mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sukrut Bellary <sbellary@baylibre.com>
To: Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Angelo Compagnucci <angelo.compagnucci@gmail.com>
Cc: Sukrut Bellary <sbellary@baylibre.com>,
	Nishanth Menon <nm@ti.com>,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 1/2] dt-bindings: iio: adc: ti,adc128s052: Add adc08c and adc10c family
Date: Tue,  8 Apr 2025 06:21:19 -0700	[thread overview]
Message-ID: <20250408132120.836461-2-sbellary@baylibre.com> (raw)
In-Reply-To: <20250408132120.836461-1-sbellary@baylibre.com>

The adcxx4s communicates with a host processor via an SPI/Microwire Bus
interface. The device family responds with 12-bit data, of which the LSB
bits are 0 for the lower resolution devices.
The unavailable bits are 0 in LSB.
Shift is calculated per resolution and used in scaling and
raw data read.

I have been able to test adc102s051,
hence adding just the missing ones in that family.

Lets reuse the binding to support the family of devices with name
ADC<bb><c>S<sss>, where
* bb is the resolution in number of bits (8, 10, 12)
* c is the number of channels (1, 2, 4, 8)
* sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS
and 101 for 1 MSPS)

Complete datasheets are available at TI's website here:
https://www.ti.com/lit/gpn/adc<bb><c>s<sss>.pdf

Co-developed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v3:
	- No changes in dt-bindings
- Link to v2:  https://lore.kernel.org/lkml/20231022031203.632153-1-sukrut.bellary@linux.com/

Changes in v2: 
        - No changes in dt-bindings
- Link to v1: https://lore.kernel.org/all/20220701042919.18180-2-nm@ti.com/
---
 .../devicetree/bindings/iio/adc/ti,adc128s052.yaml          | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
index 775eee972b12..392b4a3e867c 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
@@ -16,6 +16,12 @@ description: |
 properties:
   compatible:
     enum:
+      - ti,adc082s021
+      - ti,adc082s051
+      - ti,adc082s101
+      - ti,adc102s021
+      - ti,adc102s051
+      - ti,adc102s101
       - ti,adc122s021
       - ti,adc122s051
       - ti,adc122s101
-- 
2.34.1


  reply	other threads:[~2025-04-08 13:21 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-08 13:21 [PATCH 0/2] iio: adc: ti-adc128s052: Add support for adc102s021 Sukrut Bellary
2025-04-08 13:21 ` Sukrut Bellary [this message]
2025-04-08 14:33   ` [PATCH 1/2] dt-bindings: iio: adc: ti,adc128s052: Add adc08c and adc10c family Krzysztof Kozlowski
2025-04-08 13:21 ` [PATCH 2/2] iio: adc: ti-adc128s052: Add lower resolution devices support Sukrut Bellary
2025-04-08 20:57   ` David Lechner
2025-04-09 21:42     ` Sukrut Bellary
2025-04-12 13:12   ` Jonathan Cameron
2025-04-15 22:20     ` Sukrut Bellary
2025-04-16  5:58       ` Matti Vaittinen
2025-04-14  6:40   ` Matti Vaittinen
2025-04-14 14:52     ` Nishanth Menon
2025-04-15 22:25     ` Sukrut Bellary
2025-04-12 13:10 ` [PATCH 0/2] iio: adc: ti-adc128s052: Add support for adc102s021 Jonathan Cameron
2025-04-14  6:15   ` Matti Vaittinen
2025-04-15 22:17   ` Sukrut Bellary
  -- strict thread matches above, loose matches on Subject: below --
2022-07-01  4:29 [PATCH 0/2] iio: adc: ti-adc128s052: Add support for adc102s021 and family Nishanth Menon
2022-07-01  4:29 ` [PATCH 1/2] dt-bindings: iio: adc: ti,adc128s052: Add adc08c and adc10c family Nishanth Menon
2022-07-01  6:38   ` Krzysztof Kozlowski
2022-07-01  8:27     ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250408132120.836461-2-sbellary@baylibre.com \
    --to=sbellary@baylibre.com \
    --cc=angelo.compagnucci@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®