From: Judith Mendez <jm@ti.com>
To: Judith Mendez <jm@ti.com>, Nishanth Menon <nm@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>
Cc: Tero Kristo <kristo@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Moteen Shah <m-shah@ti.com>, Udit Kumar <u-kumar1@ti.com>
Subject: [PATCH v3 1/3] arm64: dts: ti: k3-am6*: Add boot phase flag to support MMC boot
Date: Tue, 29 Apr 2025 10:14:52 -0500 [thread overview]
Message-ID: <20250429151454.4160506-2-jm@ti.com> (raw)
In-Reply-To: <20250429151454.4160506-1-jm@ti.com>
The bootph-all flag was introduced in dt-schema
(dtschema/schemas/bootph.yaml) to define node usage across
different boot phases.
For eMMC and SD boot modes, voltage regulator nodes, io-expander
nodes, gpio nodes, and MMC nodes need to be present in all boot
stages, so add missing bootph-all phase flag to these nodes to
support SD boot and eMMC boot.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
---
arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts | 12 ++++++++++++
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 2 ++
2 files changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
index 8e9fc00a6b3c..aafdb90c0eb7 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
@@ -69,6 +69,7 @@ vddshv_sdio: regulator-4 {
gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
states = <1800000 0x0>,
<3300000 0x1>;
+ bootph-all;
};
};
@@ -77,12 +78,14 @@ vddshv_sdio_pins_default: vddshv-sdio-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
>;
+ bootph-all;
};
main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (C13) UART0_RTSn.GPIO1_23 */
>;
+ bootph-all;
};
pmic_irq_pins_default: pmic-irq-default-pins {
@@ -118,6 +121,7 @@ exp1: gpio@22 {
pinctrl-names = "default";
pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+ bootph-all;
};
exp2: gpio@23 {
@@ -229,6 +233,14 @@ &tlv320aic3106 {
DVDD-supply = <&buck2_reg>;
};
+&main_gpio0 {
+ bootph-all;
+};
+
+&main_gpio1 {
+ bootph-all;
+};
+
&gpmc0 {
ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index a9557ee73b83..22be41d46eb5 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -313,6 +313,7 @@ AM62AX_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
>;
+ bootph-all;
};
main_mmc1_pins_default: main-mmc1-default-pins {
@@ -634,6 +635,7 @@ &sdhci0 {
pinctrl-names = "default";
pinctrl-0 = <&main_mmc0_pins_default>;
disable-wp;
+ bootph-all;
};
&sdhci1 {
--
2.49.0
next prev parent reply other threads:[~2025-04-29 15:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-29 15:14 [PATCH v3 0/3] Misc MMC updates Judith Mendez
2025-04-29 15:14 ` Judith Mendez [this message]
2025-04-29 15:14 ` [PATCH v3 2/3] arm64: dts: ti: k3-am62*: Add non-removable flag for eMMC Judith Mendez
2025-04-29 15:14 ` [PATCH v3 3/3] arm64: dts: ti: k3-am6*: Remove disable-wp " Judith Mendez
2025-05-02 14:43 ` [PATCH v3 0/3] Misc MMC updates Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250429151454.4160506-2-jm@ti.com \
--to=jm@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m-shah@ti.com \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®