[PATCH 0/3] Add support for Sitronix ST7571 LCD controller

[Marcus Folkesson <marcus.folkesson@gmail.com>]

This series add support for the ST7571 LCD Controller.
It is a 4 gray scale dot matrix LCD controller that supports several
interfaces such as SPI, I2C and a 8bit parallell port.

This driver only supports the I2C interface, but all common parts could
easily be put into a common file to be used with other interfaces.
I only have I2C to test with.

The device is a little defiant, it tends to NAK some commands, but all
commands takes effect, hence the I2C_M_IGNORE_NAK flag.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---
Marcus Folkesson (3):
      dt-bindings: st7571-i2c: Add Sitronix ST7571 panel bindings
      drm/st7571-i2c: add support for Sitronix ST7571 LCD controller
      MAINTAINERS: add antry for Sitronix ST7571 LCD controller

 .../bindings/display/sitronix,st7571-i2c.yaml      |  71 +++
 MAINTAINERS                                        |   7 +
 drivers/gpu/drm/tiny/Kconfig                       |  12 +
 drivers/gpu/drm/tiny/Makefile                      |   1 +
 drivers/gpu/drm/tiny/st7571-i2c.c                  | 563 +++++++++++++++++++++
 5 files changed, 654 insertions(+)
---
base-commit: 1e26c5e28ca5821a824e90dd359556f5e9e7b89f
change-id: 20250401-st7571-9382b9cfc03f

Best regards,
-- 
Marcus Folkesson <marcus.folkesson@gmail.com>