From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 66A1A21C9E5 for ; Mon, 21 Apr 2025 22:00:38 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.168.131 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1745272840; cv=none; b=C9rmpOQ8TYXwJ9O2L4q4dWr2sK47kypcqc6hNLhzPD0w3PN/ZOjn5n8VB3rbRQohbZnNrP4KWUhZg9NnHZV+2xY1U5LK9SdKAiM+xd/rtkh8SHfJhJe1RM72vuMvzANGeW0icoNMYw0Z8xP9S0YjJW0BY4X/CrEV3u4QRFQcyzg= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1745272840; c=relaxed/simple; bh=Sw+0qUCoX6V4rIrmwTlAs/ERiC1+Xys4YK56yy0dnh8=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=r9v9tRukHV4b0/HwGprIP6SCu1le0SIFdMtA5KOeGSVxeFAc1f4X1fai6FLBUgL8B1J/oE9qZ9mVddCuHb1d63tSiCrehFyp/LpGXM6unjqJZrbLQ4QjECOdhiCDpqkwNYlMK2bz+3fvD8fXg61/XMjOf9twwgDD4sFHwnO9ubU= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=oss.qualcomm.com; spf=pass smtp.mailfrom=oss.qualcomm.com; dkim=pass (2048-bit key) header.d=qualcomm.com header.i=@qualcomm.com header.b=dyd9KvN0; arc=none smtp.client-ip=205.220.168.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=oss.qualcomm.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=oss.qualcomm.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=qualcomm.com header.i=@qualcomm.com header.b="dyd9KvN0" Received: from pps.filterd (m0279866.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 53LK3sjE023423 for ; Mon, 21 Apr 2025 22:00:37 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=qualcomm.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= eXwFQUsAORBiHpjXO8LhW27ItfKPDqTMLumXZEfpvvY=; b=dyd9KvN0MRVoG7mS u5zYgw7Fz7u4CROZ0mQbELfv/boYvuGXMDTXUHR0YuoBxBXQxhCpCIVjJ9WtvfzT hSDyGH5obDMF4QsvKJLmObOX2QWLX0+1mRRbR4fk2fGEWYmZNNRXIt4LsYFI4kxs mgZlLRD7fPZVwEIIVNm4cbOae1vxu4ZotIC6ruxuPUtBsx2cAmaJOnSts/jPXcHP OZPRYd+vFq0rizuLibGAIdqLg3jkGoF8RPByqtp8nwzYQctt8Qmu4Z9RCwdGlFFw 04cS0U24pJTthtp0kuE4dPwJO8RDoXSbFGZFmyUrn6F4BGSQRFjm5nfUhWCDQt5/ U81XSw== Received: from mail-pf1-f200.google.com (mail-pf1-f200.google.com [209.85.210.200]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 46454bna2t-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128 verify=NOT) for ; Mon, 21 Apr 2025 22:00:37 +0000 (GMT) Received: by mail-pf1-f200.google.com with SMTP id d2e1a72fcca58-73720b253fcso3608955b3a.2 for ; Mon, 21 Apr 2025 15:00:37 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1745272836; x=1745877636; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=eXwFQUsAORBiHpjXO8LhW27ItfKPDqTMLumXZEfpvvY=; b=GutG9hQNaDTIdamvQ/GkEn3LLXm5liDI4egb62ockQTCLWpIevDeR4Ku1LsLB4eMV5 TKkiwvUfvSK+0p64GpQuxLAUUTMg2JihWuneGtE9HjchlP4GaBp0fXnJijK1sjMPiUEk +f2g4/TiGYNY1WfMF6ibOqW2kXc2pHxBHiLBkLcmAPOHV1JhiBWH62He4hscfXtHxG1i fWYERZFWGc9wSzYwwpYitewcoALX11Oio7nqWAQXROM9GXITgnTsBxY0Jdnur9rZmMyx pReCG7+RW5MiV8wj0FgAtpYykU4Hlpe7z4kXWCgQ3bbGnT/XaydZR3Q6C9UIwzmxlcD/ LgCg== X-Forwarded-Encrypted: i=1; AJvYcCXD4MTjjnZZZJ1+Z8d33Aw7064cobPX1C6hRMfR4H6dQD8j+VYKiPcvEJEUJpkp/VfPfspxRCsrRZNkMmo=@vger.kernel.org X-Gm-Message-State: AOJu0Yy5aUAvKDBWvedPwzPNXyR6UWOA4HSayKUuHkj3SL3T4Ij5eDAE rJcTS2PI9wQLgd8jqh+essLWG8RAGWN2vZTvL2YUVbqkjOxybGe+xnLalwZLBVg9aN0/MpQKWY2 v4k3TxK2RCWMvEmdLTniPPuYMdUrZN34wutQbRPtQyH8U1s59Lj4bX7EmuOxN1bYeaEe08JE= X-Gm-Gg: ASbGncun8Sfl24kzM/DqkriZrHGE9kkAOgeSamXSQAOY6NDNlmKhKjL1fqD4WbYLA3f NFW7DuBNzKc/qxOUG6fm0dvaoFu0lxI5asGQACImsYvgxvRhunGIuuR7QPxGeO55mx0uhfBpxqE