[PATCH v3 0/5] nvme: make core.nvme_multipath configurable

[John Meneghini <jmeneghi@redhat.com>]

As agreed at LSF/MM here is a v3 patch set which includes the 
new CONFIG_NVME_ENABLE_MULTIPATH_PARAM option.

NOTE: we agreed to call this CONFIG_NVME_DISBALE_MULTIPATH_PARAM.
However, during testing I realized that we needed to make the 
logic positive or else many of the default make 'config' rules
would produce the wrong results. 

For example:

 make localmodconfig
 make allmodconfig 

would end up compiling out the core_nvme.multipath
parameter, and I don't think this is what we want.

To remove the core.nvme_multipath one needs to 
explicity overide the default setting by saying
CONFIG_NVME_ENABLE_MULTIPATH_PARAM=n.

The current default setting for this option is

  CONFIG_NVME_ENABLE_MULTIPATH_PARAM=y.

To remove the core_nvme.multipath one needs to 
explicity overide the default setting by saying
CONFIG_NVME_ENABLE_MULTIPATH_PARAM=n.

Keith, I suggest that we add these to nvme-6.16 since there are a few
more changes than I had planned for. I'd like these patches to get some
soak time before they merge.

Closes: https://lore.kernel.org/linux-nvme/20241121220321.40616-1-bgurney@redhat.com/
Closes: https://lore.kernel.org/linux-nvme/20250204211158.43126-1-bgurney@redhat.com/
Closes: https://lore.kernel.org/linux-nvme/20250228032541.369804-1-jmeneghi@redhat.com/ 

Signed-off-by: John Meneghini <jmeneghi@redhat.com>

Changes Since v2

Changed the patch order and added:

  nvme: add NVME_ENABLE_MULTIPATH_PARAM for loongarch
  nvme: add NVME_ENABLE_MULTIPATH_PARAM for powerpc skiroot

I'm not 100% sure these two are needed but it would be
better to be safe than sorry. 

  nvme-multipath: add the NVME_ENABLE_MULTIPATH_PARAM config option

Changed the name of this config option from 
NVME_MULTIPATH_PARAM to NVME_ENABLE_MULTIPATH_PARAM and
Fixed up the Kconfig description.

Tested the following make options:

  make localmodconfig
  make alldefconfig
  make mod2noconfig
  make allyesconfig
  make allmodconfig
  make olddefconfig
  make oldconfig - accept all defaults

These all provide no change in current behavior.

Changes Since v1

Rebased patches to nvme-v6.15

  nvme: add mulitipath warning to nvme_alloc_ns

Dropped this patch because the dmesg it produced was redundant and not
needed. Testing multiport devices with CONFIG_NVME_MULTIPATH disabled
show the following console message at boot.

[167523.157284] nvme nvme5: Found shared namespace 1, but multipathing not supported.
[167523.217083] nvme nvme6: Please enable CONFIG_NVME_MULTIPATH for full support of multi-port devices.

  nvme-multipath: add the NVME_MULTIPATH_PARAM config option

Fixed up the Kconfig description for NVME_MULTIPATH_PARAM.
Add default y and tested the follow Kconfig options.

Tested the following:

  make mod2noconfig
  make allyesconfig
  make allmodconfig
  make olddefconfig
  make oldconfig - accept all defaults

No change in current behavior.

  nvme: update the multipath warning in nvme_init_ns_head

Tests ran with CONFIG_NVME_MULTIPATH=y and CONFIG_NVME_MULTIPATH_PARM=n

No change in current behavior except:

  [root@rhel-storage-108 ~]# cat /sys/module/nvme_core/parameters/multipath
  cat: /sys/module/nvme_core/parameters/multipath: No such file or directory
  
The following does nothing, just like it does when CONFIG_NVME_MULTIPATH=n

  [root@rhel-storage-108 ~]# grubby --update-kernel=ALL --args="nvme_core.multipath=N"
  [root@rhel-storage-108 ~]# reboot now
  .
  .
  .
  [root@rhel-storage-108 ~]# cat /proc/cmdline
  BOOT_IMAGE=(hd1,gpt2)/vmlinuz-6.14.0-rc2_config_ana4a+ ...  nvme_core.multipath=N
  [root@rhel-storage-108 ~]# cat /sys/module/nvme_core/parameters/multipath
  cat: /sys/module/nvme_core/parameters/multipath: No such file or directory

Tests ran with CONFIG_NVME_MULTIPATH=y and CONFIG_NVME_MULTIPATH_PARM=y

  There is no change in current behavior:

Tests ran with CONFIG_NVME_MULTIPATH=y, CONFIG_NVME_MULTIPATH_PARM=y
and nvme_core.multipath=N

  [  372.040105] nvme nvme4: Found shared namespace 1, but multipathing not supported.
  [  372.047606] nvme nvme4: Shared namespace support requires core_nvme.multipath=Y.
                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
			                   new message
  [  372.105469] nvme nvme5: creating 2 I/O queues.
  [  372.110383] nvme nvme5: mapped 2/0/0 default/read/poll queues.
  [  372.125480] nvme nvme5: new ctrl: NQN ....
  [  372.166081] nvme nvme5: Found shared namespace 1, but multipathing not supported.
  [  372.235964] nvme nvme6: creating 2 I/O queues.
  [  372.240926] nvme nvme6: mapped 2/0/0 default/read/poll queues.
  [  372.255964] nvme nvme6: new ctrl: NQN ....
  [root@rhel-storage-108 ~]# cat /sys/module/nvme_core/parameters/multipath
  N
  [root@rhel-storage-108 ~]# grubby --remove-args="nvme_core.multipath=N" --update-kernel=ALL
  [root@rhel-storage-108 ~]# grubby --info=ALL | grep nvme_core 
  [root@rhel-storage-108 ~]# reboot now
  .
  .
  .
  [root@rhel-storage-108 ~]# cat /sys/module/nvme_core/parameters/multipath
  Y



John Meneghini (5):
  nvme: update the multipath warning in nvme_init_ns_head
  nvme: change the NVME_MULTIPATH config option description
  nvme: add the NVME_ENABLE_MULTIPATH_PARAM config option
  nvme: add NVME_ENABLE_MULTIPATH_PARAM for loongarch
  nvme: add NVME_ENABLE_MULTIPATH_PARAM for powerpc skiroot

 arch/loongarch/configs/loongson3_defconfig |  1 +
 arch/powerpc/configs/skiroot_defconfig     |  1 +
 drivers/nvme/host/Kconfig                  | 24 ++++++++++++++++++----
 drivers/nvme/host/core.c                   |  2 +-
 drivers/nvme/host/multipath.c              |  2 ++
 5 files changed, 25 insertions(+), 5 deletions(-)

-- 
2.48.1