Hi Andrew, > > + ethphy0: ethernet-phy@0 { > > + reg = <0>; > > + smsc,disable-energy-detect; > > + /* Both PHYs (i.e. 0,1) have the same, > > single GPIO, */ > > + /* line to handle both, their interrupts > > (AND'ed) */ > > + interrupt-parent = <&gpio4>; > > + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; > > Shared interrupts cannot be edge. They are level, so that either can > hold the interrupt active until it is cleared. > > Also, PHY interrupts in general are level, because there are multiple > interrupt sources within the PHY, and you need to clear them all > before the interrupt is released. Good point, I will update it accordingly. Thanks. > > Andrew Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de