mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Robert Hodaszi <robert.hodaszi@digi.com>
To: gregkh@linuxfoundation.org, oneukum@suse.com
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
	stern@rowland.harvard.edu, viro@zeniv.linux.org.uk,
	Robert Hodaszi <robert.hodaszi@digi.com>
Subject: [PATCH] usb: cdc-wdm: avoid setting WDM_READ for ZLP-s
Date: Thu,  3 Apr 2025 16:40:04 +0200	[thread overview]
Message-ID: <20250403144004.3889125-1-robert.hodaszi@digi.com> (raw)

Don't set WDM_READ flag in wdm_in_callback() for ZLP-s, otherwise when
userspace tries to poll for available data, it might - incorrectly -
believe there is something available, and when it tries to non-blocking
read it, it might get stuck in the read loop.

For example this is what glib does for non-blocking read (briefly):

  1. poll()
  2. if poll returns with non-zero, starts a read data loop:
    a. loop on poll() (EINTR disabled)
    b. if revents was set, reads data
      I. if read returns with EINTR or EAGAIN, goto 2.a.
      II. otherwise return with data

So if ZLP sets WDM_READ (#1), we expect data, and try to read it (#2).
But as that was a ZLP, and we are doing non-blocking read, wdm_read()
returns with EAGAIN (#2.b.I), so loop again, and try to read again
(#2.a.).

With glib, we might stuck in this loop forever, as EINTR is disabled
(#2.a).

Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
---
 drivers/usb/class/cdc-wdm.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 86ee39db013f..28c5ed840a40 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -92,7 +92,6 @@ struct wdm_device {
 	u16			wMaxCommand;
 	u16			wMaxPacketSize;
 	__le16			inum;
-	int			reslength;
 	int			length;
 	int			read;
 	int			count;
@@ -214,6 +213,11 @@ static void wdm_in_callback(struct urb *urb)
 	if (desc->rerr == 0 && status != -EPIPE)
 		desc->rerr = status;
 
+	if (length == 0) {
+		dev_dbg(&desc->intf->dev, "received ZLP\n");
+		goto skip_zlp;
+	}
+
 	if (length + desc->length > desc->wMaxCommand) {
 		/* The buffer would overflow */
 		set_bit(WDM_OVERFLOW, &desc->flags);
@@ -222,18 +226,18 @@ static void wdm_in_callback(struct urb *urb)
 		if (!test_bit(WDM_OVERFLOW, &desc->flags)) {
 			memmove(desc->ubuf + desc->length, desc->inbuf, length);
 			desc->length += length;
-			desc->reslength = length;
 		}
 	}
 skip_error:
 
 	if (desc->rerr) {
 		/*
-		 * Since there was an error, userspace may decide to not read
-		 * any data after poll'ing.
+		 * If there was a ZLP or an error, userspace may decide to not
+		 * read any data after poll'ing.
 		 * We should respond to further attempts from the device to send
 		 * data, so that we can get unstuck.
 		 */
+skip_zlp:
 		schedule_work(&desc->service_outs_intr);
 	} else {
 		set_bit(WDM_READ, &desc->flags);
@@ -585,15 +589,6 @@ static ssize_t wdm_read
 			goto retry;
 		}
 
-		if (!desc->reslength) { /* zero length read */
-			dev_dbg(&desc->intf->dev, "zero length - clearing WDM_READ\n");
-			clear_bit(WDM_READ, &desc->flags);
-			rv = service_outstanding_interrupt(desc);
-			spin_unlock_irq(&desc->iuspin);
-			if (rv < 0)
-				goto err;
-			goto retry;
-		}
 		cntr = desc->length;
 		spin_unlock_irq(&desc->iuspin);
 	}
@@ -1005,7 +1000,7 @@ static void service_interrupt_work(struct work_struct *work)
 
 	spin_lock_irq(&desc->iuspin);
 	service_outstanding_interrupt(desc);
-	if (!desc->resp_count) {
+	if (!desc->resp_count && (desc->length || desc->rerr)) {
 		set_bit(WDM_READ, &desc->flags);
 		wake_up(&desc->wait);
 	}
-- 
2.43.0


             reply	other threads:[~2025-04-03 14:41 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-03 14:40 Robert Hodaszi [this message]
2025-04-07  9:23 ` Oliver Neukum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250403144004.3889125-1-robert.hodaszi@digi.com \
    --to=robert.hodaszi@digi.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=oneukum@suse.com \
    --cc=stern@rowland.harvard.edu \
    --cc=viro@zeniv.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®