[PATCH v7 05/11] regmap: irq: Add support for chips without separate IRQ status

[Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>]

Some GPIO chips allow to rise an IRQ on GPIO level changes but do not
provide an IRQ status for each separate line: only the current gpio
level can be retrieved.

Add support for these chips, emulating IRQ status by comparing GPIO
levels with the levels during the previous interrupt.

Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/base/regmap/regmap-irq.c | 97 +++++++++++++++++++++++++++-------------
 include/linux/regmap.h           |  3 ++
 2 files changed, 69 insertions(+), 31 deletions(-)

diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 6c6869188c31..c1b0dcd7280f 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -6,6 +6,7 @@
 //
 // Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
 
+#include <linux/array_size.h>
 #include <linux/device.h>
 #include <linux/export.h>
 #include <linux/interrupt.h>
@@ -33,6 +34,7 @@ struct regmap_irq_chip_data {
 	void *status_reg_buf;
 	unsigned int *main_status_buf;
 	unsigned int *status_buf;
+	unsigned int *prev_status_buf;
 	unsigned int *mask_buf;
 	unsigned int *mask_buf_def;
 	unsigned int *wake_buf;
@@ -332,27 +334,13 @@ static inline int read_sub_irq_data(struct regmap_irq_chip_data *data,
 	return ret;
 }
 
-static irqreturn_t regmap_irq_thread(int irq, void *d)
+static int read_irq_data(struct regmap_irq_chip_data *data)
 {
-	struct regmap_irq_chip_data *data = d;
 	const struct regmap_irq_chip *chip = data->chip;
 	struct regmap *map = data->map;
 	int ret, i;
-	bool handled = false;
 	u32 reg;
 
-	if (chip->handle_pre_irq)
-		chip->handle_pre_irq(chip->irq_drv_data);
-
-	if (chip->runtime_pm) {
-		ret = pm_runtime_get_sync(map->dev);
-		if (ret < 0) {
-			dev_err(map->dev, "IRQ thread failed to resume: %d\n",
-				ret);
-			goto exit;
-		}
-	}
-
 	/*
 	 * Read only registers with active IRQs if the chip has 'main status
 	 * register'. Else read in the statuses, using a single bulk read if
@@ -379,10 +367,8 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
 			reg = data->get_irq_reg(data, chip->main_status, i);
 			ret = regmap_read(map, reg, &data->main_status_buf[i]);
 			if (ret) {
-				dev_err(map->dev,
-					"Failed to read IRQ status %d\n",
-					ret);
-				goto exit;
+				dev_err(map->dev, "Failed to read IRQ status %d\n", ret);
+				return ret;
 			}
 		}
 
@@ -398,10 +384,8 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
 				ret = read_sub_irq_data(data, b);
 
 				if (ret != 0) {
-					dev_err(map->dev,
-						"Failed to read IRQ status %d\n",
-						ret);
-					goto exit;
+					dev_err(map->dev, "Failed to read IRQ status %d\n", ret);
+					return ret;
 				}
 			}
 
@@ -418,9 +402,8 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
 				       data->status_reg_buf,
 				       chip->num_regs);
 		if (ret != 0) {
-			dev_err(map->dev, "Failed to read IRQ status: %d\n",
-				ret);
-			goto exit;
+			dev_err(map->dev, "Failed to read IRQ status: %d\n", ret);
+			return ret;
 		}
 
 		for (i = 0; i < data->chip->num_regs; i++) {
@@ -436,7 +419,7 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
 				break;
 			default:
 				BUG();
-				goto exit;
+				return -EIO;
 			}
 		}
 
@@ -447,10 +430,8 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
 			ret = regmap_read(map, reg, &data->status_buf[i]);
 
 			if (ret != 0) {
-				dev_err(map->dev,
-					"Failed to read IRQ status: %d\n",
-					ret);
-				goto exit;
+				dev_err(map->dev, "Failed to read IRQ status: %d\n", ret);
+				return ret;
 			}
 		}
 	}
@@ -459,6 +440,42 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
 		for (i = 0; i < data->chip->num_regs; i++)
 			data->status_buf[i] = ~data->status_buf[i];
 
