[PATCH v8 06/13] drm/bridge: analogix_dp: Add support to get panel from the DP AUX bus

[Damon Ding <damon.ding@rock-chips.com>]

The main modification is moving the DP AUX initialization from function
analogix_dp_bind() to analogix_dp_probe(). In order to get the EDID of
eDP panel during probing, it is also needed to advance PM operations to
ensure that eDP controller and phy are prepared for AUX transmission.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>

---

Changes in v4:
- Use done_probing() to call drm_of_find_panel_or_bridge() and
  component_add() when getting panel from the DP AUX bus

Changes in v5:
- Advance PM operations to make eDP AUX work well

Changes in v6:
- Use devm_pm_runtime_enable() instead of devm_add_action_or_reset()
- Add a new function analogix_dp_remove() to ensure symmetry for PM
  operations

Changes in v7:
- Fix the misspelling of word 'operations' in commit message
- Remove the check related to CONFIG_PM
- Remove the unnecessary call to pm_runtime_dont_use_autosuspend() if
  devm_pm_runtime_enable() fails
- Remove unnecessary function analogix_dp_remove()
- Add new function analogix_dpaux_wait_hpd_asserted()

Changes in v8:
- Move the addition of the analogix_dpaux_wait_hpd_asserted() to the
  other patch
---
 .../drm/bridge/analogix/analogix_dp_core.c    | 20 ++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index dd91760c4b1c..2b76a9cf3bcb 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1650,6 +1650,17 @@ analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data)
 		return ERR_PTR(ret);
 	}
 
+	dp->aux.name = "DP-AUX";
+	dp->aux.transfer = analogix_dpaux_transfer;
+	dp->aux.dev = dp->dev;
+	drm_dp_aux_init(&dp->aux);
+
+	pm_runtime_use_autosuspend(dp->dev);
+	pm_runtime_set_autosuspend_delay(dp->dev, 100);
+	ret = devm_pm_runtime_enable(dp->dev);
+	if (ret)
+		return ERR_PTR(ret);
+
 	return dp;
 }
 EXPORT_SYMBOL_GPL(analogix_dp_probe);
@@ -1696,15 +1707,6 @@ int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
 	dp->drm_dev = drm_dev;
 	dp->encoder = dp->plat_data->encoder;
 
-	pm_runtime_use_autosuspend(dp->dev);
-	pm_runtime_set_autosuspend_delay(dp->dev, 100);
-	ret = devm_pm_runtime_enable(dp->dev);
-	if (ret)
-		return ret;
-
-	dp->aux.name = "DP-AUX";
-	dp->aux.transfer = analogix_dpaux_transfer;
-	dp->aux.dev = dp->dev;
 	dp->aux.drm_dev = drm_dev;
 
 	ret = drm_dp_aux_register(&dp->aux);
-- 
2.34.1