mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
To: marcel@holtmann.org, luiz.dentz@gmail.com
Cc: linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org,
	amitkumar.karwar@nxp.com, neeraj.sanjaykale@nxp.com
Subject: [PATCH v2 3/3] Bluetooth: btnxpuart: Fix kernel panic during FW release
Date: Thu,  6 Mar 2025 23:39:31 +0530	[thread overview]
Message-ID: <20250306180931.57705-3-neeraj.sanjaykale@nxp.com> (raw)
In-Reply-To: <20250306180931.57705-1-neeraj.sanjaykale@nxp.com>

This fixes a kernel panic seen during release FW in a stress test
scenario where WLAN and BT FW download occurs simultaneously, and due to
a HW bug, chip sends out only 1 bootloader signatures.

When driver receives the bootloader signature, it enters FW download
mode, but since no consequtive bootloader signatures seen, FW file is
not requested.

After 60 seconds, when FW download times out, release_firmware causes a
kernel panic.

[ 2601.949184] Unable to handle kernel paging request at virtual address 0000312e6f006573
[ 2601.992076] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111802000
[ 2601.992080] [0000312e6f006573] pgd=0000000000000000, p4d=0000000000000000
[ 2601.992087] Internal error: Oops: 0000000096000021 [#1] PREEMPT SMP
[ 2601.992091] Modules linked in: algif_hash algif_skcipher af_alg btnxpuart(O) pciexxx(O) mlan(O) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce snd_soc_fsl_easrc snd_soc_fsl_asoc_card imx8_media_dev(C) snd_soc_fsl_micfil polyval_generic snd_soc_fsl_xcvr snd_soc_fsl_sai snd_soc_imx_audmux snd_soc_fsl_asrc snd_soc_imx_card snd_soc_imx_hdmi snd_soc_fsl_aud2htx snd_soc_fsl_utils imx_pcm_dma dw_hdmi_cec flexcan can_dev
[ 2602.001825] CPU: 2 PID: 20060 Comm: hciconfig Tainted: G         C O       6.6.23-lts-next-06236-gb586a521770e #1
[ 2602.010182] Hardware name: NXP i.MX8MPlus EVK board (DT)
[ 2602.010185] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2602.010191] pc : _raw_spin_lock+0x34/0x68
[ 2602.010201] lr : free_fw_priv+0x20/0xfc
[ 2602.020561] sp : ffff800089363b30
[ 2602.020563] x29: ffff800089363b30 x28: ffff0000d0eb5880 x27: 0000000000000000
[ 2602.020570] x26: 0000000000000000 x25: ffff0000d728b330 x24: 0000000000000000
[ 2602.020577] x23: ffff0000dc856f38
[ 2602.033797] x22: ffff800089363b70 x21: ffff0000dc856000
[ 2602.033802] x20: ff00312e6f006573 x19: ffff0000d0d9ea80 x18: 0000000000000000
[ 2602.033809] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaad80dd480
[ 2602.083320] x14: 0000000000000000 x13: 00000000000001b9 x12: 0000000000000002
[ 2602.083326] x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff800089363a30
[ 2602.083333] x8 : ffff0001793d75c0 x7 : ffff0000d6dbc400 x6 : 0000000000000000
[ 2602.083339] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : 0000000000000001
[ 2602.083346] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ff00312e6f006573
[ 2602.083354] Call trace:
[ 2602.083356]  _raw_spin_lock+0x34/0x68
[ 2602.083364]  release_firmware+0x48/0x6c
[ 2602.083370]  nxp_setup+0x3c4/0x540 [btnxpuart]
[ 2602.083383]  hci_dev_open_sync+0xf0/0xa34
[ 2602.083391]  hci_dev_open+0xd8/0x178
[ 2602.083399]  hci_sock_ioctl+0x3b0/0x590
[ 2602.083405]  sock_do_ioctl+0x60/0x118
[ 2602.083413]  sock_ioctl+0x2f4/0x374
[ 2602.091430]  __arm64_sys_ioctl+0xac/0xf0
[ 2602.091437]  invoke_syscall+0x48/0x110
[ 2602.091445]  el0_svc_common.constprop.0+0xc0/0xe0
[ 2602.091452]  do_el0_svc+0x1c/0x28
[ 2602.091457]  el0_svc+0x40/0xe4
[ 2602.091465]  el0t_64_sync_handler+0x120/0x12c
[ 2602.091470]  el0t_64_sync+0x190/0x194

Fixes: e3c4891098c8 ("Bluetooth: btnxpuart: Handle FW Download Abort scenario")
Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
---
 drivers/bluetooth/btnxpuart.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index a47181298e81..2869da5d1e1f 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -681,8 +681,10 @@ static int nxp_download_firmware(struct hci_dev *hdev)
 							 &nxpdev->tx_state),
 					       msecs_to_jiffies(60000));
 
-	release_firmware(nxpdev->fw);
-	memset(nxpdev->fw_name, 0, sizeof(nxpdev->fw_name));
+	if (nxpdev->fw && strlen(nxpdev->fw_name)) {
+		release_firmware(nxpdev->fw);
+		memset(nxpdev->fw_name, 0, sizeof(nxpdev->fw_name));
+	}
 
 	if (err == 0) {
 		bt_dev_err(hdev, "FW Download Timeout. offset: %d",
-- 
2.25.1


      parent reply	other threads:[~2025-03-06 18:07 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-06 18:09 [PATCH v2 1/3] Bluetooth: btnxpuart: Add correct bootloader error codes Neeraj Sanjay Kale
2025-03-06 18:09 ` [PATCH v2 2/3] Bluetooth: btnxpuart: Handle bootloader error during cmd5 and cmd7 Neeraj Sanjay Kale
2025-03-09 11:16   ` kernel test robot
2025-03-06 18:09 ` Neeraj Sanjay Kale [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250306180931.57705-3-neeraj.sanjaykale@nxp.com \
    --to=neeraj.sanjaykale@nxp.com \
    --cc=amitkumar.karwar@nxp.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcel@holtmann.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®