Hi Conor, > On Wed, Mar 26, 2025 at 03:09:30PM +0100, Lukasz Majewski wrote: > > The measurement device on Liebherr's (LWE) boards is used to monitor > > the overall state of the device. It does have SPI interface to > > communicate with Linux host via spidev driver. Document the SPI DT > > binding as trivial SPI device. > > > > Signed-off-by: Lukasz Majewski > > --- > > You should not do a resend with no explanation as to why. > Additionally, I would like to know why my review on the original > patch was ignored: > https://lore.kernel.org/all/20250225-despair-rural-dc10216005f4@spud/#t > I've made a mistake, as I've used the lwe prefix, which is the different branch office for Liebherr. As we discussed last time - it would be better to use the already present 'lwn' vendor prefix as several other boards from this company use it (display5, bk4, xea, btt3). And this was apparent, after I've resent the patches. My mistake. Regarding the comment - on xea, btt the binding would be used, as those two boards (based on imx287) are using it. Hence, single "trivial device" would be OK. The v2 of this patch has the proper 'lwn,btt' binding. > Cheers, > Conor. > > > Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml > > b/Documentation/devicetree/bindings/trivial-devices.yaml index > > fadbd3c041c8..5d736a9792c2 100644 --- > > a/Documentation/devicetree/bindings/trivial-devices.yaml +++ > > b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -161,6 > > +161,8 @@ properties: > > - jedec,spd5118 > > # Linear Technology LTC2488 > > - lineartechnology,ltc2488 > > + # Liebherr on-board measurement SPI device > > + - lwe,btt > > # 5 Bit Programmable, Pulse-Width Modulator > > - maxim,ds1050 > > # 10 kOhm digital potentiometer with I2C interface > > -- > > 2.39.5 > > Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de