From: Richard Leitner <richard.leitner@linux.dev>
To: Sakari Ailus <sakari.ailus@linux.intel.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
Richard Leitner <richard.leitner@linux.dev>
Subject: [PATCH 3/3] media: i2c: ov9282: fix analogue gain maximum
Date: Tue, 25 Feb 2025 14:08:42 +0100 [thread overview]
Message-ID: <20250225-b4-ov9282-gain-v1-3-a24af2820dde@linux.dev> (raw)
In-Reply-To: <20250225-b4-ov9282-gain-v1-0-a24af2820dde@linux.dev>
The sensors analogue gain is stored within two "LONG GAIN" registers
(0x3508 and 0x3509) where the first one holds the upper 5 bits of the
value. The second register (0x3509) holds the lower 4 bits of the gain
value in its upper 4 bits. The lower 4 register bits are fraction bits.
This patch changes the gain control to adhere to the datasheet and
make the "upper gain register" (0x3508) accessible via the gain control,
resulting in a new maximum of 0x1fff instead of 0xff.
As the "upper gain register" is now written during exposure/gain update
remove the hard-coded 0x00 write to it from common_regs.
We cover only the "real gain format" use-case. The "sensor gain
format" one is ignored as based on the hard-coded "AEC MANUAL" register
configuration it is disabled.
All values are based on the OV9281 datasheet v1.01 (09.18.2015).
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
---
drivers/media/i2c/ov9282.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
index c882a021cf18852237bf9b9524d3de0c5b48cbcb..e6effb2b42d4d5d0ca3d924df59c60512f9ce65d 100644
--- a/drivers/media/i2c/ov9282.c
+++ b/drivers/media/i2c/ov9282.c
@@ -54,11 +54,11 @@
#define OV9282_AEC_MANUAL_DEFAULT 0x00
/* Analog gain control */
-#define OV9282_REG_AGAIN 0x3509
-#define OV9282_AGAIN_MIN 0x10
-#define OV9282_AGAIN_MAX 0xff
-#define OV9282_AGAIN_STEP 1
-#define OV9282_AGAIN_DEFAULT 0x10
+#define OV9282_REG_AGAIN 0x3508
+#define OV9282_AGAIN_MIN 0x0010
+#define OV9282_AGAIN_MAX 0x1fff
+#define OV9282_AGAIN_STEP 0x0001
+#define OV9282_AGAIN_DEFAULT 0x0010
/* Group hold register */
#define OV9282_REG_HOLD 0x3308
@@ -226,7 +226,6 @@ static const struct ov9282_reg common_regs[] = {
{OV9282_REG_AEC_MANUAL, OV9282_GAIN_PREC16_EN},
{0x3505, 0x8c},
{0x3507, 0x03},
- {0x3508, 0x00},
{0x3610, 0x80},
{0x3611, 0xa0},
{0x3620, 0x6e},
@@ -605,7 +604,11 @@ static int ov9282_update_exp_gain(struct ov9282 *ov9282, u32 exposure, u32 gain)
if (ret)
goto error_release_group_hold;
- ret = ov9282_write_reg(ov9282, OV9282_REG_AGAIN, 1, gain);
+ ret = ov9282_write_reg(ov9282, OV9282_REG_AGAIN, 1, (gain >> 8) & 0x1f);
+ if (ret)
+ goto error_release_group_hold;
+
+ ret = ov9282_write_reg(ov9282, OV9282_REG_AGAIN + 1, 1, gain & 0xff);
error_release_group_hold:
ov9282_write_reg(ov9282, OV9282_REG_HOLD, 1, 0);
--
2.47.2
next prev parent reply other threads:[~2025-02-25 13:09 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-25 13:08 [PATCH 0/3] Fix analogue gain maximum for ov9282 Richard Leitner
2025-02-25 13:08 ` [PATCH 1/3] media: i2c: ov9282: use register definitions Richard Leitner
2025-02-25 14:19 ` Dave Stevenson
2025-02-25 13:08 ` [PATCH 2/3] media: i2c: ov9282: add AEC Manual register definition Richard Leitner
2025-02-25 14:20 ` Dave Stevenson
2025-02-25 13:08 ` Richard Leitner [this message]
2025-02-25 15:30 ` [PATCH 3/3] media: i2c: ov9282: fix analogue gain maximum Dave Stevenson
2025-02-25 15:46 ` Laurent Pinchart
2025-02-26 11:10 ` Richard Leitner
2025-02-26 11:07 ` Richard Leitner
2025-02-26 12:52 ` Dave Stevenson
2025-02-26 13:01 ` Sakari Ailus
2025-02-26 13:22 ` Richard Leitner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250225-b4-ov9282-gain-v1-3-a24af2820dde@linux.dev \
--to=richard.leitner@linux.dev \
--cc=dave.stevenson@raspberrypi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®