From: Stefano Garzarella <sgarzare@redhat.com>
To: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>,
Peter Huewe <peterhuewe@gmx.de>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Jens Wiklander <jens.wiklander@linaro.org>,
Claudiu Beznea <claudiu.beznea@tuxon.dev>,
Naveen N Rao <naveen@kernel.org>,
Nicholas Piggin <npiggin@gmail.com>,
linuxppc-dev@lists.ozlabs.org,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Michael Ellerman <mpe@ellerman.id.au>,
Madhavan Srinivasan <maddy@linux.ibm.com>,
James Bottomley <James.Bottomley@HansenPartnership.com>,
linux-integrity@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sumit Garg <sumit.garg@kernel.org>,
linux-kernel@vger.kernel.org, Jason Gunthorpe <jgg@ziepe.ca>,
Stefano Garzarella <sgarzare@redhat.com>
Subject: [PATCH v3 4/4] tpm/tpm_svsm: support TPM_CHIP_FLAG_SYNC
Date: Mon, 14 Apr 2025 16:56:53 +0200 [thread overview]
Message-ID: <20250414145653.239081-5-sgarzare@redhat.com> (raw)
In-Reply-To: <20250414145653.239081-1-sgarzare@redhat.com>
From: Stefano Garzarella <sgarzare@redhat.com>
This driver does not support interrupts, and receiving the response is
synchronous with sending the command.
So we can set TPM_CHIP_FLAG_SYNC to support synchronous send() and
return responses in the same buffer used for commands. This way we
don't need to implement recv() op.
Keep using the same pre-allocated buffer to avoid having to allocate
it for each command. We need the buffer to have the header required by
the SVSM protocol and the command contiguous in memory.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
drivers/char/tpm/tpm_svsm.c | 27 +++++++++++----------------
1 file changed, 11 insertions(+), 16 deletions(-)
diff --git a/drivers/char/tpm/tpm_svsm.c b/drivers/char/tpm/tpm_svsm.c
index d3ca5615b6f7..db1983072345 100644
--- a/drivers/char/tpm/tpm_svsm.c
+++ b/drivers/char/tpm/tpm_svsm.c
@@ -25,38 +25,32 @@ struct tpm_svsm_priv {
void *buffer;
};
-static int tpm_svsm_send(struct tpm_chip *chip, u8 *buf, size_t len,
+static int tpm_svsm_send(struct tpm_chip *chip, u8 *buf, size_t cmd_len,
size_t buf_size)
{
struct tpm_svsm_priv *priv = dev_get_drvdata(&chip->dev);
int ret;
- ret = svsm_vtpm_cmd_request_fill(priv->buffer, 0, buf, len);
+ ret = svsm_vtpm_cmd_request_fill(priv->buffer, 0, buf, cmd_len);
if (ret)
return ret;
/*
* The SVSM call uses the same buffer for the command and for the
- * response, so after this call, the buffer will contain the response
- * that can be used by .recv() op.
+ * response, so after this call, the buffer will contain the response.
+ *
+ * Note: we have to use an internal buffer because the device in SVSM
+ * expects the svsm_vtpm header + data to be physically contiguous.
*/
- return snp_svsm_vtpm_send_command(priv->buffer);
-}
-
-static int tpm_svsm_recv(struct tpm_chip *chip, u8 *buf, size_t len)
-{
- struct tpm_svsm_priv *priv = dev_get_drvdata(&chip->dev);
+ ret = snp_svsm_vtpm_send_command(priv->buffer);
+ if (ret)
+ return ret;
- /*
- * The internal buffer contains the response after we send the command
- * to SVSM.
- */
- return svsm_vtpm_cmd_response_parse(priv->buffer, buf, len);
+ return svsm_vtpm_cmd_response_parse(priv->buffer, buf, buf_size);
}
static struct tpm_class_ops tpm_chip_ops = {
.flags = TPM_OPS_AUTO_STARTUP,
- .recv = tpm_svsm_recv,
.send = tpm_svsm_send,
};
@@ -85,6 +79,7 @@ static int __init tpm_svsm_probe(struct platform_device *pdev)
dev_set_drvdata(&chip->dev, priv);
+ chip->flags |= TPM_CHIP_FLAG_SYNC;
err = tpm2_probe(chip);
if (err)
return err;
--
2.49.0
next prev parent reply other threads:[~2025-04-14 14:57 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-14 14:56 [PATCH v3 0/4] tpm: add support for sync send() and use it in ftpm and svsm drivers Stefano Garzarella
2025-04-14 14:56 ` [PATCH v3 1/4] tpm: add buf_size parameter in the .send callback Stefano Garzarella
2025-04-30 15:39 ` Jarkko Sakkinen
2025-05-06 12:56 ` Stefano Garzarella
2025-05-08 20:00 ` Jarkko Sakkinen
2025-04-14 14:56 ` [PATCH v3 2/4] tpm: support devices with synchronous send() Stefano Garzarella
2025-04-30 15:41 ` Jarkko Sakkinen
2025-04-14 14:56 ` [PATCH v3 3/4] tpm/tpm_ftpm_tee: support TPM_CHIP_FLAG_SYNC Stefano Garzarella
2025-04-14 14:59 ` Stefano Garzarella
2025-04-28 7:49 ` Sumit Garg
2025-04-30 15:47 ` Jarkko Sakkinen
2025-05-06 13:03 ` Stefano Garzarella
2025-04-14 14:56 ` Stefano Garzarella [this message]
2025-04-30 15:49 ` [PATCH v3 4/4] tpm/tpm_svsm: " Jarkko Sakkinen
2025-05-06 13:06 ` Stefano Garzarella
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250414145653.239081-5-sgarzare@redhat.com \
--to=sgarzare@redhat.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=alexandre.belloni@bootlin.com \
--cc=christophe.leroy@csgroup.eu \
--cc=claudiu.beznea@tuxon.dev \
--cc=jarkko@kernel.org \
--cc=jens.wiklander@linaro.org \
--cc=jgg@ziepe.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maddy@linux.ibm.com \
--cc=mpe@ellerman.id.au \
--cc=naveen@kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=npiggin@gmail.com \
--cc=peterhuewe@gmx.de \
--cc=sumit.garg@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®