[PATCH 1/4] ASoC: fsl_sai: allow to set mclk rate with zero clk_id

[Shengjiu Wang <shengjiu.wang@nxp.com>]

If clk_id is zero, it means FSL_SAI_CLK_BUS in fsl_sai_set_dai_sysclk(),
as the clk[FSL_SAI_CLK_BUS]'s rate can't be changed, there is no rate
changed for mclk.

But with audio-graph-card, the clk_id is always zero, in order to allow
to set mclk rate with zero clk_id, update the condition to be if clk_id is
zero, then set the FSL_SAI_CLK_MAST1's rate. This would not change the
original function for master mode.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 sound/soc/fsl/fsl_sai.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index ed2b4780c470..bcb46a0b5e68 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -238,22 +238,22 @@ static int fsl_sai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 	if (dir == SND_SOC_CLOCK_IN)
 		return 0;
 
-	if (freq > 0 && clk_id != FSL_SAI_CLK_BUS) {
-		if (clk_id < 0 || clk_id >= FSL_SAI_MCLK_MAX) {
-			dev_err(cpu_dai->dev, "Unknown clock id: %d\n", clk_id);
-			return -EINVAL;
-		}
+	if (clk_id < 0 || clk_id >= FSL_SAI_MCLK_MAX) {
+		dev_err(cpu_dai->dev, "Unknown clock id: %d\n", clk_id);
+		return -EINVAL;
+	}
 
-		if (IS_ERR_OR_NULL(sai->mclk_clk[clk_id])) {
-			dev_err(cpu_dai->dev, "Unassigned clock: %d\n", clk_id);
-			return -EINVAL;
-		}
+	if (IS_ERR_OR_NULL(sai->mclk_clk[clk_id])) {
+		dev_err(cpu_dai->dev, "Unassigned clock: %d\n", clk_id);
+		return -EINVAL;
+	}
 
-		if (sai->mclk_streams == 0) {
-			ret = fsl_sai_set_mclk_rate(cpu_dai, clk_id, freq);
-			if (ret < 0)
-				return ret;
-		}
+	if (sai->mclk_streams == 0 && freq > 0) {
+		ret = fsl_sai_set_mclk_rate(cpu_dai,
+					    clk_id ? clk_id : FSL_SAI_CLK_MAST1,
+					    freq);
+		if (ret < 0)
+			return ret;
 	}
 
 	ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq, true);
-- 
2.34.1