From: Caleb James DeLisle <cjd@cjdns.fr>
To: linux-mips@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
benjamin.larsson@genexis.eu, Caleb James DeLisle <cjd@cjdns.fr>
Subject: [PATCH v1 0/8] Add EcoNet EN751221 MIPS platform support
Date: Fri, 21 Mar 2025 13:46:25 +0000 [thread overview]
Message-ID: <20250321134633.2155141-1-cjd@cjdns.fr> (raw)
EcoNet MIPS SoCs are big endian machines based on 34Kc and 1004Kc
processors. They are found in xDSL and xPON modems, and contain PCM
(VoIP), Ethernet, USB, GPIO, I2C, SPI (Flash), UART, and PCIe.
The EcoNet MIPS SoCs are divided broadly into two families, the
EN751221 family based on the 34Kc, and the EN751627 family based on
the 1004Kc. Individual SoCs within a family are roughly the same, but
with different peripherals.
This patchset adds very basic "boots to a console" support for the
EN751221 family. EN751627 support and additional drivers will come in
a future patchset.
Note that while EcoNet is similar to Airoha (AN7513, AN7581) in terms
of peripherals, it is different because Airoha is based on ARM.
This patchset is against mips-next.
Caleb James DeLisle (8):
dt-bindings: vendor-prefixes: Add EcoNet
dt-bindings: interrupt-controller: Add EcoNet EN751221 INTC
irqchip: Add EcoNet EN751221 INTC
dt-bindings: timer: Add EcoNet HPT CPU Timer
clocksource/drivers: Add EcoNet Timer HPT driver
dt-bindings: mips: Add EcoNet platform binding
mips: Add EcoNet MIPS platform support
MAINTAINERS: Add EcoNet MIPS platform entry
.../econet,en751221-intc.yaml | 77 +++++
.../devicetree/bindings/mips/econet.yaml | 27 ++
.../bindings/timer/econet,timer-hpt.yaml | 58 ++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 12 +
arch/mips/Kbuild.platforms | 1 +
arch/mips/Kconfig | 25 ++
arch/mips/boot/compressed/uart-16550.c | 5 +
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/econet/Makefile | 2 +
arch/mips/boot/dts/econet/en751221.dtsi | 62 ++++
.../boot/dts/econet/en751221_test_image.dts | 19 ++
arch/mips/econet/Kconfig | 42 +++
arch/mips/econet/Makefile | 2 +
arch/mips/econet/Platform | 5 +
arch/mips/econet/init.c | 78 +++++
drivers/clocksource/Kconfig | 8 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-econet-hpt.c | 221 ++++++++++++++
drivers/irqchip/Kconfig | 5 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-econet-en751221.c | 280 ++++++++++++++++++
22 files changed, 934 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/econet,en751221-intc.yaml
create mode 100644 Documentation/devicetree/bindings/mips/econet.yaml
create mode 100644 Documentation/devicetree/bindings/timer/econet,timer-hpt.yaml
create mode 100644 arch/mips/boot/dts/econet/Makefile
create mode 100644 arch/mips/boot/dts/econet/en751221.dtsi
create mode 100644 arch/mips/boot/dts/econet/en751221_test_image.dts
create mode 100644 arch/mips/econet/Kconfig
create mode 100644 arch/mips/econet/Makefile
create mode 100644 arch/mips/econet/Platform
create mode 100644 arch/mips/econet/init.c
create mode 100644 drivers/clocksource/timer-econet-hpt.c
create mode 100644 drivers/irqchip/irq-econet-en751221.c
--
2.30.2
next reply other threads:[~2025-03-21 13:53 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-21 13:46 Caleb James DeLisle [this message]
2025-03-21 13:46 ` [PATCH v1 1/8] dt-bindings: vendor-prefixes: Add EcoNet Caleb James DeLisle
2025-03-21 13:46 ` [PATCH v1 2/8] dt-bindings: interrupt-controller: Add EcoNet EN751221 INTC Caleb James DeLisle
2025-03-21 15:52 ` Rob Herring (Arm)
2025-03-21 17:19 ` Caleb James DeLisle
2025-03-21 21:17 ` Rob Herring
2025-03-21 23:55 ` Caleb James DeLisle
2025-03-21 13:46 ` [PATCH v1 3/8] irqchip: " Caleb James DeLisle
2025-03-21 20:26 ` Thomas Gleixner
2025-03-21 22:20 ` Caleb James DeLisle
2025-03-22 8:20 ` Thomas Gleixner
2025-03-23 3:06 ` Caleb James DeLisle
2025-03-23 17:56 ` Thomas Gleixner
2025-03-21 13:46 ` [PATCH v1 4/8] dt-bindings: timer: Add EcoNet HPT CPU Timer Caleb James DeLisle
2025-03-21 20:56 ` Krzysztof Kozlowski
2025-03-21 23:21 ` Caleb James DeLisle
2025-03-23 12:39 ` Krzysztof Kozlowski
2025-03-23 23:53 ` Caleb James DeLisle
2025-03-24 7:13 ` Krzysztof Kozlowski
2025-03-24 12:25 ` Caleb James DeLisle
2025-03-21 13:46 ` [PATCH v1 5/8] clocksource/drivers: Add EcoNet Timer HPT driver Caleb James DeLisle
2025-03-21 13:46 ` [PATCH v1 6/8] dt-bindings: mips: Add EcoNet platform binding Caleb James DeLisle
2025-03-21 20:57 ` Krzysztof Kozlowski
2025-03-21 13:46 ` [PATCH v1 7/8] mips: Add EcoNet MIPS platform support Caleb James DeLisle
2025-03-21 21:00 ` Krzysztof Kozlowski
2025-03-21 23:43 ` Caleb James DeLisle
2025-03-21 13:46 ` [PATCH v1 8/8] MAINTAINERS: Add EcoNet MIPS platform entry Caleb James DeLisle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250321134633.2155141-1-cjd@cjdns.fr \
--to=cjd@cjdns.fr \
--cc=benjamin.larsson@genexis.eu \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=robh@kernel.org \
--cc=tglx@linutronix.de \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®