Id2ufmjGtdo2knL2k14AbAIeW2b3YaP9JJeALeWI77GrzT/Kst1nK5wPjlDdqxeEtkB5JuZ+OeT a2F7XzHabnmEEfIgC97inEUElYUSVefDWWTLe9nQ12dIP96TXYxWFX1VgnGjDy6sIIU2G+tKD5f cSzp02uY0PDXgdF+w/CeyEBbeSHvMe4DCblnzZ0C9ZMEAl34gyusNvJgBqKJMAFSp30= X-Received: by 2002:a05:6a00:2e1b:b0:730:75b1:7219 with SMTP id d2e1a72fcca58-73dc14aea82mr14029966b3a.12.1745272836304; Mon, 21 Apr 2025 15:00:36 -0700 (PDT) X-Google-Smtp-Source: AGHT+IFzAwKNUlspDGqsruluUQEpQNGQ9Ez0bUuB5d2HzcuGOSgeC6Iwu6jXnTvdn4K5CI37H4OShQ== X-Received: by 2002:a05:6a00:2e1b:b0:730:75b1:7219 with SMTP id d2e1a72fcca58-73dc14aea82mr14029917b3a.12.1745272835770; Mon, 21 Apr 2025 15:00:35 -0700 (PDT) Received: from hu-molvera-lv.qualcomm.com (Global_NAT1.qualcomm.com. [129.46.96.20]) by smtp.gmail.com with ESMTPSA id d2e1a72fcca58-73dbf8c04c5sm7107917b3a.24.2025.04.21.15.00.34 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 21 Apr 2025 15:00:35 -0700 (PDT) From: Melody Olvera Date: Mon, 21 Apr 2025 15:00:13 -0700 Subject: [PATCH v5 06/10] phy: qcom: Add M31 based eUSB2 PHY driver Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20250421-sm8750_usb_master-v5-6-25c79ed01d02@oss.qualcomm.com> References: <20250421-sm8750_usb_master-v5-0-25c79ed01d02@oss.qualcomm.com> In-Reply-To: <20250421-sm8750_usb_master-v5-0-25c79ed01d02@oss.qualcomm.com> To: Vinod Koul , Kishon Vijay Abraham I , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Wesley Cheng , Greg Kroah-Hartman , Philipp Zabel , Bjorn Andersson , Konrad Dybcio , Catalin Marinas , Will Deacon Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Dmitry Baryshkov , Melody Olvera X-Mailer: b4 0.14.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1745272824; l=11817; i=melody.olvera@oss.qualcomm.com; s=20241204; h=from:subject:message-id; bh=lSejwJvTtArOmVHm59Z9mb4lkgk4H7ZYl+12Gv2Xb98=; b=p2iYUwJ+YcNCrOAM0lc0wLInxvng9T/oNvtMs1+WljfFyot43FYj+wTgbJmQW+7AaW/y4w6uZ edyWJKQBR1jAY3EnIxNWD5+qB6RNzz6A0PUSZ/890N9WwGnXPzMniYz X-Developer-Key: i=melody.olvera@oss.qualcomm.com; a=ed25519; pk=1DGLp3zVYsHAWipMaNZZTHR321e8xK52C9vuAoeca5c= X-Authority-Analysis: v=2.4 cv=cdrSrmDM c=1 sm=1 tr=0 ts=6806c005 cx=c_pps a=mDZGXZTwRPZaeRUbqKGCBw==:117 a=ouPCqIW2jiPt+lZRy3xVPw==:17 a=IkcTkHD0fZMA:10 a=XR8D0OoHHMoA:10 a=COk6AnOGAAAA:8 a=EUspDBNiAAAA:8 a=SaPFg9MOAsmIOgfY5tUA:9 a=QEXdDO2ut3YA:10 a=zc0IvFSfCIW2DFIPzwfm:22 a=TjNXssC_j7lpFel5tvFf:22 X-Proofpoint-ORIG-GUID: X-vch-9oh7g5KRHp6971dtFKRsAOyfwt X-Proofpoint-GUID: X-vch-9oh7g5KRHp6971dtFKRsAOyfwt X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1095,Hydra:6.0.680,FMLib:17.12.68.34 definitions=2025-04-21_10,2025-04-21_02,2024-11-22_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 suspectscore=0 phishscore=0 adultscore=0 mlxlogscore=999 malwarescore=0 clxscore=1015 spamscore=0 priorityscore=1501 lowpriorityscore=0 impostorscore=0 bulkscore=0 classifier=spam authscore=0 authtc=n/a authcc= route=outbound adjust=0 reason=mlx scancount=1 engine=8.19.0-2502280000 definitions=main-2504210173 From: Wesley Cheng SM8750 utilizes an eUSB2 PHY from M31. Add the initialization sequences to bring it out of reset and into an operational state. This differs to the M31 USB driver, in that the M31 eUSB2 driver will require a connection to an eUSB2 repeater. This PHY driver will handle the initialization of