From: Kim Seer Paller <kimseer.paller@analog.com>
To: Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Jonathan Corbet <corbet@lwn.net>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
Cc: <linux-hwmon@vger.kernel.org>, <linux-doc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-i2c@vger.kernel.org>,
Kim Seer Paller <kimseer.paller@analog.com>,
Cherrence Sarip <cherrence.sarip@analog.com>
Subject: [PATCH 1/3] hwmon: (pmbus/ltc7841) add support for LT717x - docs
Date: Mon, 17 Mar 2025 13:02:25 +0800 [thread overview]
Message-ID: <20250317-hwmon-next-v1-1-da0218c38197@analog.com> (raw)
In-Reply-To: <20250317-hwmon-next-v1-0-da0218c38197@analog.com>
Add LT7170 and LT7171 to compatible devices of LTC2978.
Co-developed-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
---
Documentation/hwmon/ltc2978.rst | 28 +++++++++++++++++++++++++---
1 file changed, 25 insertions(+), 3 deletions(-)
diff --git a/Documentation/hwmon/ltc2978.rst b/Documentation/hwmon/ltc2978.rst
index feae53eb9fbf5cff8f7a484c163acad011315d8d..0b72d566cac709aeafe53d08680ad65221bfa33f 100644
--- a/Documentation/hwmon/ltc2978.rst
+++ b/Documentation/hwmon/ltc2978.rst
@@ -5,6 +5,22 @@ Kernel driver ltc2978
Supported chips:
+ * Analog Devices LT7170
+
+ Prefix: 'lt7170'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/lt7170.html
+
+ * Analog Devices LT7171
+
+ Prefix: 'lt7171'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/lt7171.html
+
* Linear Technology LTC2972
Prefix: 'ltc2972'
@@ -223,6 +239,8 @@ Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
+- LT7170 and LT7171 are 20 A, 16 V, single- or dual-phase Silent Switcher
+- step-down regulators with Digital Power System Management.
- LTC2974 and LTC2975 are quad digital power supply managers.
- LTC2978 is an octal power supply monitor.
- LTC2977 is a pin compatible replacement for LTC2978.
@@ -300,6 +318,7 @@ in1_reset_history Reset input voltage history.
in[N]_label "vout[1-8]".
+ - LT7170, LT7171: N=2
- LTC2972: N=2-3
- LTC2974, LTC2975: N=2-5
- LTC2977, LTC2979, LTC2980, LTM2987: N=2-9
@@ -338,6 +357,8 @@ in[N]_reset_history Reset output voltage history.
temp[N]_input Measured temperature.
+ - On LT7170 and LT7171, temp1 reports the chip
+ temperature.
- On LTC2972, temp[1-2] report external temperatures,
and temp 3 reports the chip temperature.
- On LTC2974 and LTC2975, temp[1-4] report external
@@ -411,9 +432,9 @@ power[N]_input Measured output power.
curr1_label "iin".
- LTC3880, LTC3883, LTC3884, LTC3886, LTC3887, LTC3889,
- LTM4644, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680,
- and LTM4700 only.
+ LT7170, LT7171, LTC3880, LTC3883, LTC3884, LTC3886,
+ LTC3887, LTC3889, LTM4644, LTM4675, LTM4676, LTM4677,
+ LTM4678, LTM4680, and LTM4700 only.
curr1_input Measured input current.
@@ -431,6 +452,7 @@ curr1_reset_history Reset input current history.
curr[N]_label "iout[1-4]".
+ - LT7170, LT7171: N=1
- LTC2972: N-1-2
- LTC2974, LTC2975: N=1-4
- LTC2977, LTC2979, LTC2980, LTM2987: not supported
--
2.34.1
next prev parent reply other threads:[~2025-03-17 5:03 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-17 5:02 [PATCH 0/3] Add support for LT7170 and LT7171 Regulator Kim Seer Paller
2025-03-17 5:02 ` Kim Seer Paller [this message]
2025-03-17 15:03 ` [PATCH 1/3] hwmon: (pmbus/ltc7841) add support for LT717x - docs Guenter Roeck
2025-03-17 5:02 ` [PATCH 2/3] dt-bindings: hwmon: ltc2978: add support for LT717x Kim Seer Paller
2025-03-17 11:34 ` Krzysztof Kozlowski
2025-03-17 15:04 ` Guenter Roeck
2025-03-17 5:02 ` [PATCH 3/3] hwmon: (pmbus/ltc2978) add support for lt717x Kim Seer Paller
2025-03-17 15:05 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250317-hwmon-next-v1-1-da0218c38197@analog.com \
--to=kimseer.paller@analog.com \
--cc=Delphine_CC_Chiu@Wiwynn.com \
--cc=Frank.Li@nxp.com \
--cc=cherrence.sarip@analog.com \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=krzk+dt@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®