mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
To: Jyri Sarha <jyri.sarha@iki.fi>,
	 Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	 Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	 David Airlie <airlied@gmail.com>,
	Simona Vetter <simona@ffwll.ch>,  Vinod Koul <vkoul@kernel.org>,
	Kishon Vijay Abraham I <kishon@kernel.org>,
	 Andrzej Hajda <andrzej.hajda@intel.com>,
	 Neil Armstrong <neil.armstrong@linaro.org>,
	Robert Foss <rfoss@kernel.org>,
	 Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	 Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	 linux-phy@lists.infradead.org,
	Francesco Dolcini <francesco@dolcini.it>,
	 Aradhya Bhatia <aradhya.bhatia@linux.dev>,
	 Devarsh Thakkar <devarsht@ti.com>,
	 Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Subject: [PATCH v2 11/18] drm/bridge: cdns-dsi: Remove broken fifo emptying check
Date: Wed, 02 Apr 2025 16:30:53 +0300	[thread overview]
Message-ID: <20250402-cdns-dsi-impro-v2-11-4a093eaa5e27@ideasonboard.com> (raw)
In-Reply-To: <20250402-cdns-dsi-impro-v2-0-4a093eaa5e27@ideasonboard.com>

The driver check if "DPI(HFP) > DSI(HSS+HSA+HSE+HBP)", and rejects the
mode if not.

However, testing shows that this doesn't hold at all. I can set the hfp
to very small values, with no errors. The feedback from the HW team also
was that the check is not right, although it's not clear if there's a
way to validate the FIFO emptying.

The check rejects quite a lot of modes, apparently for no good reason,
so drop the check.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
---
 drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c | 28 --------------------------
 1 file changed, 28 deletions(-)

diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c
index 9797e6faa29d..e85c8652c96e 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c
@@ -453,15 +453,6 @@ bridge_to_cdns_dsi_input(struct drm_bridge *bridge)
 	return container_of(bridge, struct cdns_dsi_input, bridge);
 }
 
-static unsigned int mode_to_dpi_hfp(const struct drm_display_mode *mode,
-				    bool mode_valid_check)
-{
-	if (mode_valid_check)
-		return mode->hsync_start - mode->hdisplay;
-
-	return mode->crtc_hsync_start - mode->crtc_hdisplay;
-}
-
 static unsigned int dpi_to_dsi_timing(unsigned int dpi_timing,
 				      unsigned int dpi_bpp,
 				      unsigned int dsi_pkt_overhead)
@@ -583,7 +574,6 @@ static int cdns_dsi_check_conf(struct cdns_dsi *dsi,
 {
 	struct cdns_dsi_output *output = &dsi->output;
 	struct phy_configure_opts_mipi_dphy *phy_cfg = &output->phy_opts.mipi_dphy;
-	unsigned long dsi_hss_hsa_hse_hbp;
 	unsigned int nlanes = output->dev->lanes;
 	int mode_clock = (mode_valid_check ? mode->clock : mode->crtc_clock);
 	unsigned long req_hs_clk_rate;
@@ -617,24 +607,6 @@ static int cdns_dsi_check_conf(struct cdns_dsi *dsi,
 		return -EINVAL;
 	}
 
-	if (output->dev->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) {
-		dsi_hss_hsa_hse_hbp = dsi_cfg->hbp + DSI_HBP_FRAME_PULSE_OVERHEAD;
-		dsi_hss_hsa_hse_hbp += dsi_cfg->hsa + DSI_HSA_FRAME_OVERHEAD;
-	} else {
-		dsi_hss_hsa_hse_hbp = dsi_cfg->hbp + DSI_HBP_FRAME_EVENT_OVERHEAD;
-	}
-
-	/*
-	 * Make sure DPI(HFP) > DSI(HSS+HSA+HSE+HBP) to guarantee that the FIFO
-	 * is empty before we start a receiving a new line on the DPI
-	 * interface.
-	 */
-	if ((u64)phy_cfg->hs_clk_rate *
-	    mode_to_dpi_hfp(mode, mode_valid_check) * nlanes <
-	    (u64)dsi_hss_hsa_hse_hbp *
-	    (mode_valid_check ? mode->clock : mode->crtc_clock) * 1000)
-		return -EINVAL;
-
 	return 0;
 }
 