the associated eUSB2 repeater when required. Reviewed-by: Dmitry Baryshkov Signed-off-by: Wesley Cheng Signed-off-by: Melody Olvera --- drivers/phy/qualcomm/Kconfig | 10 + drivers/phy/qualcomm/Makefile | 1 + drivers/phy/qualcomm/phy-qcom-m31-eusb2.c | 325 ++++++++++++++++++++++++++++++ 3 files changed, 336 insertions(+) diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index 3cfb4c9d3d10dce49bb93b241f9b56c75b934601..5d55ed0bd198d786d31d5dbee8f32e6fbed875a9 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -167,6 +167,16 @@ config PHY_QCOM_UNIPHY_PCIE_28LP handles PHY initialization, clock management required after resetting the hardware and power management. +config PHY_QCOM_M31_EUSB + tristate "Qualcomm M31 eUSB2 PHY driver support" + depends on USB && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable this to support M31 EUSB2 PHY transceivers on Qualcomm + chips with DWC3 USB core. It supports initializing and cleaning + up of the associated USB repeater that is paired with the eUSB2 + PHY. + config PHY_QCOM_USB_HS tristate "Qualcomm USB HS PHY module" depends on USB_ULPI_BUS diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index 42038bc30974a376bb2e3749d57d0518a82c35fe..4a5907816c65ec15b85e1fa5d22003ee8e2a3e97 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_PHY_QCOM_EDP) += phy-qcom-edp.o obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_QCOM_M31_USB) += phy-qcom-m31.o +obj-$(CONFIG_PHY_QCOM_M31_EUSB) += phy-qcom-m31-eusb2.o obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o obj-$(CONFIG_PHY_QCOM_QMP_COMBO) += phy-qcom-qmp-combo.o phy-qcom-qmp-usbc.o diff --git a/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c new file mode 100644 index 0000000000000000000000000000000000000000..8746218914afbd814ca90639edd8e2cf47ff99f1 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define USB_PHY_UTMI_CTRL0 (0x3c) +#define SLEEPM BIT(0) + +#define USB_PHY_UTMI_CTRL5 (0x50) +#define POR BIT(1) + +#define USB_PHY_HS_PHY_CTRL_COMMON0 (0x54) +#define SIDDQ_SEL BIT(1) +#define SIDDQ BIT(2) +#define FSEL GENMASK(6, 4) +#define FSEL_38_4_MHZ_VAL (0x6) + +#define USB_PHY_HS_PHY_CTRL2 (0x64) +#define USB2_SUSPEND_N BIT(2) +#define USB2_SUSPEND_N_SEL BIT(3) + +#define USB_PHY_CFG0 (0x94) +#define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1) + +#define USB_PHY_CFG1 (0x154) +#define PLL_EN BIT(0) + +#define USB_PHY_FSEL_SEL (0xb8) +#define FSEL_SEL BIT(0) + +#define USB_PHY_XCFGI_39_32 (0x16c) +#define HSTX_PE GENMASK(3, 2) + +#define USB_PHY_XCFGI_71_64 (0x17c) +#define HSTX_SWING GENMASK(3, 0) + +#define USB_PHY_XCFGI_31_24 (0x168) +#define HSTX_SLEW GENMASK(2, 0) + +#define USB_PHY_XCFGI_7_0 (0x15c) +#define PLL_LOCK_TIME GENMASK(1, 0) + +#define M31_EUSB_PHY_INIT_CFG(o, b, v) \ +{ \ + .off = o, \ + .mask = b, \ + .val = v, \ +} + +struct m31_phy_tbl_entry { + u32 off; + u32 mask; + u32 val; +}; + +struct m31_eusb2_priv_data { + const struct m31_phy_tbl_entry *setup_seq; + unsigned int setup_seq_nregs; + const struct m31_phy_tbl_entry *override_seq; + unsigned int override_seq_nregs; + const struct m31_phy_tbl_entry *reset_seq; + unsigned int reset_seq_nregs; + unsigned int fsel; +}; + +static const struct m31_phy_tbl_entry