mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jayesh Choudhary <j-choudhary@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <u-kumar1@ti.com>,
	<devarsht@ti.com>, <linux-kernel@vger.kernel.org>
Cc: <robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
	<kristo@kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <j-choudhary@ti.com>
Subject: [PATCH] arm64: dts: ti: k3-j721e-common-proc-board-infotainment: Fix nodes for dtbs warnings
Date: Thu, 24 Apr 2025 13:33:28 +0530	[thread overview]
Message-ID: <20250424080328.57671-1-j-choudhary@ti.com> (raw)

Fix hdmi-connector and tfp bridge node as per the bindings,
- remove 'digital' property which is required for DVI connector not HDMI
- Add 'ti,deskew' property which is a required property
- Fix ports property for tfp410 bridge
- Change node names appropriately

Redefine the ports for dss and for k3-j721e-common-proc-board.dts,
add reg property for the port (@0) to get rid of dtbs_warnings in
infotainment overlay when ports for dss are re-defined.

Fixes: 9c0fa304fa56 ("arm64: dts: ti: k3-j721e: Add overlay for J721E Infotainment Expansion Board")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
---
 ...-j721e-common-proc-board-infotainment.dtso | 57 +++++++++++--------
 .../dts/ti/k3-j721e-common-proc-board.dts     |  6 +-
 2 files changed, 38 insertions(+), 25 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso
index 65a7e54f0884..e4e5f941f20b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso
@@ -15,12 +15,11 @@
 #include "k3-pinctrl.h"
 
 &{/} {
-	hdmi-connector {
+	connector-hdmi {
 		compatible = "hdmi-connector";
 		label = "hdmi";
 		type = "a";
 		ddc-i2c-bus = <&main_i2c1>;
-		digital;
 		/* P12 - HDMI_HPD */
 		hpd-gpios = <&exp6 10 GPIO_ACTIVE_HIGH>;
 
@@ -31,28 +30,32 @@ hdmi_connector_in: endpoint {
 		};
 	};
 
-	dvi-bridge {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	bridge-dvi {
 		compatible = "ti,tfp410";
 		/* P10 - HDMI_PDn */
 		powerdown-gpios = <&exp6 8 GPIO_ACTIVE_LOW>;
+		ti,deskew = <0>;
 
-		port@0 {
-			reg = <0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
 
-			tfp410_in: endpoint {
-				remote-endpoint = <&dpi_out0>;
-				pclk-sample = <1>;
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_out0>;
+					pclk-sample = <1>;
+				};
 			};
-		};
 
-		port@1 {
-			reg = <1>;
+			port@1 {
+				reg = <1>;
 
-			tfp410_out: endpoint {
-				remote-endpoint =
-					<&hdmi_connector_in>;
+				tfp410_out: endpoint {
+					remote-endpoint =
+						<&hdmi_connector_in>;
+				};
 			};
 		};
 	};
@@ -148,17 +151,23 @@ p11-hog {
 &dss {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dss_vout0_pins_default>;
-};
 
-&dss_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	port@1 {
-		reg = <1>;
+		port@0 {
+			reg = <0>;
+			dpi0_out: endpoint {
+				remote-endpoint = <&dp0_in>;
+			};
+		};
 
-		dpi_out0: endpoint {
-			remote-endpoint = <&tfp410_in>;
+		port@1 {
+			reg = <1>;
+			dpi_out0: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 4421852161dd..e3d0ef6913b2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -804,7 +804,11 @@ &dss {
 };
 
 &dss_ports {
-	port {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
 		dpi0_out: endpoint {
 			remote-endpoint = <&dp0_in>;
 		};
-- 
2.34.1


             reply	other threads:[~2025-04-24  8:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-24  8:03 Jayesh Choudhary [this message]
2025-04-25 12:47 ` Kumar, Udit
2025-04-25 21:08 ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250424080328.57671-1-j-choudhary@ti.com \
    --to=j-choudhary@ti.com \
    --cc=conor+dt@kernel.org \
    --cc=devarsht@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    --cc=u-kumar1@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®