[PATCH 1/5] arm64: dts: ti: k3-am62x-phyboard-lyra: Add boot phase tags

[Wadim Egorov <w.egorov@phytec.de>]

The bootph-all and bootph-pre-ram tags were introduced in dt-schema
(dtschema/schemas/bootph.yaml) to define node usage across different
boot phases.

Add boot phase tags to all required nodes to ensure boot support from
all sources, including UART, USB (DFU), Ethernet, uSD card, eMMC, and
OSPI NOR Flash.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
 arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi    | 12 ++++++++++++
 arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi |  9 +++++++++
 2 files changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
index 2ef4cbaec789..8b845bf9eda1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -29,6 +29,7 @@ aliases {
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+		bootph-all;
 	};
 
 	reserved_memory: reserved-memory {
@@ -131,6 +132,7 @@ main_i2c0_pins_default: main-i2c0-default-pins {
 			AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
 			AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
 		>;
+		bootph-all;
 	};
 
 	main_mdio1_pins_default: main-mdio1-default-pins {
@@ -138,6 +140,7 @@ main_mdio1_pins_default: main-mdio1-default-pins {
 			AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
 			AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	main_mmc0_pins_default: main-mmc0-default-pins {
@@ -153,6 +156,7 @@ AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
 			AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
 			AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
 		>;
+		bootph-all;
 	};
 
 	main_rgmii1_pins_default: main-rgmii1-default-pins {
@@ -170,6 +174,7 @@ AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
 			AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
 			AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
 		>;
+		bootph-all;
 	};
 
 	ospi0_pins_default: ospi0-default-pins {
@@ -186,6 +191,7 @@ AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
 			AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
 			AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
 		>;
+		bootph-all;
 	};
 
 	pmic_irq_pins_default: pmic-irq-default-pins {
@@ -205,11 +211,13 @@ opp-1400000000 {
 &cpsw3g {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_rgmii1_pins_default>;
+	bootph-all;
 };
 
 &cpsw_port1 {
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy1>;
+	bootph-all;
 };
 
 &cpsw3g_mdio {
@@ -220,6 +228,7 @@ &cpsw3g_mdio {
 	cpsw3g_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		bootph-all;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 	};
@@ -236,6 +245,7 @@ &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
+	bootph-all;
 	status = "okay";
 
 	pmic@30 {
@@ -355,6 +365,7 @@ serial_flash: flash@0 {
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <0>;
+		bootph-all;
 	};
 };
 
@@ -363,5 +374,6 @@ &sdhci0 {
 	pinctrl-0 = <&main_mmc0_pins_default>;
 	disable-wp;
 	non-removable;
+	bootph-all;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
index 922cad14c9f8..aab74d6019b0 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
@@ -138,6 +138,7 @@ vcc_3v3_mmc: regulator-vcc-3v3-mmc {
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 		regulator-boot-on;
+		bootph-all;
 	};
 
 	vcc_3v3_sw: regulator-vcc-3v3-sw {
@@ -233,6 +234,7 @@ AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */
 			AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */
 			AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */
 		>;
+		bootph-all;
 	};
 
 	main_rgmii2_pins_default: main-rgmii2-default-pins {
@@ -257,6 +259,7 @@ main_uart0_pins_default: main-uart0-default-pins {
 			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
 			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
 		>;
+		bootph-all;
 	};
 
 	main_uart1_pins_default: main-uart1-default-pins {
@@ -266,6 +269,7 @@ AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */
 			AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */
 			AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */
 		>;
+		bootph-pre-ram;
 	};
 
 	main_usb1_pins_default: main-usb1-default-pins {
@@ -430,12 +434,14 @@ &main_mcan0 {
 &main_uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
+	bootph-all;
 	status = "okay";
 };
 
 &main_uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart1_pins_default>;
+	bootph-pre-ram;
 	/* Main UART1 may be used by TIFS firmware */
 	status = "okay";
 };
@@ -467,11 +473,13 @@ &sdhci1 {
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	disable-wp;
 	no-1-8-v;
+	bootph-all;
 	status = "okay";
 };
 
 &usbss0 {
 	ti,vbus-divider;
+	bootph-all;
 	status = "okay";
 };
 
@@ -482,6 +490,7 @@ &usbss1 {
 
 &usb0 {
 	usb-role-switch;
+	bootph-all;
 
 	port {
 		typec_hs: endpoint {
-- 
2.34.1