+	return 0;
+}
+
+static irqreturn_t regmap_irq_thread(int irq, void *d)
+{
+	struct regmap_irq_chip_data *data = d;
+	const struct regmap_irq_chip *chip = data->chip;
+	struct regmap *map = data->map;
+	int ret, i;
+	bool handled = false;
+	u32 reg;
+
+	if (chip->handle_pre_irq)
+		chip->handle_pre_irq(chip->irq_drv_data);
+
+	if (chip->runtime_pm) {
+		ret = pm_runtime_get_sync(map->dev);
+		if (ret < 0) {
+			dev_err(map->dev, "IRQ thread failed to resume: %d\n", ret);
+			goto exit;
+		}
+	}
+
+	ret = read_irq_data(data);
+	if (ret < 0)
+		goto exit;
+
+	if (chip->status_is_level) {
+		for (i = 0; i < data->chip->num_regs; i++) {
+			unsigned int val = data->status_buf[i];
+
+			data->status_buf[i] ^= data->prev_status_buf[i];
+			data->prev_status_buf[i] = val;
+		}
+	}
+
 	/*
 	 * Ignore masked IRQs and ack if we need to; we ack early so
 	 * there is no race between handling and acknowledging the
@@ -705,6 +722,13 @@ int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
 	if (!d->status_buf)
 		goto err_alloc;
 
+	if (chip->status_is_level) {
+		d->prev_status_buf = kcalloc(chip->num_regs, sizeof(*d->prev_status_buf),
+					     GFP_KERNEL);
+		if (!d->prev_status_buf)
+			goto err_alloc;
+	}
+
 	d->mask_buf = kcalloc(chip->num_regs, sizeof(*d->mask_buf),
 			      GFP_KERNEL);
 	if (!d->mask_buf)
@@ -881,6 +905,15 @@ int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
 		}
 	}
 
+	/* Store current levels */
+	if (chip->status_is_level) {
+		ret = read_irq_data(d);
+		if (ret < 0)
+			goto err_alloc;
+
+		memcpy(d->prev_status_buf, d->status_buf, array_size(d->prev_status_buf));
+	}
+
 	ret = regmap_irq_create_domain(fwnode, irq_base, chip, d);
 	if (ret)
 		goto err_alloc;
@@ -908,6 +941,7 @@ int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
 	kfree(d->mask_buf);
 	kfree(d->main_status_buf);
 	kfree(d->status_buf);
+	kfree(d->prev_status_buf);
 	kfree(d->status_reg_buf);
 	if (d->config_buf) {
 		for (i = 0; i < chip->num_config_bases; i++)
@@ -985,6 +1019,7 @@ void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *d)
 	kfree(d->main_status_buf);
 	kfree(d->status_reg_buf);
 	kfree(d->status_buf);
+	kfree(d->prev_status_buf);
 	if (d->config_buf) {
 		for (i = 0; i < d->chip->num_config_bases; i++)
 			kfree(d->config_buf[i]);
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index d17c5ea3d55d..02b83f5499b8 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -1641,6 +1641,8 @@ struct regmap_irq_chip_data;
  * @ack_invert:  Inverted ack register: cleared bits for ack.
  * @clear_ack:  Use this to set 1 and 0 or vice-versa to clear interrupts.
  * @status_invert: Inverted status register: cleared bits are active interrupts.
+ * @status_is_level: Status register is actuall signal level: Xor status
+ *		     register with previous value to get active interrupts.
  * @wake_invert: Inverted wake register: cleared bits are wake enabled.
  * @type_in_mask: Use the mask registers for controlling irq type. Use this if
  *		  the hardware provides separate bits for rising/falling edge
@@ -1704,6 +1706,7 @@ struct regmap_irq_chip {
 	unsigned int ack_invert:1;
 	unsigned int clear_ack:1;
 	unsigned int status_invert:1;
+	unsigned int status_is_level:1;
 	unsigned int wake_invert:1;
 	unsigned int type_in_mask:1;
 	unsigned int clear_on_unmask:1;

-- 
2.39.5