-- 
2.43.0


  parent reply	other threads:[~2025-04-02 13:31 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-02 13:30 [PATCH v2 00/18] drm/bridge: cdns-dsi: Make it work a bit better Tomi Valkeinen
2025-04-02 13:30 ` [PATCH v2 01/18] drm/tidss: Fix missing includes and struct decls Tomi Valkeinen
2025-04-07 17:19   ` Aradhya Bhatia
2025-04-02 13:30 ` [PATCH v2 02/18] drm/tidss: Use the crtc_* timings when programming the HW Tomi Valkeinen
2025-04-02 13:30 ` [PATCH v2 03/18] drm/tidss: Adjust the pclk based on the HW capabilities Tomi Valkeinen
2025-04-07 17:20   ` Aradhya Bhatia
2025-05-27  9:13   ` Michael Walle
2025-05-27 12:33     ` Tomi Valkeinen
2025-05-28  7:32       ` Devarsh Thakkar
2025-05-28 13:23         ` Michael Walle
2025-04-02 13:30 ` [PATCH v2 04/18] phy: cdns-dphy: Store hs_clk_rate and return it Tomi Valkeinen
2025-04-02 13:30 ` [PATCH v2 05/18] phy: cdns-dphy: Remove leftover code Tomi Valkeinen
2025-04-07 17:24   ` Aradhya Bhatia
2025-04-02 13:30 ` [PATCH v2 06/18] drm/bridge: cdns-dsi: Adjust mode to negative syncs Tomi Valkeinen
2025-04-02 13:30 ` [PATCH v2 07/18] drm/bridge: cdns-dsi: Fail if HS rate changed when validating PHY config Tomi Valkeinen
2025-04-07 17:26   ` Aradhya Bhatia
2025-04-02 13:30 ` [PATCH v2 08/18] drm/bridge: cdns-dsi: Clean up cdns_dsi_mode2cfg() Tomi Valkeinen
2025-04-07 17:45   ` Aradhya Bhatia
2025-04-02 13:30 ` [PATCH v2 09/18] drm/bridge: cdns-dsi: Fix REG_WAKEUP_TIME value Tomi Valkeinen
2025-04-02 13:30 ` [PATCH v2 10/18] drm/bridge: cdns-dsi: Fix event mode Tomi Valkeinen
2025-04-11 11:04   ` Jayesh Choudhary
2025-04-02 13:30 ` Tomi Valkeinen [this message]
2025-04-02 13:30 ` [PATCH v2 12/18] drm/bridge: cdns-dsi: Drop checks that shouldn't be in .mode_valid() Tomi Valkeinen
2025-04-07 17:59   ` Aradhya Bhatia
2025-04-08  6:09     ` Tomi Valkeinen
2025-04-08  7:09       ` Tomi Valkeinen
2025-04-08 13:40         ` Aradhya Bhatia
2025-04-02 13:30 ` [PATCH v2 13/18] drm/bridge: cdns-dsi: Do not use crtc_* values Tomi Valkeinen
2025-04-02 13:30 ` [PATCH v2 14/18] drm/bridge: cdns-dsi: Use videomode internally Tomi Valkeinen
2025-04-02 13:30 ` [PATCH v2 15/18] drm/bridge: cdns-dsi: Tune adjusted_mode->clock according to dsi needs Tomi Valkeinen
2025-04-02 13:30 ` [PATCH v2 16/18] drm/bridge: cdns-dsi: Update htotal in cdns_dsi_mode2cfg() Tomi Valkeinen
2025-04-02 13:30 ` [PATCH v2 17/18] drm/bridge: cdns-dsi: Drop cdns_dsi_adjust_phy_config() Tomi Valkeinen
2025-04-02 13:31 ` [PATCH v2 18/18] drm/bridge: cdns-dsi: Don't fail on MIPI_DSI_MODE_VIDEO_BURST Tomi Valkeinen
2025-04-11 11:11 ` [PATCH v2 00/18] drm/bridge: cdns-dsi: Make it work a bit better Jayesh Choudhary

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250402-cdns-dsi-impro-v2-11-4a093eaa5e27@ideasonboard.com \
    --to=tomi.valkeinen@ideasonboard.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=airlied@gmail.com \
    --cc=andrzej.hajda@intel.com \
    --cc=aradhya.bhatia@linux.dev \
    --cc=devarsht@ti.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=francesco@dolcini.it \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=jyri.sarha@iki.fi \
    --cc=kishon@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=rfoss@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=tzimmermann@suse.de \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®