mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
To: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
	"Mauro Carvalho Chehab" <mchehab@kernel.org>,
	"Sakari Ailus" <sakari.ailus@linux.intel.com>
Cc: linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
	"Mauro Carvalho Chehab" <mchehab+huawei@kernel.org>,
	"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
	"Jacopo Mondi" <jacopo.mondi@ideasonboard.com>,
	"Tomi Valkeinen" <tomi.valkeinen+renesas@ideasonboard.com>
Subject: [PATCH v2 00/15] media: rcar: Streams support
Date: Wed, 26 Mar 2025 13:09:22 +0200	[thread overview]
Message-ID: <20250326-rcar-streams-v2-0-d0d7002c641f@ideasonboard.com> (raw)

Add streams support to Renesas rcar platform driver.

The series attempts to keep compatibility with the current upstream.
However, in upstream there's some kind of custom multi-stream support
implemented to the rcar driver, which breaks at patch "media: rcar-csi2:
Simplify rcsi2_calc_mbps()".

The behavior should not change when using a single stream.

Testing is problematic, as the only way currently for me to get multiple
streams is by using the GMSL2 deserializer add-on board with GMSL2
serializers. These are not supported in upstream. If someone has the
hardware and wants to test, I can share the very-WIP branch that
contains the missing pieces.

 Tomi

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
Changes in v2:
- Rebased on top of latest upstream, and updated the dependencies to
  match the latest serieses sent.
- Add new patch "media: rcar-csi2: Use the pad version of v4l2_get_link_freq()"
- Drop "media: rcar-csi2: Fix typo" (it was not a typo)
- Update the code in calc_mbps(). The previous method relied on
  V4L2_CID_LINK_FREQ, but that's not available if the link-freq is
  provided via get_mbus_config().
- Dropped dependencies to Niklas' old series which doesn't apply
  cleanly. It's needed for multi-stream, but not for the current
  upstream which only has a single stream use case.
- Link to v1: https://lore.kernel.org/r/20250219-rcar-streams-v1-0-f1b93e370aab@ideasonboard.com

---
Tomi Valkeinen (15):
      media: rcar-csi2: Use the pad version of v4l2_get_link_freq()
      media: rcar-isp: Improve ISPPROCMODE_DT_PROC_MODE_VC
      media: rcar-isp: Move {enable|disable}_streams() calls
      media: rcar-csi2: Move {enable|disable}_streams() calls
      media: rcar-csi2: Move rcar2_calc_mbps()
      media: rcar-csi2: Simplify rcsi2_calc_mbps()
      media: rcar-csi2: Optimize rcsi2_calc_mbps()
      media: rcar-csi2: Switch to Streams API
      media: rcar-isp: Switch to Streams API
      media: rcar-csi2: Add .get_frame_desc op
      media: rcar-isp: Call get_frame_desc to find out VC & DT
      media: rcar-csi2: Add more stream support to rcsi2_calc_mbps()
      media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3)
      media: rcar-csi2: Add full streams support
      media: rcar-isp: Add full streams support

 drivers/media/platform/renesas/rcar-csi2.c | 426 ++++++++++++++++++++---------
 drivers/media/platform/renesas/rcar-isp.c  | 228 +++++++++++----
 2 files changed, 479 insertions(+), 175 deletions(-)
---
base-commit: f2151613e040973c868d28c8b00885dfab69eb75
change-id: 20250219-rcar-streams-1fdea8860e5e
prerequisite-message-id: <20250210175615.1686529-1-niklas.soderlund+renesas@ragnatech.se>
prerequisite-patch-id: a4aa6a184c6a21fc4536c11e14d9b5cc61f13346
prerequisite-patch-id: 1b0091875529d392b142814005baa38b2ef77f98
prerequisite-patch-id: 4c960ae93b1e663b11194903ed1810e0ed1e4f59
prerequisite-patch-id: a5641e1dcad0f39baef8996b6731a471046f18f9
prerequisite-patch-id: 481317ba4b987cbb069c31f3372686a59c0fcb67
prerequisite-change-id: 20250324-rcar-fix-raw-c7967ff85d3e:v1
prerequisite-patch-id: b21819aa41855942f3474ff8135daccc9c7c652d
prerequisite-patch-id: af375b9da2a977ea10d1fee2d500de5a2dbe53dd
prerequisite-patch-id: 2278b5cd1de5008ef35f9c9f34e3a53bb98147da
prerequisite-change-id: 20250218-frame-desc-passthrough-66805e413974:v4
prerequisite-patch-id: bce4a915a29a64f88ed1bb600c08df37d2ba20c6
prerequisite-patch-id: 69b75e7dad9ced905cb39a72f18bebbf3e8f998a
prerequisite-patch-id: 58463f6944c76acd6cf203b14a2836cdb0db2461

Best regards,
-- 
Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>


             reply	other threads:[~2025-03-26 11:10 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-26 11:09 Tomi Valkeinen [this message]
2025-03-26 11:09 ` [PATCH v2 01/15] media: rcar-csi2: Use the pad version of v4l2_get_link_freq() Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 02/15] media: rcar-isp: Improve ISPPROCMODE_DT_PROC_MODE_VC Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 03/15] media: rcar-isp: Move {enable|disable}_streams() calls Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 04/15] media: rcar-csi2: " Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 05/15] media: rcar-csi2: Move rcar2_calc_mbps() Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 06/15] media: rcar-csi2: Simplify rcsi2_calc_mbps() Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 07/15] media: rcar-csi2: Optimize rcsi2_calc_mbps() Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 08/15] media: rcar-csi2: Switch to Streams API Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 09/15] media: rcar-isp: " Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 10/15] media: rcar-csi2: Add .get_frame_desc op Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 11/15] media: rcar-isp: Call get_frame_desc to find out VC & DT Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 12/15] media: rcar-csi2: Add more stream support to rcsi2_calc_mbps() Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 13/15] media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3) Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 14/15] media: rcar-csi2: Add full streams support Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 15/15] media: rcar-isp: " Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250326-rcar-streams-v2-0-d0d7002c641f@ideasonboard.com \
    --to=tomi.valkeinen+renesas@ideasonboard.com \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab+huawei@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®