From: Li Wang <liwang@redhat.com>
To: linux-mm@kvack.org, linux-kselftest@vger.kernel.org,
linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
shuah@kernel.org
Cc: dev.jain@arm.com, anshuman.khandual@arm.com,
kirill.shutemov@linux.intel.com
Subject: [PATCH] selftest/mm: va_high_addr_switch: add ppc64 support check
Date: Thu, 27 Mar 2025 19:48:13 +0800 [thread overview]
Message-ID: <20250327114813.25980-1-liwang@redhat.com> (raw)
This patch adds PPC64 Radix MMU support to the va_high_addr_switch.sh
by introducing check_supported_ppc64(). The function verifies:
- 5-level paging (PGTABLE_LEVELS >= 5) enable in kernel config
- Radix MMU (required for PPC64 5-level translation)
- HugePages availability (needed for some tests)
If any check fails, the test is skipped (ksft_skip). This ensures
compatibility with Power9/Power10 systems running in Radix MMU mode.
Avoid failures on 4-level paging system:
# mmap(NULL, MAP_HUGETLB): 0xffffffffffffffff - FAILED
# mmap(LOW_ADDR, MAP_HUGETLB): 0xffffffffffffffff - FAILED
# mmap(HIGH_ADDR, MAP_HUGETLB): 0xffffffffffffffff - FAILED
# mmap(HIGH_ADDR, MAP_HUGETLB) again: 0xffffffffffffffff - FAILED
# mmap(HIGH_ADDR, MAP_FIXED | MAP_HUGETLB): 0xffffffffffffffff - FAILED
# mmap(-1, MAP_HUGETLB): 0xffffffffffffffff - FAILED
# mmap(-1, MAP_HUGETLB) again: 0xffffffffffffffff - FAILED
# mmap(ADDR_SWITCH_HINT - PAGE_SIZE, 2*HUGETLB_SIZE, MAP_HUGETLB): 0xffffffffffffffff - FAILED
# mmap(ADDR_SWITCH_HINT , 2*HUGETLB_SIZE, MAP_FIXED | MAP_HUGETLB): 0xffffffffffffffff - FAILED
Signed-off-by: Li Wang <liwang@redhat.com>
---
.../selftests/mm/va_high_addr_switch.sh | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/tools/testing/selftests/mm/va_high_addr_switch.sh b/tools/testing/selftests/mm/va_high_addr_switch.sh
index 2c725773cd79..1f92e8caceac 100755
--- a/tools/testing/selftests/mm/va_high_addr_switch.sh
+++ b/tools/testing/selftests/mm/va_high_addr_switch.sh
@@ -41,6 +41,31 @@ check_supported_x86_64()
fi
}
+check_supported_ppc64()
+{
+ local config="/proc/config.gz"
+ [[ -f "${config}" ]] || config="/boot/config-$(uname -r)"
+ [[ -f "${config}" ]] || fail "Cannot find kernel config in /proc or /boot"
+
+ local pg_table_levels=$(gzip -dcfq "${config}" | grep PGTABLE_LEVELS | cut -d'=' -f 2)
+ if [[ "${pg_table_levels}" -lt 5 ]]; then
+ echo "$0: PGTABLE_LEVELS=${pg_table_levels}, must be >= 5 to run this test"
+ exit $ksft_skip
+ fi
+
+ local mmu_support=$(grep -m1 "mmu" /proc/cpuinfo | awk '{print $3}')
+ if [[ "$mmu_support" != "radix" ]]; then
+ echo "$0: System does not use Radix MMU, required for 5-level paging"
+ exit $ksft_skip
+ fi
+
+ local hugepages_total=$(awk '/HugePages_Total/ {print $2}' /proc/meminfo)
+ if [[ "${hugepages_total}" -eq 0 ]]; then
+ echo "$0: HugePages are not enabled, required for some tests"
+ exit $ksft_skip
+ fi
+}
+
check_test_requirements()
{
# The test supports x86_64 and powerpc64. We currently have no useful
@@ -50,6 +75,9 @@ check_test_requirements()
"x86_64")
check_supported_x86_64
;;
+ "ppc64le"|"ppc64")
+ check_supported_ppc64
+ ;;
*)
return 0
;;
--
2.48.1
reply other threads:[~2025-03-27 11:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250327114813.25980-1-liwang@redhat.com \
--to=liwang@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=anshuman.khandual@arm.com \
--cc=dev.jain@arm.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®