[PATCH v3] brcm80211: fmac: Add error log in brcmf_usb_dl_cmd()

[Wentao Liang <vulab@iscas.ac.cn>]

In brcmf_usb_dl_cmd(), the error logging is not enough to describe
the error state. And some caller of the brcmf_usb_dl_cmd() does not
haddel its error. An error log in brcmf_usb_dl_cmd is needed to
prevent silent failure.

Add error handling in brcmf_usb_dl_cmd() to log the command id and
error code in the brcmf_usb_dl_cmd() fails. In this way, every
invocation of the function logs a message upon failure.

Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
---
v3: Change patch name and comment. Move error log into brcmf_usb_dl_cmd().
v2: Remove redundant bailing out code.

 .../wireless/broadcom/brcm80211/brcmfmac/usb.c   | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index d06c724f63d9..a11a6d9f3c2b 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -744,12 +744,16 @@ static int brcmf_usb_dl_cmd(struct brcmf_usbdev_info *devinfo, u8 cmd,
 	char *tmpbuf;
 	u16 size;
 
-	if ((!devinfo) || (devinfo->ctl_urb == NULL))
-		return -EINVAL;
+	if (!devinfo || !devinfo->ctl_urb) {
+		ret = -EINVAL;
+		goto err;
+	}
 
 	tmpbuf = kmalloc(buflen, GFP_ATOMIC);
-	if (!tmpbuf)
-		return -ENOMEM;
+	if (!tmpbuf) {
+		ret = -ENOMEM;
+		goto err;
+	}
 
 	size = buflen;
 	devinfo->ctl_urb->transfer_buffer_length = size;
@@ -783,6 +787,10 @@ static int brcmf_usb_dl_cmd(struct brcmf_usbdev_info *devinfo, u8 cmd,
 finalize:
 	kfree(tmpbuf);
 	return ret;
+
+err:
+	brcmf_err("dl cmd %u failed: err=%d\n", cmd, ret);
+	return ret;
 }
 
 static bool
-- 
2.42.0.windows.2