From: Matthew Gerlach <matthew.gerlach@altera.com>
To: dinguyen@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Matthew Gerlach <matthew.gerlach@altera.com>
Subject: [PATCH 2/2] arm64: dts: socfpga: add Agilex7 M-Series SoCDK
Date: Wed, 5 Mar 2025 11:49:51 -0800 [thread overview]
Message-ID: <20250305194951.7226-3-matthew.gerlach@altera.com> (raw)
In-Reply-To: <20250305194951.7226-1-matthew.gerlach@altera.com>
Add device tree for an Intel Agilex7 M-Series SoC Development Kit.
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
---
arch/arm64/boot/dts/intel/Makefile | 1 +
.../boot/dts/intel/socfpga_agilex7m_socdk.dts | 108 ++++++++++++++++++
2 files changed, 109 insertions(+)
create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex7m_socdk.dts
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index d39cfb723f5b..5eeaab890d9f 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -3,5 +3,6 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
socfpga_agilex_socdk.dtb \
socfpga_agilex_socdk_nand.dtb \
socfpga_agilex5_socdk.dtb \
+ socfpga_agilex7m_socdk.dtb \
socfpga_n5x_socdk.dtb
dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex7m_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex7m_socdk.dts
new file mode 100644
index 000000000000..6e970e916342
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex7m_socdk.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025, Altera Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+ model = "SoCFPGA Agilex7 M-Series SoCDK";
+ compatible = "intel,socfpga-agilex7m-socdk", "intel,socfpga-agilex7";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led0 {
+ label = "hps_led0";
+ gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ led1 {
+ label = "hps_led1";
+ gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ led2 {
+ label = "hps_led2";
+ gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0x80000000 0 0>;
+ };
+};
+
+&clkmgr {
+ clocks = <&osc1>;
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ max-frame-size = <9000>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <4>;
+
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <900>; /* 0ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&mmc {
+ status = "okay";
+ cap-sd-highspeed;
+ broken-cd;
+ bus-width = <4>;
+ clk-phase-sd-hs = <0>, <135>;
+};
+
+&osc1 {
+ clock-frequency = <25000000>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ disable-over-current;
+};
+
+&watchdog0 {
+ status = "okay";
+};
--
2.35.3
next prev parent reply other threads:[~2025-03-05 19:50 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-05 19:49 [PATCH 0/2] Add bindings and DTS for the " Matthew Gerlach
2025-03-05 19:49 ` [PATCH 1/2] dt-bindings: intel: document " Matthew Gerlach
2025-03-06 7:44 ` Krzysztof Kozlowski
2025-03-05 19:49 ` Matthew Gerlach [this message]
2025-03-05 22:23 ` [PATCH 0/2] Add bindings and DTS for the " Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250305194951.7226-3-matthew.gerlach@altera.com \
--to=matthew.gerlach@altera.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®