From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
To: linux-kernel@vger.kernel.org
Cc: "Alexandre Torgue" <alexandre.torgue@foss.st.com>,
linux-amarula@amarulasolutions.com,
"Dario Binacchi" <dario.binacchi@amarulasolutions.com>,
"Conor Dooley" <conor+dt@kernel.org>,
"David Jander" <david@protonic.nl>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Leonard Göhrs" <l.goehrs@pengutronix.de>,
"Marc Kleine-Budde" <mkl@pengutronix.de>,
"Marek Vasut" <marex@denx.de>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Oleksij Rempel" <o.rempel@pengutronix.de>,
"Roan van Dijk" <roan@protonic.nl>,
"Rob Herring" <robh@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: [PATCH 8/8] ARM: dts: stm32: support STM32h747i-disco board
Date: Sun, 27 Apr 2025 09:43:27 +0200 [thread overview]
Message-ID: <20250427074404.3278732-9-dario.binacchi@amarulasolutions.com> (raw)
In-Reply-To: <20250427074404.3278732-1-dario.binacchi@amarulasolutions.com>
The board includes an STM32H747XI SoC with the following resources:
- 2 Mbytes Flash
- 1 Mbyte SRAM
- LCD-TFT controller
- MIPI-DSI interface
- FD-CAN
- USB 2.0 high-speed/full-speed
- Ethernet MAC
- camera interface
Detailed information can be found at:
https://www.st.com/en/evaluation-tools/stm32h747i-disco.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
arch/arm/boot/dts/st/Makefile | 1 +
arch/arm/boot/dts/st/stm32h747i-disco.dts | 136 ++++++++++++++++++++++
2 files changed, 137 insertions(+)
create mode 100644 arch/arm/boot/dts/st/stm32h747i-disco.dts
diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile
index 60d55516f723..c66959edac12 100644
--- a/arch/arm/boot/dts/st/Makefile
+++ b/arch/arm/boot/dts/st/Makefile
@@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32746g-eval.dtb \
stm32h743i-eval.dtb \
stm32h743i-disco.dtb \
+ stm32h747i-disco.dtb \
stm32h750i-art-pi.dtb \
stm32mp133c-prihmb.dtb \
stm32mp135f-dhcor-dhsbc.dtb \
diff --git a/arch/arm/boot/dts/st/stm32h747i-disco.dts b/arch/arm/boot/dts/st/stm32h747i-disco.dts
new file mode 100644
index 000000000000..99f0255dae8e
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32h747i-disco.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+/dts-v1/;
+#include "stm32h743.dtsi"
+#include "stm32h7-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "STMicroelectronics STM32H747i-Discovery board";
+ compatible = "st,stm32h747i-disco", "st,stm32h747";
+
+ chosen {
+ bootargs = "root=/dev/ram";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@d0000000 {
+ device_type = "memory";
+ reg = <0xd0000000 0x2000000>;
+ };
+
+ aliases {
+ serial0 = &usart1;
+ serial1 = &uart8;
+ };
+
+ v3v3: regulator-v3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-green {
+ gpios = <&gpioi 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ led-orange {
+ gpios = <&gpioi 13 GPIO_ACTIVE_LOW>;
+ };
+ led-red {
+ gpios = <&gpioi 14 GPIO_ACTIVE_LOW>;
+ };
+ led-blue {
+ gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ button-0 {
+ label = "User";
+ linux,code = <KEY_WAKEUP>;
+ gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
+ };
+ button-1 {
+ label = "JoySel";
+ linux,code = <KEY_ENTER>;
+ gpios = <&gpiok 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ };
+ button-2 {
+ label = "JoyDown";
+ linux,code = <KEY_DOWN>;
+ gpios = <&gpiok 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ };
+ button-3 {
+ label = "JoyUp";
+ linux,code = <KEY_UP>;
+ gpios = <&gpiok 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ };
+ button-4 {
+ label = "JoyLeft";
+ linux,code = <KEY_LEFT>;
+ gpios = <&gpiok 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ };
+ button-5 {
+ label = "JoyRight";
+ linux,code = <KEY_RIGHT>;
+ gpios = <&gpiok 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ };
+ };
+};
+
+&clk_hse {
+ clock-frequency = <25000000>;
+};
+
+&mac {
+ status = "disabled";
+ pinctrl-0 = <ðernet_rmii>;
+ pinctrl-names = "default";
+ phy-mode = "rmii";
+ phy-handle = <&phy0>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ cd-gpios = <&gpioi 8 GPIO_ACTIVE_LOW>;
+ broken-cd;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&usart1 {
+ pinctrl-0 = <&usart1_pins_b>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart8 {
+ pinctrl-0 = <&uart8_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};
--
2.43.0
next prev parent reply other threads:[~2025-04-27 7:44 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-27 7:43 [PATCH 0/8] Support " Dario Binacchi
2025-04-27 7:43 ` [PATCH 1/8] ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles Dario Binacchi
2025-04-27 7:43 ` [PATCH 2/8] dt-bindings: arm: stm32: add compatible for stm32h747i-disco board Dario Binacchi
2025-04-28 8:38 ` Krzysztof Kozlowski
2025-04-27 7:43 ` [PATCH 3/8] ARM: stm32: add a new SoC - STM32H747 Dario Binacchi
2025-04-27 7:43 ` [PATCH 4/8] clk: stm32h7: rename USART{7,8}_CK to UART{7,8}_CK Dario Binacchi
2025-04-28 9:17 ` Krzysztof Kozlowski
2025-04-27 7:43 ` [PATCH 5/8] ARM: dts: stm32: add uart8 node for stm32h743 MCU Dario Binacchi
2025-04-27 7:43 ` [PATCH 6/8] ARM: dts: stm32: add pin map for UART8 controller on stm32h743 Dario Binacchi
2025-04-27 7:43 ` [PATCH 7/8] ARM: dts: stm32: add an extra pin map for USART1 " Dario Binacchi
2025-04-27 7:43 ` Dario Binacchi [this message]
2025-04-30 7:21 ` [PATCH 0/8] Support STM32h747i-disco board Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250427074404.3278732-9-dario.binacchi@amarulasolutions.com \
--to=dario.binacchi@amarulasolutions.com \
--cc=alexandre.torgue@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=david@protonic.nl \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=l.goehrs@pengutronix.de \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=marex@denx.de \
--cc=mcoquelin.stm32@gmail.com \
--cc=mkl@pengutronix.de \
--cc=o.rempel@pengutronix.de \
--cc=roan@protonic.nl \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®