bootlin.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=romain.gantois@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®