From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Dorian Cruveiller <doriancruveiller@gmail.com>,
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>,
Sasha Levin <sashal@kernel.org>,
marcel@holtmann.org, luiz.dentz@gmail.com,
linux-bluetooth@vger.kernel.org
Subject: [PATCH AUTOSEL 6.13 41/49] Bluetooth: btusb: Add new VID/PID for WCN785x
Date: Thu, 3 Apr 2025 15:04:00 -0400 [thread overview]
Message-ID: <20250403190408.2676344-41-sashal@kernel.org> (raw)
In-Reply-To: <20250403190408.2676344-1-sashal@kernel.org>
From: Dorian Cruveiller <doriancruveiller@gmail.com>
[ Upstream commit c7629ccfa175e16bb44a60c469214e1a6051f63d ]
Add VID 0489 & PID e10d for Qualcomm WCN785x USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e10d Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms
Signed-off-by: Dorian Cruveiller <doriancruveiller@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 75dbe07e07e21..cf15e18521607 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -375,6 +375,8 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0489, 0xe0f3), .driver_info = BTUSB_QCA_WCN6855 |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x0489, 0xe10d), .driver_info = BTUSB_QCA_WCN6855 |
+ BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3623), .driver_info = BTUSB_QCA_WCN6855 |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x2c7c, 0x0130), .driver_info = BTUSB_QCA_WCN6855 |
--
2.39.5
next prev parent reply other threads:[~2025-04-03 19:05 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-03 19:03 [PATCH AUTOSEL 6.13 01/49] wifi: ath11k: Fix DMA buffer allocation to resolve SWIOTLB issues Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 02/49] wifi: ath11k: fix memory leak in ath11k_xxx_remove() Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 03/49] wifi: ath12k: fix memory leak in ath12k_pci_remove() Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 04/49] wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_process Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 05/49] ata: libata-core: Add 'external' to the libata.force kernel parameter Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 06/49] scsi: mpi3mr: Avoid reply queue full condition Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 07/49] scsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 08/49] net: page_pool: don't cast mp param to devmem Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 09/49] f2fs: don't retry IO for corrupted data scenario Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 10/49] wifi: mac80211: add strict mode disabling workarounds Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 11/49] wifi: mac80211: ensure sdata->work is canceled before initialized Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 12/49] scsi: target: spc: Fix RSOC parameter data header size Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 13/49] net: usb: asix_devices: add FiberGecko DeviceID Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 14/49] page_pool: avoid infinite loop to schedule delayed worker Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 15/49] can: flexcan: Add quirk to handle separate interrupt lines for mailboxes Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 16/49] can: flexcan: add NXP S32G2/S32G3 SoC support Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 17/49] jfs: Fix uninit-value access of imap allocated in the diMount() function Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 18/49] mptcp: move the whole rx path under msk socket lock protection Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 19/49] fs/jfs: cast inactags to s64 to prevent potential overflow Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 20/49] fs/jfs: Prevent integer overflow in AG size calculation Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 21/49] jfs: Prevent copying of nlink with value 0 from disk inode Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 22/49] jfs: add sanity check for agwidth in dbMount Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 23/49] ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 24/49] net: sfp: add quirk for 2.5G OEM BX SFP Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 25/49] wifi: ath12k: Fix invalid data access in ath12k_dp_rx_h_undecap_nwifi Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 26/49] null_blk: replace null_process_cmd() call in null_zone_write() Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 27/49] f2fs: fix to avoid out-of-bounds access in f2fs_truncate_inode_blocks() Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 28/49] net: sfp: add quirk for FS SFP-10GM-T copper SFP+ module Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 29/49] ahci: add PCI ID for Marvell 88SE9215 SATA Controller Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 30/49] ext4: protect ext4_release_dquot against freezing Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 31/49] Revert "f2fs: rebuild nat_bits during umount" Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 32/49] ext4: ignore xattrs past end Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 33/49] cdc_ether|r8152: ThinkPad Hybrid USB-C/A Dock quirk Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 34/49] scsi: st: Fix array overflow in st_setup() Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 35/49] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 36/49] btrfs: reject out-of-band dirty folios during writeback Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 37/49] btrfs: harden block_group::bg_list against list_del() races Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 38/49] wifi: mt76: mt76x2u: add TP-Link TL-WDN6200 ID to device table Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 39/49] net: vlan: don't propagate flags on open Sasha Levin
2025-04-03 19:03 ` [PATCH AUTOSEL 6.13 40/49] tracing: fix return value in __ftrace_event_enable_disable for TRACE_REG_UNREGISTER Sasha Levin
2025-04-03 19:04 ` Sasha Levin [this message]
2025-04-03 19:04 ` [PATCH AUTOSEL 6.13 42/49] Bluetooth: btintel_pcie: Add device id of Whale Peak Sasha Levin
2025-04-03 19:04 ` [PATCH AUTOSEL 6.13 43/49] Bluetooth: btusb: Add 13 USB device IDs for Qualcomm WCN785x Sasha Levin
2025-04-03 19:04 ` [PATCH AUTOSEL 6.13 44/49] Bluetooth: hci_uart: fix race during initialization Sasha Levin
2025-04-03 19:04 ` [PATCH AUTOSEL 6.13 45/49] Bluetooth: btusb: Add 2 HWIDs for MT7922 Sasha Levin
2025-04-03 19:04 ` [PATCH AUTOSEL 6.13 46/49] Bluetooth: hci_qca: use the power sequencer for wcn6750 Sasha Levin
2025-04-03 19:04 ` [PATCH AUTOSEL 6.13 47/49] Bluetooth: qca: simplify WCN399x NVM loading Sasha Levin
2025-04-03 19:04 ` [PATCH AUTOSEL 6.13 48/49] Bluetooth: Add quirk for broken READ_VOICE_SETTING Sasha Levin
2025-04-03 19:04 ` [PATCH AUTOSEL 6.13 49/49] Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250403190408.2676344-41-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=doriancruveiller@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=luiz.von.dentz@intel.com \
--cc=marcel@holtmann.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®