From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net, Andrew Lunn <andrew@lunn.ch>,
Jakub Kicinski <kuba@kernel.org>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>,
Russell King <linux@armlinux.org.uk>,
Heiner Kallweit <hkallweit1@gmail.com>
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
thomas.petazzoni@bootlin.com,
linux-arm-kernel@lists.infradead.org,
"Christophe Leroy" <christophe.leroy@csgroup.eu>,
"Herve Codina" <herve.codina@bootlin.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Vladimir Oltean" <vladimir.oltean@nxp.com>,
"Köry Maincent" <kory.maincent@bootlin.com>,
"Oleksij Rempel" <o.rempel@pengutronix.de>,
"Simon Horman" <horms@kernel.org>,
"Romain Gantois" <romain.gantois@bootlin.com>
Subject: [PATCH net-next v4 09/13] net: phylink: Use phy_caps_lookup for fixed-link configuration
Date: Mon, 3 Mar 2025 10:03:15 +0100 [thread overview]
Message-ID: <20250303090321.805785-10-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20250303090321.805785-1-maxime.chevallier@bootlin.com>
When phylink creates a fixed-link configuration, it finds a matching
linkmode to set as the advertised, lp_advertising and supported modes
based on the speed and duplex of the fixed link.
Use the newly introduced phy_caps_lookup to get these modes instead of
phy_lookup_settings(). This has the side effect that the matched
settings and configured linkmodes may now contain several linkmodes (the
intersection of supported linkmodes from the phylink settings and the
linkmodes that match speed/duplex) instead of the one from
phy_lookup_settings().
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
V4: Remove unnecessary linklmode_zero in phylink_set_fixed_link(),
follwing Russell's comment
drivers/net/phy/phylink.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 6c67d5c9b787..0b9585cb508e 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -805,9 +805,10 @@ static int phylink_validate(struct phylink *pl, unsigned long *supported,
static int phylink_parse_fixedlink(struct phylink *pl,
const struct fwnode_handle *fwnode)
{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(match) = { 0, };
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+ const struct link_capabilities *c;
struct fwnode_handle *fixed_node;
- const struct phy_setting *s;
struct gpio_desc *desc;
u32 speed;
int ret;
@@ -879,8 +880,10 @@ static int phylink_parse_fixedlink(struct phylink *pl,
linkmode_copy(pl->link_config.advertising, pl->supported);
phylink_validate(pl, pl->supported, &pl->link_config);
- s = phy_lookup_setting(pl->link_config.speed, pl->link_config.duplex,
- pl->supported, true);
+ c = phy_caps_lookup(pl->link_config.speed, pl->link_config.duplex,
+ pl->supported, true);
+ if (c)
+ linkmode_and(match, pl->supported, c->linkmodes);
linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, mask);
linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, mask);
@@ -889,9 +892,10 @@ static int phylink_parse_fixedlink(struct phylink *pl,
phylink_set(pl->supported, MII);
- if (s) {
- __set_bit(s->bit, pl->supported);
- __set_bit(s->bit, pl->link_config.lp_advertising);
+ if (c) {
+ linkmode_or(pl->supported, pl->supported, match);
+ linkmode_or(pl->link_config.lp_advertising,
+ pl->link_config.lp_advertising, match);
} else {
phylink_warn(pl, "fixed link %s duplex %dMbps not recognised\n",
pl->link_config.duplex == DUPLEX_FULL ? "full" : "half",
@@ -1879,21 +1883,20 @@ static int phylink_register_sfp(struct phylink *pl,
int phylink_set_fixed_link(struct phylink *pl,
const struct phylink_link_state *state)
{
- const struct phy_setting *s;
+ const struct link_capabilities *c;
unsigned long *adv;
if (pl->cfg_link_an_mode != MLO_AN_PHY || !state ||
!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state))
return -EINVAL;
- s = phy_lookup_setting(state->speed, state->duplex,
- pl->supported, true);
- if (!s)
+ c = phy_caps_lookup(state->speed, state->duplex,
+ pl->supported, true);
+ if (!c)
return -EINVAL;
adv = pl->link_config.advertising;
- linkmode_zero(adv);
- linkmode_set_bit(s->bit, adv);
+ linkmode_and(adv, pl->supported, c->linkmodes);
linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, adv);
pl->link_config.speed = state->speed;
--
2.48.1
next prev parent reply other threads:[~2025-03-03 9:03 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-03 9:03 [PATCH net-next v4 00/13] net: phy: Rework linkmodes handling in a dedicated file Maxime Chevallier
2025-03-03 9:03 ` [PATCH net-next v4 01/13] net: ethtool: Export the link_mode_params definitions Maxime Chevallier
2025-03-03 9:03 ` [PATCH net-next v4 02/13] net: phy: Use an internal, searchable storage for the linkmodes Maxime Chevallier
2025-03-06 8:30 ` Paolo Abeni
2025-03-06 8:57 ` Maxime Chevallier
2025-03-06 10:47 ` Paolo Abeni
2025-03-03 9:03 ` [PATCH net-next v4 03/13] net: phy: phy_caps: Move phy_speeds to phy_caps Maxime Chevallier
2025-03-03 9:03 ` [PATCH net-next v4 04/13] net: phy: phy_caps: Move __set_linkmode_max_speed " Maxime Chevallier
2025-03-03 9:03 ` [PATCH net-next v4 05/13] net: phy: phy_caps: Introduce phy_caps_valid Maxime Chevallier
2025-03-03 9:03 ` [PATCH net-next v4 06/13] net: phy: phy_caps: Implement link_capabilities lookup by linkmode Maxime Chevallier
2025-03-03 9:03 ` [PATCH net-next v4 07/13] net: phy: phy_caps: Allow looking-up link caps based on speed and duplex Maxime Chevallier
2025-03-03 9:03 ` [PATCH net-next v4 08/13] net: phy: phy_device: Use link_capabilities lookup for PHY aneg config Maxime Chevallier
2025-03-03 9:03 ` Maxime Chevallier [this message]
2025-03-04 14:43 ` [PATCH net-next v4 09/13] net: phylink: Use phy_caps_lookup for fixed-link configuration Maxime Chevallier
2025-03-06 12:48 ` Russell King (Oracle)
2025-03-06 8:56 ` Paolo Abeni
2025-03-06 10:12 ` Maxime Chevallier
2025-03-06 12:51 ` Russell King (Oracle)
2025-03-06 13:26 ` Maxime Chevallier
2025-03-03 9:03 ` [PATCH net-next v4 10/13] net: phy: drop phy_settings and the associated lookup helpers Maxime Chevallier
2025-03-03 9:03 ` [PATCH net-next v4 11/13] net: phylink: Add a mapping between MAC_CAPS and LINK_CAPS Maxime Chevallier
2025-03-03 9:03 ` [PATCH net-next v4 12/13] net: phylink: Convert capabilities to linkmodes using phy_caps Maxime Chevallier
2025-03-03 9:03 ` [PATCH net-next v4 13/13] net: phy: phy_caps: Allow getting an phy_interface's capabilities Maxime Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250303090321.805785-10-maxime.chevallier@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=andrew@lunn.ch \
--cc=christophe.leroy@csgroup.eu \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=herve.codina@bootlin.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=romain.gantois@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®