m31_eusb2_setup_tbl[] = { + M31_EUSB_PHY_INIT_CFG(USB_PHY_CFG0, UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_UTMI_CTRL5, POR, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_CFG1, PLL_EN, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_FSEL_SEL, FSEL_SEL, 1), +}; + +static const struct m31_phy_tbl_entry m31_eusb_phy_override_tbl[] = { + M31_EUSB_PHY_INIT_CFG(USB_PHY_XCFGI_39_32, HSTX_PE, 0), + M31_EUSB_PHY_INIT_CFG(USB_PHY_XCFGI_71_64, HSTX_SWING, 7), + M31_EUSB_PHY_INIT_CFG(USB_PHY_XCFGI_31_24, HSTX_SLEW, 0), + M31_EUSB_PHY_INIT_CFG(USB_PHY_XCFGI_7_0, PLL_LOCK_TIME, 0), +}; + +static const struct m31_phy_tbl_entry m31_eusb_phy_reset_tbl[] = { + M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N_SEL, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_UTMI_CTRL0, SLEEPM, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL_COMMON0, SIDDQ_SEL, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL_COMMON0, SIDDQ, 0), + M31_EUSB_PHY_INIT_CFG(USB_PHY_UTMI_CTRL5, POR, 0), + M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N_SEL, 0), + M31_EUSB_PHY_INIT_CFG(USB_PHY_CFG0, UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0), +}; + +static const struct regulator_bulk_data m31_eusb_phy_vregs[] = { + { .supply = "vdd" }, + { .supply = "vdda12" }, +}; + +#define M31_EUSB_NUM_VREGS ARRAY_SIZE(m31_eusb_phy_vregs) + +struct m31eusb2_phy { + struct phy *phy; + void __iomem *base; + const struct m31_eusb2_priv_data *data; + enum phy_mode mode; + + struct regulator_bulk_data *vregs; + struct clk *clk; + struct reset_control *reset; + + struct phy *repeater; +}; + +static int m31eusb2_phy_write_readback(void __iomem *base, u32 offset, + const u32 mask, u32 val) +{ + u32 write_val; + u32 tmp; + + tmp = readl_relaxed(base + offset); + tmp &= ~mask; + write_val = tmp | val; + + writel_relaxed(write_val, base + offset); + + tmp = readl_relaxed(base + offset); + tmp &= mask; + + if (tmp != val) { + pr_err("write: %x to offset: %x FAILED\n", val, offset); + return -EINVAL; + } + + return 0; +} + +static int m31eusb2_phy_write_sequence(struct m31eusb2_phy *phy, + const struct m31_phy_tbl_entry *tbl, + int num) +{ + int i; + int ret; + + for (i = 0 ; i < num; i++, tbl++) { + dev_dbg(&phy->phy->dev, "Offset:%x BitMask:%x Value:%x", + tbl->off, tbl->mask, tbl->val); + + ret = m31eusb2_phy_write_readback(phy->base, + tbl->off, tbl->mask, + tbl->val << __ffs(tbl->mask)); + if (ret < 0) + return ret; + } + + return 0; +} + +static int m31eusb2_phy_set_mode(struct phy *uphy, enum phy_mode mode, int submode) +{ + struct m31eusb2_phy *phy = phy_get_drvdata(uphy); + + phy->mode = mode; + + return phy_set_mode_ext(phy->repeater, mode, submode); +} + +static int m31eusb2_phy_init(struct phy *uphy) +{ + struct m31eusb2_phy *phy = phy_get_drvdata(uphy); + const struct m31_eusb2_priv_data *data = phy->data; + int ret; + + ret = regulator_bulk_enable(M31_EUSB_NUM_VREGS, phy->vregs); + if (ret) { + dev_err(&uphy->dev, "failed to enable regulator, %d\n", ret); + return ret; + } + + ret = phy_init(phy->repeater); + if (ret) { + dev_err(&uphy->dev, "repeater init failed. %d\n", ret); + goto disable_vreg; + } + + ret = clk_prepare_enable(phy->clk); + if (ret) { + dev_err(&uphy->dev, "failed to enable cfg ahb clock, %d\n", ret); + goto disable_repeater; + } + + /* Perform phy reset */ + reset_control_assert(phy->reset); + udelay(5); + reset_control_deassert(phy->reset); + + m31eusb2_phy_write_sequence(phy, data->setup_seq, data->setup_seq_nregs); + m31eusb2_phy_write_readback(phy->base, + USB_PHY_HS_PHY_CTRL_COMMON0, FSEL, + FIELD_PREP(FSEL, data->fsel)); + m31eusb2_phy_write_sequence(phy, data->override_seq, data->override_seq_nregs); + m31eusb2_phy_write_sequence(phy, data->reset_seq, data->reset_seq_nregs); + + return 0; + +disable_repeater: + phy_exit(phy->repeater); +disable_vreg: + regulator_bulk_disable(M31_EUSB_NUM_VREGS, phy->vregs); + + return 0; +} + +static int m31eusb2_phy_exit(struct phy *uphy) +{ + struct m31eusb2_phy *phy = phy_get_drvdata(uphy); + + clk_disable_unprepare(phy->clk); + regulator_bulk_disable(M31_EUSB_NUM_VREGS, phy->vregs); + phy_exit(phy->repeater); + + return 0; +} + +static const struct phy_ops m31eusb2_phy_gen_ops = { + .init = m31eusb2_phy_init, + .exit = m31eusb2_phy_exit, + .set_mode = m31eusb2_phy_set_mode, + .owner = THIS_MODULE, +}; + +static int m31eusb2_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + const struct m31_eusb2_priv_data *data; + struct device *dev = &pdev->dev; + struct m31eusb2_phy *phy; + int ret; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + data = device_get_match_data(dev); + if (IS_ERR(data)) + return -EINVAL; + phy->data = data; + + phy->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->base)) + return PTR_ERR(phy->base); + + phy->reset = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(phy->reset)) + return PTR_ERR(phy->reset); + + phy->clk = devm_clk_get(dev, NULL); + if (IS_ERR(phy->clk)) + return dev_err_probe(dev, PTR_ERR(phy->clk), + "failed to get clk\n"); + + phy->phy = devm_phy_create(dev, NULL, &m31eusb2_phy_gen_ops); + if (IS_ERR(phy->phy)) + return dev_err_probe(dev, PTR_ERR(phy->phy), + "failed to create phy\n"); + + ret = devm_regulator_bulk_get_const(dev, M31_EUSB_NUM_VREGS, + m31_eusb_phy_vregs, &phy->vregs); + if (ret) + return dev_err_probe(dev, ret, + "failed to get regulator supplies\n"); + + phy_set_drvdata(phy->phy, phy); + + phy->repeater = devm_of_phy_get_by_index(dev, dev->of_node, 0); + if (IS_ERR(phy->repeater)) + return dev_err_probe(dev, PTR_ERR(phy->repeater), + "failed to get repeater\n"); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (!IS_ERR(phy_provider)) + dev_info(dev, "Registered M31 USB phy\n"); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct m31_eusb2_priv_data m31_eusb_v1_data = { + .setup_seq = m31_eusb2_setup_tbl, + .setup_seq_nregs = ARRAY_SIZE(m31_eusb2_setup_tbl), + .override_seq = m31_eusb_phy_override_tbl, + .override_seq_nregs = ARRAY_SIZE(m31_eusb_phy_override_tbl), + .reset_seq = m31_eusb_phy_reset_tbl, + .reset_seq_nregs = ARRAY_SIZE(m31_eusb_phy_reset_tbl), + .fsel = FSEL_38_4_MHZ_VAL, +}; + +static const struct of_device_id m31eusb2_phy_id_table[] = { + { .compatible = "qcom,sm8750-m31-eusb2-phy", .data = &m31_eusb_v1_data }, + { }, +}; +MODULE_DEVICE_TABLE(of, m31eusb2_phy_id_table); + +static struct platform_driver m31eusb2_phy_driver = { + .probe = m31eusb2_phy_probe, + .driver = { + .name = "qcom-m31eusb2-phy", + .of_match_table = m31eusb2_phy_id_table, + }, +}; + +module_platform_driver(m31eusb2_phy_driver); + +MODULE_AUTHOR("Wesley Cheng "); +MODULE_DESCRIPTION("eUSB2 Qualcomm M31 HSPHY driver"); +MODULE_LICENSE("GPL"); -- 2.48.1